Samsung S24 Ultra Anti Reflective Screen Protector Installation & Review!
Vložit
- čas přidán 1. 02. 2024
- Pick Up your Samsung Anti Reflecting Screen Protector using the links below!
Amazon: amzn.to/3uqO3vC
Follow & Connect With Me!
Twitter: / techkingmike
Instagram: / techkingmike
Business Inquiries:
Info@techkingmike.com
*Links listed are affiliate based, clicking them does provide a monetary kickback to the channel at no extra charge to you! This simply means that clicking a link helps me to continue making quality reviews and content. - Věda a technologie
Been using this screen protector for 3 weeks now, no bubbles when installing and have been traveling alot with no scratches on it yet, and the anti-reflective is great, may 90-95% as effective as the real screen.😊
I’m glad it’s worked out for you!!!
Is it self healing?
@@Bluey656 No, its a hard plastic, it will chip if hit near the edge of the protector.
@@sawood1031 I see, what about scratches? And does it affect the screen quality in your experience?
@@Bluey656 So far so good with the scratches, but I'm also not one to put my phone in the same pocket as my keys so that may help a little, and I see no negative effects on the screen quality, which as Samsung product for a Samsung product is no surprise.
No good, my friend. You failed.🤣🤣🤣
The crease in the center is a thing. You can't push the crease out with the squeegie or anything. Glad it was a free option. Like he said, there are 2 because they know you're going to mess it up the first time. It'll do for. now.
I have never been able to apply one of these film screen protectors without having at least one piece of dust trapped underneath. Next time, I'm going to try applying it outdoors.
The best advice I can give is to take a shower or run a warm shower and then apply the screen portector in your bathroom. Putting one outside is a disaster with all the wind blowing lol
Doubling down on anti glare! What a move by Samsung! May grab one for the S24+ if they make one for it. Solid video 😎
There was a vertical section that you did not use the sticky tape on, which left the dust particle under the protector. And as someone already stated, the bottom portion of the protector was not applied correctly.
Thanks for sharing. Blessings on your day.
At around 07:55 you made a mistake when you tried to stick the bottom side of protector. You pulled the upper side a bit and the air came in. Otherwise I belive it should have been completely bubble free.
Now considering the actual review, it would be actually beneficial for a review of screen protector tthat you explained if touching the screen and sliding the finger is different than without the protector.
Also, a test if the protector scratches from the finger nail, since that one isnt glass but foil as I understand.
Lastly, that protector isnt taking full screen width and leaves a bit space which for some users makes unpleasant feeling when using side gestures or s Pen.
I think those points would complete your review.
Thanks for the video. 👍
I appreciate your input I'll definitely keep that in mind for future coverage! Thanks for watching!
for the bottom part it would have been better to remove the adapter and push down with squeegee and the middle part the lines disappear the next day.
Thank you! I just installed mine 🙏
Solid video, my man
I applied the screenprotector (tempered glass) before installing the phone. Worked just fine and only 1 fingerprint installation 👍
Im using a ZAGG anti reflection Glass protector. Not sure about the "anti reflective" part.... but its a great screen protector. And the finger print scanner works perfectly. Honestly i scanned my finger print after i put the screen protector and increase the touch sensitivity. Works perfectly
Mine too 👍
Is the zagg worth the $40 price tag? It's it really anti glare as well?
They did not include the alcohol wipe deliberately cuz cleaning the original screen with alcohol will diminish the anti glare finishing ,just use water...
I succeeded the second time without bubbles. After 2 weeks I had to change it because it is prone to scratching, I do not recommend it. I used glass from FIXED Armor. This is only a temporary solution.
Does it help the screen look more saturated?
Finally, an experience that is similar to mine. I used the "free" antireflective screen protectors from Samsung and had basically the same results. There was a distinct horizontal line where the two pieces of plastic met and it showed in the film once installed. There were also bubbles galore. I didn't have much luck working the bubbles out to the side and could not get rid of that horizontal line in the middle. I still see it on yours while you were using the bubble remover tool. The horizontal line is a first for me. I have never seen it on any protectors I have installed over the years, both film and tempered glass.
I peeled off the protector and threw the entire package in the trash. I ordered a couple of tempered glass screen protectors from Amazon. The first one had a privacy screen and looked good but I couldn't get my fingerprints to register on them, even after deleting the previous set and trying to re-register them. The second one worked fine but I have to moisten my finger before it registers with the sensor. I'm willing to live with that since I usually unlock my phones with a pin. Tempered glass protectors typically don't work well with Samsung's ultrasonic sensor. I had the Motorola Thinkphone previously and the fingerprint scanner worked flawlessly. Motorola uses an optical scanner, which sees through the tempered glass just fine and the fingerprint sensor on the Thinkphone worked every time. Unfortunately, the optical sensor is apparently less secure but the ultrasonic sensor has trouble sensing through glass.
I am never enthusiastic about the free credits offered by Samsung for pre-ordering the new phones. Most of the stuff from Samsung is just useless to me. I can find much better products elsewhere, even if I have to pay for them. Free just isn't free. They come with frustration and disappointment.
i wonder if this will fit the s23 ultra
I am using tempard glass protector with my S24 Ultra and my fingerprint scanner work just fine. You need to re register fingerprint after application that's it!
You didn't use the squeegee for the lower part of the screen, resulting in some air bubbles in the middle.
What about a liquid screen protector? I heard the regular screen protectors are ruining the anti glare.
I just got the liquid protector wasn't sure about it I'm still doing research
How is it @@camrooon4130
I wouldn't recommend talking while doing screen protector installation, youre just introducing airflow and dust on the phone while installation. Thats why there are some protectors that come with installation box modules where you will pull the plastics while the device is fully enclosed to the box.
What about impact resistance?? Is it better after the screen protector?
Not in my testing. I've actually removed it for the Whitestone dome.
@@TechKingMike for any specific reason we should know?
Thanks!
Zagg has the best screen protector for s24 ultra. It’s expensive but very good.
After doing the top part, you should remove the attachment before doing the bottom part.
Thank you
Most bubbles on screen protectors disappear in about a day, including Samsung's.
My only issue is that the protector is too narrow on sides and when you swipe from left or right,the edges of protector feel very sharp . I tried to lift it up but it broke like tin foil
Exactly my experience
Yep I had same issue, I hated it. So I replaced it with tempered glass instead which is much better though it is a bit more reflective.
@@joesiah841 is the fingerprint working? What brand of glass did you get?
@@joesiah841 a bit more reflective? Dude the screen becomes a mirror with tempered glass ruining the beatiful original anti glare S24 screen...
@@CG-ql5rr yes it should be. It is samsung made.
So, Samsung doesn't make a glass screen protector that works with their fingerprint scanner?
They don't make a glass one period to my knowledge
Im gonna get this one just because its anti reflective.
7:50 why would you do that ?
Especially before you did perfect on top.
I didn't intend to 😭
I put mines on perfect 👍🏾
It works perfect 👌
...perfectLY 😉
Alcohol wipe not given bcos if u rub alcohol over it the screen will lose its anti glare properties
The Flolab came with one.
I order the spigen, its easy to put on
Bendy plastic? I used Flolab glass.
I’ve heard great things about it, I need to pick it up and try it out.
These protector are so thin and doesn't come with solution. So it's very difficult to have a perfect installation without any bubbles.
I appreciate you making this video, but you didn't do it the right way my friend. You pulled the other half of the protector peel to fast and too abrupt, and that's why you got all those bubbles in the middle of your screen. You should have used the card to push the peel off gradually starting from the middle. Instead, you just removed the peel and placed the protector on the screen leaving some air bubbles there. It had nothing to do with dust because there was no dust there. Maybe you should have done some practice first 😊
Really like it on mine but the install was a bit of a pain
As I'm sure the video proves me too lol
I installed 4 of these, 2 on S24 2 on S24 Ultra. All 4 had bubbles, dust and or creases.
4 of them!!! That's insane man I am sorry you had to deal with that!
I had Samsung do it since they are trained for it and it was installed perfectly. Thr good thing is the package has two total so I still have a spare one that I can use if needed.
I put one on my S24 Ultra and the crease disappears the next day. The only problem is it's sharps around the edges.
I succeeded the second time and 100 percent.
The middle bubbles will disappear within 24 hrs on own.. its still not worthy of the price though (2500/- INR is too much for this 😢😢) i wish they give it stock with the phone in future
Couldn’t make it work. Ended up going with Spigen Easy Fit.
.
How has the Spigen been for you?
Mine has a wierd line on the middle
I also had the line but it should go away after several hours
terrible application especially thwe bottom part. should have watched the instruction video.
Any screen protector that you have to touch to put on won't ever work
That line across the middle sucked the excitement right out of me. for $25 this method of applying it on the phone is a L, Samsung. Now I'm really interested to see how Flolab's screen protector installation goes. This one by Samsung screams cheaply made. Like you said, it would be best if they installed it on the screen themselves since their stand alone screen protector turned out like this 😬
I ordered the FloLab it will be here Friday
...the line across the middle goes away after a few hours. Plus, it's really easy to apply... I did mine first time, no problem/bubbles 👍
I've read reviews on this, looks like everything I read was correct. Definitely not worth the money!!
Very odd applicator by Samsung. The bottom of the screen protector needs to be wiped down and dust applicator used before putting onto the tray. Otherwise, the blue screen carries dust and puts it on the screen AFTER you have cleaned the phone screen. I had to use the second screen immediately after the first. Not intuitive and not nearly as good as “Z” screen protectors. Thanks for the video as it was very useful with such an odd installation method.
Samsung dont make screen protectors on new phones?
No unfortunately they do not include them anymore
@@TechKingMike ohh , wow..
I purchased this in India..and faced the same problem as the video.
Money wasted.🤕
This screen protector is not very anti reflective
Its crap. I use Flolab glass.
lol you ruin it 😂😂
Not good.
😂😂😂😂😂😂😂😂
This screen protector is a garbage. Just buy spigen glass or use only with case.