2014 BMW 528i (CAS4+) All Smart Keys Lost using Autel IM608 Pro2
Vložit
- čas přidán 9. 07. 2024
- If this content helped you, you can buy me a coffee or make a donation
You can also become a VIP member on Patreon to access exclusive members-only content, technical information, videos, and procedures
VIP members also unlock access to the VIP Discord chat room where users can get support from myself and a knowledgeable community
www.buymeacoffee.com/joedlock...
/ joedlocksmith
JoeDLocksmith - Automotive Locksmith and Technical Support demonstrating Automotive Key Programming Procedures
These videos are only intended for educational purpose and should not be used for any illegal activities.
UHS Hardware For Locksmith Keys and Supplies
Here's a $15 off coupon for your first order at UHS Hardware. To accept, use my referral link:
i.refs.cc/p6fUJtZs?smile_ref=...
This guy is a pro 🤗🤝
Good job, bro!
Amazing work
Muito instrutivo seu vídeo, obrigado
Exellent😊
thanks
Not all heroes wear capes... But you should definitely wear one Joe
Super , thanks for video , please put a link where you bought the cables , thanks again .
Masha Allah
very pro 👍
hi joe, so you do tech support for autel?
Believe I've spoken to you before. huge help. Thanks so much. Glad I found your channel.
Bad ass Joe thanks !!!
How do you know if you need the isn from dme ahead of starting key programming when akl
Hi joe i have question did you can do it cas 4 + on bench???😊😊
After read ISN. Can im508 leaning by OBD?
Is there link where to buy dme cable for reading isn
For autel - g box????
Would this apply to a 2012 BMW 528i CAS4 system?
Interesting how the programmer wasn't required at any point. All coding was done via the ignition coil.
where and how did you get the cable for DME ???
Is it gbox3 can read isn ?
Que tal.. Desconectaste los cables de la ECU.. Observe el G box.. Cual cable uso.. No vi que estaba conectada.. En la ECU.. Vi la ecu.. Sus cables de cocción de motor.. Me indica... Gracias
hice un cable de cliente
Do you need to get isn first for all bmw in alk ? In order to go odm2 to add the key ?
Yes for most
That 10 digit number is not easy to get on the n55 engines!!! Add labor time !!!
What happens if the information in cas4 is corrupted? Can the original information be recovered? I have really been afraid of programming by obd
🤙🤙🤙
Thanks for your educating video, please how do I check if the car is cas3 or cas4? Thanks
Smart Selection
Are u going to sell them jumper harnesses?
What u charge for something like this?and u can do it if I sent u the ecu
The car's battery was fully charged right?....
Yes
And the one which has a g box installed on the bonnet of its car seems to be eaten by conaction
cosigo fazer com a km 100 e o g box
No
Are you not worried of bricking cas module doing procedure via OBD? Or at least without having cas backed up.
I know autel has repair function but it is a till a worry if it doesn’t work?
Genuine questions, not hating at all.
Yes there is a risk of bricking the CAS module
Brother, the video is good but you did not enter the password that came.
I entered the password from my phone.
Why is the password different? Y. Somewhere else sir. so password