From cold 2 weeks without start the car is fine and ready for the streets, new trans., Cooler new radiator swap, new fans , new down pipes and X pipe..
I will try my best to post more videos for sure, 40% of the work was made by my self, with the help of a friend of the machine shop who help me with the valve seats angles and stuff. Other good friend who own a muffler welding shop who help me to build the stainless steel manifold for the TT set up. And the wiring was made by a fuel tech specialist tuner friend of my and my self ,I help a lot. The car is all made in 🇵🇷 Puerto Rico 🇺🇸
Schmitty_Love yes it can be daily driven , for my kind of experience with this project it was not that difficult but inpatients yes a lot. It took me for about 10 month just because I lived in Puerto Rico and the 70% of the parts I ordered to USA and I have to wait for it, including the transmission and the shipping cargo company waited 3 months 😡 but if you are already in the USA area for sure you can build it all in like 3 month. After all it is a good experience.
fggbjdgd well I have no idea how much I spend, I just bough parts and parts but probably I could say I past the 17k about money you can build your car but it depends of your goals in it. About to build it is not that difficult to build ,to me more difficult was find the part just because for these car there’s not much parts to choose. That makes it difficult. The rest of it is easy bred. I hope You can find your goal and built it, then send me some videos. 😬👍🏼
Toyota supra 1997 mk4 mishimoto X line 3 row, all you have to do is cut the nipples on both sides and welded on the original measures radiator suport are on Lexus Ls400, wish is more in the middle. If you are using the top hose original don't fit, you have to find on your local autoparts store one that works. I use -AN on both side weld the fittings and braided hose.
I wanna turn my 99 LS400 into a sleeper. Did you have to build the bottom end? And how much HP can the Trans Handle? Cause I was thinking of running Twin Mid Mount T4's and start at 6 to 8lbs of boost. Of course I would top end port and cams. What system are you running and fuel?
Hello, for fuel i have two WALLBRO 425 i think and straight lines braided AN-8 to front split for fuel rail in AN-8 and retuned with AN-6 with a 2,600cc injectors from Bosch. And i don’t have any issues. But if i need to replace i will use one fuel pump from Hellcat those fuel pump are crazy good. About HP i have no idea never ran on rollers i tune on streets. About The trans handle i have no clue when i was building everything I shipped to ATF for stage3 build. So my trans is made for them. And the engine is fully build piston, rods, APR studs, fully build heads and intake manifold too. Base on my knowledge on Ls yours are 99 check the engine number if says 2UZFE you need to build the bottom end if your looking for high HP or 3UZFE those engine are very weak on rods. I hope you made it i will like to see some videos making some pulls, these cars are very fun
@@marineyacht Thank you For the Info! I will add these items to my parts list. It is a 1UZ-FE so, I'll start off with a mild top end build with added turbos and upgraded fuel system just for starters after I'm done having fun I'll build it for about 600 to the wheels. I can't wait to see your videos as well! Keep up the great work!
I wish you’d post more videos man, create some content with that car
MIKE FERRER totally agree!!
I got a 98 that I’m doing a m112 supercharger build. I really wanted to do TT but that cost way too much money
@@mikeferrer6665 make a video of your 98 ls400💯
@@mikeferrer6665 yeah do videos of your ls400 then 👌
When I heard it turnover I KNEW this car was special.
Well done my man, well freaking done.
Thank you! Stay tuned I have bunch of new stuff for him.
Looks like Franklins house from GTA V
You needs to make a longer video on this beast!!
Full Boost J4 I try my best for the next time👍🏽
That sounds amazing!
What size turbos and what you got for internals. I got an unmolested 91 I'm thinking about twin turboing
heavenly
Thank you brother
Good stuff👍
# Maelo performance fueltech tunner # Manuel Nolin welds # TR mashine shop
That's a beast
Please post more vids, and who did all the work? Like a shop? If so were isnit located at, and who did the wiring for the fueltech
I will try my best to post more videos for sure, 40% of the work was made by my self, with the help of a friend of the machine shop who help me with the valve seats angles and stuff. Other good friend who own a muffler welding shop who help me to build the stainless steel manifold for the TT set up. And the wiring was made by a fuel tech specialist tuner friend of my and my self ,I help a lot. The car is all made in 🇵🇷 Puerto Rico 🇺🇸
Dude, if you put that car on BringATrailer, I know itll bring some big money. Super clean work! Beautiful car.
In total what all that cost?
Hey, I’m interested in buying it if your willing to part with it
How difficult is it to turbo one of these ? How many years or months did it take to build ........ can it be a daily driver ?
Schmitty_Love yes it can be daily driven , for my kind of experience with this project it was not that difficult but inpatients yes a lot. It took me for about 10 month just because I lived in Puerto Rico and the 70% of the parts I ordered to USA and I have to wait for it, including the transmission and the shipping cargo company waited 3 months 😡 but if you are already in the USA area for sure you can build it all in like 3 month. After all it is a good experience.
@@marineyacht can you give me information on the build? What power does it make so far?
How much was this to build? I have a 90 and want to turbo it or twin turbo it is it a complicated build?
fggbjdgd well I have no idea how much I spend, I just bough parts and parts but probably I could say I past the 17k about money you can build your car but it depends of your goals in it. About to build it is not that difficult to build ,to me more difficult was find the part just because for these car there’s not much parts to choose. That makes it difficult. The rest of it is easy bred. I hope
You can find your goal and built it, then send me some videos. 😬👍🏼
#Fueltech Ft500 #ATF transmission
Wrong springs on BOV
Really ? Tell me more, because am confronting some turbo lag and am looking for results. Am about to do a boost leak test.
@@marineyacht I think he means you need like a 12 pound spring or something your bov is almost opening at idle
Test drive video please
Soon
wow looks pretty nutz 600+ range?
Thanks! I am looking for 1,200 no more then that.
Where did you get radiator? After market?
Toyota supra 1997 mk4 mishimoto X line 3 row, all you have to do is cut the nipples on both sides and welded on the original measures radiator suport are on Lexus Ls400, wish is more in the middle. If you are using the top hose original don't fit, you have to find on your local autoparts store one that works. I use -AN on both side weld the fittings and braided hose.
@@marineyacht ok thanks bro💯
Ok I got a lot of questions because I wanna build ls400 twin turbo
Ok shoot some 😄 let me see if I can help 🤔👍🏼
Do you think this is possible for a 97 edition.
Everything is posible, it depends on how much you want to spend on it. Best of luck !
Where did u find the turbo kit i want to buy a ls but cant find anyome to custom fab a kit for me
It’s all custom with my idea and my friend who owns a muffler shop, And on side jobs he mades headers and turbo kits, intercooler piping’s and all.
So what's happening with it?
New set of big brakes are comming, plus new wheels and hood ventilation is all ready done, and more tunning comming soon. Thanks for the support.
I wanna turn my 99 LS400 into a sleeper. Did you have to build the bottom end? And how much HP can the Trans Handle? Cause I was thinking of running Twin Mid Mount T4's and start at 6 to 8lbs of boost. Of course I would top end port and cams. What system are you running and fuel?
Hello, for fuel i have two WALLBRO 425 i think and straight lines braided AN-8 to front split for fuel rail in AN-8 and retuned with AN-6 with a 2,600cc injectors from Bosch. And i don’t have any issues. But if i need to replace i will use one fuel pump from Hellcat those fuel pump are crazy good. About HP i have no idea never ran on rollers i tune on streets. About The trans handle i have no clue when i was building everything I shipped to ATF for stage3 build. So my trans is made for them. And the engine is fully build piston, rods, APR studs, fully build heads and intake manifold too. Base on my knowledge on Ls yours are 99 check the engine number if says 2UZFE you need to build the bottom end if your looking for high HP or 3UZFE those engine are very weak on rods. I hope you made it i will like to see some videos making some pulls, these cars are very fun
Ps: stay tuned new stuff coming soon
@@marineyacht Thank you For the Info! I will add these items to my parts list. It is a 1UZ-FE so, I'll start off with a mild top end build with added turbos and upgraded fuel system just for starters after I'm done having fun I'll build it for about 600 to the wheels. I can't wait to see your videos as well! Keep up the great work!
What is the white brace on top of the diff and what swap bar is that for the rear
Ultra racing strut bars, support, stability of and chassis improvement. I Hightly recommended.
What trans are you running? Also rear diff is it stock?
Beautiful build. I have a 99 I'd love to put some elbow greas into. Thank you for what you have posted. Not many do.🤘🏻🤘🏻
I use ATF transmission stage 3 and rear diff and axle are stuck plus the drive shaft is stock too.
Awesome lexus, do you have IG?
Leopar_130 thank you, sorry for my ignorance but what’s an IG?
@@marineyacht instagram
Which mishimoto rad is that
Mk4 toyota supra 1997
What radiator are you running?
Mk4 supra three X line from mishimoto. All you have to do is change the location nipples where it hangs down.
What year is this ls400?
1990 first gen
Can you show us 0 to 100?
I will love too but is not a drag car, sorry!, meaby some day i will.
@@marineyacht ok
Automatic?
Yes sir. ATF stage 3
Sick
@@marineyacht besides everything else, how much have you put in for the turbo set up alone?
Do you still have ac ?
Yes it has brother. Working in perfect condition. I have not touch the OEM AC or Power Steering system
@@marineyacht damn bro. Good to know, now I know I can boost the 1uz with ac
Its puts the lotion on the skin.