Series vs. Parallel Effects (Axe FX 3, FM9, FM3)
Vložit
- čas přidán 12. 09. 2024
- Grab my Fractal Favorite Amps and Cabs Guide...
www.mathewdale....
Check out my Fractal templates and preset packs...
www.mathewdale...
Here's a great tip for your Axe FX or other Fractal unit.
This video takes a look at how to route series effects or parallel effects in their best possible ways in the Fractal ecosystem. I also discuss the benefits of running delays and reverbs in parallel for added clarity and control. Use these great tips on your search for THE TONE!
#MathewDale #Fractal #AxeFX3 #FM9 #FM3 #series #parallel #Guitar #Tone
THE SOCIALS...
/ mathewcdale
/ mathewdale Mat's Trusted Gear...
----------------------------------------
GUITARS
PRS DGT sweetwater.sjv...
PRS McCarty 594 sweetwater.sjv...
Strandberg Fusion NX sweetwater.sjv...
Strandberg Original NX sweetwater.sjv...
----------------------------------------
GUITAR GEAR
Line6 HX Stomp sweetwater.sjv...
Shure GLXD Guitar Wireless sweetwater.sjv...
Mono Electric Guitar Gig Bag sweetwater.sjv...
Mono Acoustic Guitar Gig Bag sweetwater.sjv...
Electric Strings sweetwater.sjv...
Acoustic Strings sweetwater.sjv...
Music Nomad Set up Kit sweetwater.sjv...
Fred Kelly Bumblebee Jazz Picks amzn.to/41sE5Eq
----------------------------------------
STUDIO GEAR
Studiolive 32C sweetwater.sjv...
StudioLive 32R sweetwater.sjv...
Eris E5 sweetwater.sjv...
Rode PodMic sweetwater.sjv...
QSC K10.2 sweetwater.sjv...
QSC K12.2 sweetwater.sjv...
Behringer P1 Personal Monitor Amp sweetwater.sjv...
Presonus HP4 Headphone Amp sweetwater.sjv...
Studio One+ sweetwater.sjv...
So well and clearly explained! Thanks for going to all the effort mate!
Thank you Mathew! I’m new to the fractal world with a FM3. This video is exactly what i was looking for. I wanted my delays and reverbs to be in the background but didn’t know how until now. Thank you
You are terribly good at these tutorials man. I've been running an AXEFX since the AxeFx2 and I'm learning stuff from your vids.
Thanks so much!
Great video. I always have been a tube an board player, very particular on my tone. I went for the Helix and just couldn't get to enjoy the tones out of that. Now in week 3 with my FM9 and 2 full shows, I'm just about there in total satisfaction. Fractal is legit, and your video just answered one of my issues based in effect trails and none. Thanks! Keep em coming.
Glad the video was helpful! Thanks for watching. Similar boat for me. Always tube amps and analog pedals until I needed a direct solution. Now just about every gig is a Fractal gig for me!
Extremely clear explanations, thanks!
Thanks for watching!
Thank you, I love your videos about the Axe FX 3, FM9 and FM3. There's also another difference between the two in your example: because you put each effect on a separate path, the delay and reverb are added to just the dry guitar tone signal, but in series the reverb is added to the guitar tone + the delay. If both blocks were on the same separate signal in parallel, one effect would also affect the other one (like in the series example).
True. I've run effects like that before, but I really like the separation using multiple independent paths. Makes the delay and reverb a lot more articulate.
I thought you had an oddly placed doorknob and just now realized it's your hee-hive 😂
This was super helpful. Especially the bypass explanation
I wondered why my volume got doubled running two delays in parallel. Now I know. Thanks!
that's a good advise, i also like to use parallel for delay and reverb.
Just wanted to say thanks for all your axe videos they are super helpful. I feel lucky to have a FM9 and there is so much to learn I have just scratched the surface! I also play bass, some content for those of us doubling on bass would be awesome 😎
Thanks so much for watching! Bass videos are a great idea! I’ll see what I can cook up.
Excellent explanation.
I use parallel FX a lot…The Mute in trick is great..I didn’t know it would do that…amazing piece of gear..
State of the art! Has me selling off a lot of tube amps. Incredible piece for sure. Thanks for watching and commenting!
@@mathew_dale I love mine….but not quite enough to get rid of my tube amps…I like using them together..
For sure! I’m still going to hang on to my 74 deluxe reverb!
Awesome video! Thank you!
Awesome! Thanks for the good content man! Learned a bit here!
Awesome, thank you!
So we'll explained buddy. Cheers.
Thanks man ! That's very cool !
You bet!
great, will try it)
Excellent video.
Thanks for watching!
again ,a real good video thanks
Thanks for watching!
Good stuff
Did you ever try running 2 amps??. in series, alot of people do parallel. Kind of love to see what happens if amps are stacked??.
I’ve done the parallel both for left and right and blended mono rigs but haven’t tried stacked series. If you did, it would mostly be using one of the amp blocks as a type of drive block. So I’d try a cleanish amp as always on and a dirty amp to drive the clean. Might come up with some cool tones.
Great video. Clear and helpful. Have you done videos, or know of, any that explain the basic set up the FM9 pedalboard using the AXE Edit?
Thanks for watching! For specific FM9 videos, check out Leon Todd and Rosh Roslin. Also, be aware that the FM9 has its own editor “FM9-Edit” so it will not work with “Axe-Edit.” Good news is that the FM3, FM9, and Axe-FX iii are all based around the same architecture so most video how-to’s will work for all save for a few blocks like the vocoder, RTA, and tone match. The FM9 has everting the FM3 has plus more, and the Axe has everything the FM9 has plus more. Happy tone building!
Great video! Dude.. I'm selecting the ping pong delay in my presets, however it sounds with a stereo feel but not that thumping feeling from one side to the other. Do you have any idea what I could be doing wrong? I'm listening from a stereo headphones directly to the fm3's headphone output.
Cheers!
Are you on the Fractal Forum? If you are you can message me at M.C.D. and send me the preset and I'll take a look.
Great tips! Thanks so munch!🤘🤘☠☠
Thanks for watching!
Thanks, saved this to a Playlist because I always forget how this works. Running in Parallel why would someone use Input Gain to control the level instead of Level? I've seen it done both ways and the difference has never been obvious.
Thanks for watching and glad it was helpful! You could think of it like an FX send and return on a mixing console. Send (input gain) being how much signal is going in to the effect and return (level) how much going out. Different strokes, but I prefer to use the level control.
Loved the video and the explanation, I’d like to know if you can explain the best practices to cut the low end for clean tones, I am trying to record videos for CZcams but there’s always an annoying low cut around my tones.
*low end around…
Sure thing! Most low end sculpting I do with the Cab preamp set to at least 80hz. I’ll also use a parametric eq after the amp and cab set to blocking and 24db/octave and around 100hz or so. I talk a bit about that in this video I’ll link below, but I’ll also add a more detailed explanation video to my list. Thanks for watching!
I Can't Gig Without Perform Pages (Axe-FX 3, FM9, FM3)
czcams.com/video/wiUTxcrGIV4/video.html
@@mathew_dale I might missed that, thank you!!
Realise this is a year after the vid was made but do you know if there is any difference between the series and parallel options on CPU performance?
No difference with the blocks themselves but routing FX in parallel will use slightly more CPU due to the extra shunts used in the connections. Not much though.
Hey Matthew, if I wanted to send the Parallel FX out a different output would I create output block 2 for instance, then run a cable from the FX to output 2 ? What I want to do is record the FX separately from the Amp/Cab in my Daw. Thanks.
Sure thing! Are you running into an interface or usb from the fractal into your computer?
@@mathew_dale I'm using the Apollo Twin MKII.
The grid layout would actually look the same either way. Yes- run shunts from the FX you want in separate channels to the output 2 block and DON’T run them back to the dry signal going to output 1. Same parallel settings. If using an interface, hook up to 2 channels right and left and create tracks in you daw selecting those inputs. If using usb, output 2 block is hardwired to input 3&4 selected in your daw. Make sure you pan the fx tracts hard left and right in your daw for that stereo goodness!
@@mathew_dale Thanks so much, Mathew.
Gotcha (just saw the reply). It will be tricky to run the FX in stereo with the Apollo. Since there are 2 line level inputs on the back (I’m assuming that’s where the fractal is plugged in via xlr) you would need to do a mono line from output 1 to input 2 on the Apollo then mono from output 2 to input 2.
Hi Mathew. The Chorus on my Fm3 does not have mute in bypass mode. Is it normal?
Yes, that’s how the chorus block is. Use “Mute Out” for parallel chorus. There’s no “trails” to worry about with chorus so simply muting the output of the block will yield the results we want in parallel routing.
@@mathew_dale thank you!