Woodturning: Punky Flame Boxelder - Shear Scraping for the Best Finish
Vložit
- čas přidán 22. 08. 2024
- Woodturning: Punky Flame Boxelder - Shear Scraping for the Best Finish
I started this project right before I had shoulder surgery, like the night before I had surgery 🤣
I have a bunch of this flame boxelder - it was a little punky to start with and it is only getting punkier. I used the shear scraping technique to help get rid of the tear out and finished the piece about 6 weeks after I’d started it. I talk about shear scraping and recommend the following videos by the pros for the exact definition and proper technique:
Lyle Jamieson
• Lyle on Sheer Scraping...
Reed Gray aka RoboHippy
• SHEAR SCRAPING by Reed...
I finished the piece with General Finishes Arm-R-Seal Gloss and it’s not my favorite - it took 3 coats of the finish plus Brad’s Sanding Paste and buffing with the Beall Tripoli and White Diamond wheels to get it to a point I was satisfied. Using Brad’s Tung Wax or Tung Honey is much faster, looks just as good, and is food safe so I’ll likely not use the GF again.
DISCLAIMER: My videos are not meant to be instructional videos. I am still learning and am in no way trying to present a teaching video - my channel is classified as Entertainment. Do I hope you get something useful? Sure! Do I think you can learn from my successes, failures, and mistakes? Yep!
However, you are responsible for your own safety! Wearing long sleeves, gloves, or jewelry around machinery is not recommended and can be dangerous!
Ways you can help support me and keep videos coming:
Subscribe, Like, Comment, Share 😊
PayPal Tip Jar:
www.paypal.com....
Become a Patron:
/ lisaramlow
Some of these links are affiliate links, which means if you use them to make purchases, I may earn a small commission from that company. This doesn’t cost you anything and is a great way to help support my channel and keep videos coming.
Starbond Adhesives:
Promo Code LISA10
www.starbond.c...
Promo Code RAMLOW10
www.etsy.com/s...
www.triedandtr...
bealltool.com/...
Thats a gorgeous vase!! I love all the natural coloring, Mother Nature sure knows how to use her paint brush well!❤
Thank you! I do love the natural look as well
Glad you are on the mend. Boxelder can be so cool to turn. The red flame will fade away with time, but while it is around it is stunning.
Hi Chris! Yeah it's a bummer the color doesn't last forever but it does still add some cool dimension even once it's faded. 👍
That's a lovely vessel, Lisa. It displays the beautiful figure in the wood superbly. 👍
Thank you Noah, I appreciate it 😁
Hi, Lisa. Hi, Bailey.
It's great to see your work again!
Hi Crystal 😃
That's Beautiful Ms. Lisa
Thank you Charity! 😃
This piece is looking very good. Hope your surgery turns out good.
Thanks Randy, surgery was good and I'm well into recovery and PT 👍
Can't remember if I tell the story in my video on shear scraping or not, but I will never get tired of telling it. Lyle always spells it Sheer cut while most of the rest of us spell it Shear. We were down in Phoenix at the symposium some years back and he was in the booth across from me, and we got to chat a bunch during classes when there were no people wandering through. So, I asked Lyle, about it. Lyle, by sheer, do you mean like the nighty you want the Missus to wear???? I got the mother of all eye rolls from him.... No, No, No, like the sheer face of a cliff..... The shavings are very sheer/shear, either way you spell it. For sure, the burnished burr is the best and sharpest cutting edge you can get.
Hope your shoulder is doing great! I had hoped to make the Symposium in Portland since it is just down the road from me, but I will be taking a cross country road trip to Maine. My best friend is going to be a grandma and her daughter lives in Maine. Never been there before.. Maybe I will be up in St. Paul next year.
A new thing in the flat work world are ceramic top cotes. I did post about it on the AAW site. Interesting stuff. I did try that Rubio Monocote, and put 2 coats on a piece, and really liked it. May have to try the ceramic stuff too....
Hey Reed! You did tell the story in your video but it's a good one and bears repeating. I debated on spelling it sheer/shear but ultimately opted for shear since it's more commonly used. Both make sense to me and the end result is the same so I don't suppose it matters much.
Shoulder is good. I mean the surgeon and PT are happy and say I'm making great progress but as usual I'm expecting too much too fast. I'm reading for it to stop hurting, though the pain is low it's been contestant since the surgery in November and it's starting to grind on me. But I knew it was a long recovery and I just couldn't put it off any further so imma keep pushing thru PT and working to get the strength and range of motion back. It's hard though because I've been protecting that joint for 20 years, trying to keep it from moving in a way that allowed it to dislocate, and that is burned into my subconscious somewhere so I'm fighting that too 🤣
Still trying to plan a trip to the PNW but won't be this year. Never been to Maine either, also on the bucket list. Enjoy your trip! 😃
A huge part of my recovery from hip and knee replacement was adjusting to being able to walk upright again... Old compensating habits. Told my surgeon that he needed the clip from the old Ringo Starr Cave Man movie where they start to walk upright......
Great job Lisa. So glad to see you are back. Hope the surgery went well and wasn't too painful a recovery. Look forward to more videos. Take care. Thanks also for the George Bailey clip. Cute as always.
Hi Bruce! Shoulder's doing great, just waaay slower than I'd hoped. Surgeon is very happy with progress but warns me it'll probably be 6 months before it's actually healed and I have the strength and mobility back 😖
Lovely vase Lisa, box elder has such lovely colors and your finish really brought that out, well done and thanks!
Cheers Al
Thank you Al, lovely to see you as always! 😁
Beautiful Lisa.
Thanks Jack!
That is a great and imposing piece Lisa. Not in any bad way, it just looks like it is exactly what it should be. I hope you're healing well!
Thanks Jay! I'm doing well and the surgeon and PT are happy 👍
Hi Lisa great video the flame boxelder looks really nice its grain is nice and colour is amazing. What a magnificent and unique vase I really love it. Take care lisa and bailey. Amanda xx
Thank you Amanda, nice to hear from you 😃
Hey! Beagle Stink is perfume! Lovely piece; thanks for sharing.
Well that's certainly what he thinks! 🤣
Hello Lisa. Love the vase 🏺 color and Finish. I hope the Road to recovery is Going Well ,hope you listen to those Doc & Therapists. Also hope the ice treatment helps too. Lisa you Two Take Care be Safe enjoy the Messages ,and ask for them a lot to help in the Healing. I know how you Feel because I had two shoulder surgeries. Well enough of me Chatting. Peace Be With you Two? 🌹🌹😘
Thanks Greg!
Awesome job on that one. I love all the character in the wood.
Thanks Dale!
Glad your surgery went well. I am looking into getting the same thing done. Sure is fun getting old. LOL
I've been putting this off for 20 years but figured it isn't gonna get any easier the older I get (and it started dislocating more frequently) so I decided it was time. It's a ridiculously long recovery and I know I'm expecting too much too fast so I'm trying to be patient, but I'm ready for it to be better now! 🤣
Great looking piece! Hope you're feeling well. Bailey is still adorable 😊❤
Thanks Andrea, I'm hanging in there! And Bailey sez he is glad his handsomeness is not wasted 🐾😁
Thanks for discussing use of a shear scraper -- I've been working on learning this. (Also, thanks for the links to the "experts" on it!) Be well!
Glad it was helpful, and definitely check out the video links for the proper words etc 🤣
Yay Lisa !!! I love seeing your video pop up and I love this punky boxelder vase! ❤
Thanks Shannon, I appreciate it 😁
Beautiful Lisa! Hope you’re doing well and thanks for sharing! ✌️❤️🍻🖖
Thanks Jack! I'm doing well, surgeon and PT are happy so I guess I'm on track. 😃
That is very cool. Great job!
Thanks Tim!
Nice vase Lisa. Hope your recovery is going well. Stuart
Hey Stuart! You changed your handle, I almost didn't recognize you 😁. Shoulder is doing well - I am (as usual) expecting too much too fast but the surgeon and PT are pleased so I guess I'll try and chill out. I mean I knew the recovery time could be 9 months (which is the biggest reason I really didn't want to do it) but that seems much longer when you're actually it in 🤣
@@LisaRamlow yes, changed my channel name to something I thought would be easier for people to remember. Don’t overdo your recovery! I can see you pushing too hard too fast and then messing up what just got fixed. 😂
Nice piece! Happy you’re back!! Hope you’re feeling well.
Thanks Victor! I'm doing well, the surgeon and PT are both happy 😃
Very nice vase, great finish.
Thanks Harry!
Well. ya did that pretty good facing the next day's challenge and all. ... Buffed it out like a strong 2 armed turner I'd say ! ( all is still well ?) Thanks for sharing. Take care. -Mike
Hi Mike! Making good progress with PT, though not as quickly as I'd like to see. I am (as usual) expecting too much too fast. Surgeon is very happy but says it'll likely be 6 months until I get the strength and mobility back. So imma keep doing my PT and try to be patient 😜
@@LisaRamlow A patient patient eh !
Some lovely colour in the wood there!
It's done good stuff, isn't it? 😃
Good tips and approach to box elder. Thanks for sharing.
Thanks, glad you enjoyed it 😁
Very nice workmanship
Thank you Edward 😁
Great piece Lisa! 😎
Hey Leo, thanks so much!
Great looking vase. You done good.
Thanks Doug! 😁
Gorgeous work
Thank you! Cheers!
Nicely done.
Thank you Josephine! Cheers!
Nice job, that looks great. Like the wood
Thanks Vern, I think it was worth the effort in the end 😁
Very nice
Thanks Mike!
Hi Lisa, great project.
I would like to better understand how you strengthen or otherwise build up the wood fibre in a punky piece. I have some Elm that needs this from my parents grave and I’ll only get one shot at it.
Hi Gerry! You can use shellac and it will help stiffen the fibers some. Thin CA glue will work on smaller areas but does stain so be aware. I used Minwax Wood Hardener on a piece of super, super soft beech - next video so in line!