@@DenisMehanizator к этому делу надо подходить серьездно😉 я завтра утром два ведра колодезной воды наберу и вперёд 😁 но я этим итак ежедневно занимаюсь уже лет так девять😅
Great work, as always! I've watched tons of your videos. Always an enjoyable experience. 😊 Regarding the MTZ 952, what is its actual max speed? I find contradicting information online. Some say it only drives up to 30km/h, while others state 40km/h is its max traveling speed. I would greatly appreciate it, if you told me how fast your model goes. Thank you! ❤
It really depens on gearing. They can go as fast as 45. But the tractor you are asking about is with a 5 speed gearbox and max speed around ~30. But some of my tractors also drive around 35-37 max.
Do there tractors have blowby through the dipstick . I tried buying 2 different MTZ tractors and both blew oil through the dipstick pipe. Is this normal when cold ...or hot ?
I really like this one, one day I might buy this model. Can you tell me which one is better, 892 or 952? If I am not mistaken they have the same engine but different gearbox. Are there any other differences?
Rear linkage is also different. 892 should have the old-school (dual-acting, push-pull type) linkage and 952 has the newer style linkage as modern tractors have.
This one has a different gearbox also. It's 4 speed with syncros. But the gearboxes should be interchangeable and I kind of like the 9 speed more.. And a different front axle on the 952 - that's the strongest one they have. And depending on the year and model different hydraulic systems were fitted. Mine has a German made hydraulic control valve system with I believe Italian rear 3 link system - but you can bolt on the previous model etc. But they are still the same Lego type as 820.. You can basically interchange a lot of the parts.
good video as usual. these days I will change the brakes to new ones on my 820. Do you think they should be completely dry or should the balls be greased? I have heard different
@@hrz4x4 yes. Lucky you. I looked at the new brakes today, They are greasy from the store, so I gues they should be like that. I heard a time ago that if you clean/change and let the brakes be dry they work a lot better. In my case the old brakes locked them self if I push the pedal, and I need to go backwards to let them loose.. really scary in higher speed.
@@simonbarkman2593 I have that locking on one of the tractors. If I brake it will lock the wheel(s) instantly - but it will not stay locked. So the brakes are some day next thing to look at as none of my tractors really have brakes that you could call good. If you have grease on the friction material - that should be cleaned off. And on the mating surface also.. But other than that more grease is always better than none.
@@simonbarkman2593 the old style brakes have to be bone dry, and they are called self locking. It saves foot pressure but shouldn't stay on. My 50 and 52 have got these and they work well with occasional adjustment. Not sure when they changed to wet brakes. If you have the old brakes, they are very easy to strip down, turn the wheels inside out to give you more room.
@@warrenblain2365 okey. I have bought the two disk with balls inside combined with feathers. Because the old ones was bad. But when I opened the new ones they are really greased. It’s possible it’s dry inside and greased outside so the metal wouldn’t rust. I don’t no, I haven’t hade the time to get in to it yet,
@@hrz4x4 Oh, I heard that something like this happens... even with new original tractors that comes from manufacturer with turbo. I hope it will work fine now. Nice job. Looking forward to the new season.:D
@@hrz4x4 Pärast jõuab see sodi pihustitesse ja kuna diiselkütuses on ka vett siis lähevad ka otsad lõpuks ära, kui filtreerimata sodi läbi lastakse. Ma ise olen kasutanud tänapäeva kütusega cleanflow lisandut. Praktikas toimib väga hästi. 1x aastas tasuks kõik filtrid üle pesta ja ära vahetada, seda kinnitab ka enda kogemus.
I hope all is going well with your MTZ Man ……thanks for sharing.
Ну наконец-то! Давно видосов не было. Чешка супер👍👍👍
Приветствую 🤝! Да я тоже переживал... С праздником крещения!
@@DenisMehanizator привет Денис 🤝 спасибо и тебя с праздником крещения, прорубь приготовил? 😉👍
Прорубь не моя тема, от одного вида сразу воспаление лёгких 🥶😂!
@@DenisMehanizator к этому делу надо подходить серьездно😉 я завтра утром два ведра колодезной воды наберу и вперёд 😁 но я этим итак ежедневно занимаюсь уже лет так девять😅
Молодец 👏! Закаливание сильная вещь!!!
I just bought a 560 model. It's a lot of tractor 🚜 with a lot of extras for what I paid for it. Thanks for the video.
Greeting from Poland 👋
Hehe
Majster teraz Twoja kolej na film😎. Pozdro
@@mario11117 chyba był wczoraj film
Hello there!
@@hrz4x4
I've been watching you for a long time and I respect this work
I have changed fuel lines with shiny metal ones. Looks nice. Good job!
Thank you!
Ə
Великолепно звучит! Отличное видео.
Спасибо!
Thanks for your efforts friend
Thanks!
Great to see a restoration on another Belarus!! Top job!!
Glad you like it!
Greeting from Poland 😀
Pozdrowienia z Polski
Uwielbiam was oglądać 😊
Greetings to Poland!
красавчик как всегда....))
Thanks!
W końcu filmy 🙂👍
Tak
Po Polsku też można? Pozdrawiam!!
Również pozdrawiam👍👍💪
Witam i pozdrawiam z mazowieckiego
@@wodymao7468 no to jest nas dwóch z mazowsza
Greeting from România!✋ Good job.
Greetings to Romania!
@@hrz4x4 I learning from you,thanks for your post!
Finally! I missed you video
Thanks!
@@hrz4x4 و
You’re back!
I never left ;)
Лайк. Отлично сделал! 👍👍👍👍👍
Thanks!
Лайк от канал Пасека Таджикистан спасибо за видео удачи тебе
Parabéns pelo trabalho, abraço aqui do Brasil....👏👏👏👏🇧🇷🇧🇷🇧🇷
Head uut aastat! Wishing you all the best in 2021!
Thanks. You too! Happy 2021.
These are really good tractors :)
Yes they are!
Amazing Sound!
Glad you like it!
Good job😊
Thanks!
Звук-супер
Excellent
Great work, as always! I've watched tons of your videos. Always an enjoyable experience. 😊
Regarding the MTZ 952, what is its actual max speed?
I find contradicting information online. Some say it only drives up to 30km/h, while others state 40km/h is its max traveling speed.
I would greatly appreciate it, if you told me how fast your model goes. Thank you! ❤
It really depens on gearing. They can go as fast as 45. But the tractor you are asking about is with a 5 speed gearbox and max speed around ~30. But some of my tractors also drive around 35-37 max.
@@hrz4x4 Thank you so much for the valuable information!
З нижніх оборотів працює! Це добре!
Finally a new video
я тоже недавно поставил Чешскую турбину вместо ткр 6,свистит аж душа радуется))))
отличный! благодарю вас
Hello.
Finally new video. This is your tractor?
Greeting from poland
Yes, thanks, Greetings to Poland!
Mój 1025 chodzi tak samo pozdrawiam ;)
Fajne!
Do you pained the Rims himself?
Do there tractors have blowby through the dipstick . I tried buying 2 different MTZ tractors and both blew oil through the dipstick pipe. Is this normal when cold ...or hot ?
Hello, can you tell me please how the disposable fuel filter system that you installed is called or where can i find it?
All the newer type Belaruses have that system. Just look for "newer" type belarus fuel filter and I am sure you will find one.
@@hrz4x4 Thank you sir!
Why did you switch to disposable fuel filter system?
Yes, I have done it on all my tractors. It's way easier to maintain and I believe it's also better.
@@hrz4x4 where did you buy the adapter plate?
@@gumelini1 Which plate? The fuel filter housing?
@@hrz4x4 yes
Hi
Are this engines realiables and good?
Regards!
It's quite good. If you have some time and balance it right it will probably last a "lifetime".
Witam. Regulator siły pod fotelem idzie naprawić czy trzeba nowy montować . MTZ 82 stary typ pytam się dobrego fachowca 👍
I really like this one, one day I might buy this model. Can you tell me which one is better, 892 or 952? If I am not mistaken they have the same engine but different gearbox. Are there any other differences?
Rear linkage is also different. 892 should have the old-school (dual-acting, push-pull type) linkage and 952 has the newer style linkage as modern tractors have.
820 vs 952 What is different engine spare parts beside turbo ? 🙏😍
This one has a different gearbox also. It's 4 speed with syncros. But the gearboxes should be interchangeable and I kind of like the 9 speed more.. And a different front axle on the 952 - that's the strongest one they have. And depending on the year and model different hydraulic systems were fitted. Mine has a German made hydraulic control valve system with I believe Italian rear 3 link system - but you can bolt on the previous model etc. But they are still the same Lego type as 820.. You can basically interchange a lot of the parts.
Hey, I want to ask you, that's why you chose c14 101 turbo? Besauce there are more choices c14 127, c14 126, k27, k26 speaking about ČZ
It was available as a direct replacement for the factory turbo from the belarus dealership. No other reason.
How's the thought of biginta Chevrolet
vao👍
Does this tractor have intercooler?
No.
Yo are finaly bac
I never left ;)
good video as usual. these days I will change the brakes to new ones on my 820. Do you think they should be completely dry or should the balls be greased? I have heard different
I don't know. I have never seen/been inside the brake housings yet.. Lucky me I guess.
@@hrz4x4 yes. Lucky you. I looked at the new brakes today, They are greasy from the store, so I gues they should be like that. I heard a time ago that if you clean/change and let the brakes be dry they work a lot better. In my case the old brakes locked them self if I push the pedal, and I need to go backwards to let them loose.. really scary in higher speed.
@@simonbarkman2593 I have that locking on one of the tractors. If I brake it will lock the wheel(s) instantly - but it will not stay locked. So the brakes are some day next thing to look at as none of my tractors really have brakes that you could call good. If you have grease on the friction material - that should be cleaned off. And on the mating surface also.. But other than that more grease is always better than none.
@@simonbarkman2593 the old style brakes have to be bone dry, and they are called self locking. It saves foot pressure but shouldn't stay on. My 50 and 52 have got these and they work well with occasional adjustment.
Not sure when they changed to wet brakes.
If you have the old brakes, they are very easy to strip down, turn the wheels inside out to give you more room.
@@warrenblain2365 okey. I have bought the two disk with balls inside combined with feathers. Because the old ones was bad. But when I opened the new ones they are really greased. It’s possible it’s dry inside and greased outside so the metal wouldn’t rust. I don’t no, I haven’t hade the time to get in to it yet,
Nice. The old turbo was working out of order?
Old one was making the sound but not the boost... I need the boost more than sound :)
@@hrz4x4 Oh, I heard that something like this happens... even with new original tractors that comes from manufacturer with turbo. I hope it will work fine now. Nice job. Looking forward to the new season.:D
Привет! Чем отличаются мтз89.2 от 952? И какой трактор лучше или вообще 1025?
Здравствуйте, у 952 синхронизированная кпп, у 892 нет. У 1025 кпп и мост с 1221.
@@bursak1989 спасибо за ответ! 👍 собираюсь трактор купить вот и спрашиваю какой взять! Но хочется все-таки 1025!
@@user-tt7ir8bb7w в наших краях 1025 греется и нужно радиатор больший ставить.
How many bar turbopressure do you have on this turbo?
I don't know. I have not measured it.
What was the difference between the two czech ones?
@@iankunzli1189 (Wrong) One had vacuum operated wastegate. Both are used on MTZ engines btw.
How do you now when the turbo dont gives the boost?
@@iankunzli1189 Measure the boost. And you should feel (during work) when the turbo starts working.
👍👍👍👍
please tell me will this turbo fit on my mtz1221
Probably. They have fitted different turbos for MTZ, you would have to check it yourself to be 100% sure.
thanks for replay
Вы слышали про гонки на тракторах в россии? Интересна Вам эта тема?
Да, я видел несколько видеороликов о гонках на тракторах с CZcams.
С14_198 не подходит?
What kind od turbo is it?
Czech Made (CZ) turbo, type: C14-101-01
1000 ✋🇰🇿
Hola como estas por motivo cambias el turbo saludos desde colombia
Saludos a Colombia. El turbo original no es muy bueno y hay disponibles de mejor calidad.
я плистину кріплення для фільтра сам робив в нас вона коштує 25$. А роботи на пів години!
Дуже добре!
To wasz belarus?
Olen veel hullemat kütusefiltrit puhatanud,mis oli laeni roostet täis ja mingit ollust.
Mul on ka jubedamaid olnud.. Tavaline on ju see, et filter visatakse seest välja, kui see ei tööta...
@@hrz4x4 Pärast jõuab see sodi pihustitesse ja kuna diiselkütuses on ka vett siis lähevad ka otsad lõpuks ära, kui filtreerimata sodi läbi lastakse. Ma ise olen kasutanud tänapäeva kütusega cleanflow lisandut. Praktikas toimib väga hästi. 1x aastas tasuks kõik filtrid üle pesta ja ära vahetada, seda kinnitab ka enda kogemus.
@@SuperMAZ007 Selle uue biolisandiga ei tea üldse, mis toimuma hakkab. Väidetavalt pidi seal vetikas sees kasvama hakkama, kui kütus kaua seisab...
@@hrz4x4 Ma vetikaid pole näinud aga ära riknemist küll. Hulgi ostes ehk alates 1t on võimalik saada ilma biolisandita diiselkütust.
Diesel filter comes from?
What do you mean? It's MTZ original bracket and filter is standard.
@@hrz4x4 sorry I thougt that it is different type from other engine. Regards👍
To turbo je od nás Česká republika...
Díky České republice za turbo!
@@hrz4x4 Nech chodí...
Where are you from?
czcams.com/users/hrz4x4about
Первый
А че у вас снега нет?у нас дахрена привезти?
Это было снято перед снегом.
Новый трактор купили?
Да. Всего ~20 лет. Очень новый.
@@hrz4x4 а где тот МТЗ 82?
Болша видео будет?
Покупал новый да. где синый трактор
czcams.com/video/LCkeLWbWkp4/video.html
Класс только грязный трактор
Здесь металлолом, а не трактор.