Nokia 6 Teardown Repair Guide - Fixez.com
Vložit
- čas přidán 7. 09. 2024
- Nokia 6 Repair Parts: bit.ly/2x3nsC9
DIY Nokia 6 Repair Tools: bit.ly/2lzLIop
www.fixez.com presents the official Nokia 6 Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a cracked Nokia 6 display assembly, swap a battery, and also how to completely teardown and reassemble your Nokia smartphone. Visit Fixez.com for all of the DIY Nokia 6 replacement screens, parts and tools you need to quickly, and affordably, fix your device!
If you need your 2017 Nokia 6 smartphone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your Samsung device for you. They are available Monday to Friday, 9am to 5pm PST.
Subscribe to our CZcams Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
Nokia 6 Teardown Repair Guide Steps:
Step 1
• Power down your Nokia 6 smartphone.
Step 2
• Eject the SIM card and microSD card tray.
Step 3 (Nokia 6 Display Assembly)
• The 5.5-inch Nokia 6 display assembly is glued on solidly. Apply heat to soften the adhesive.
• Use the precision knife to create enough space to insert a playing card.
• With the playing card slice through the adhesive and carefully decouple the Nokia 6 screen from the phone.
• The display assembly is still connected to the Nokia phone, so don’t try to remove it entirely just yet.
• Remove the following Phillips screws securing the bracket that covers the display cable.
• With the bracket out of the way, detach the cable from motherboard and free the Nokia 6 display assembly.
Step 4 (Nokia 6 Home Button with Fingerprint Scanner and Cables for the Bottom Buttons)
• Disconnect the battery from the motherboard.
• Remove the following Phillips screw and small bracket.
• Peel up the assembly that includes the capacitive home button with fingerprint scanner and the cables for the bottom buttons.
Step 5 (Nokia 6 Metal Midframe)
• Remove the following 18 Phillips screws. The screws are different sizes so be sure to keep them organized.
• Extricate the metal Nokia 6 midframe.
Step 6 (Nokia 6 Battery)
• The battery is adhered to the back of the metal frame. Locate the two peel-to-remove adhesive tabs on the side of the Nokia 6 battery. Grab the first tab and try to keep the adhesive strip flat and wide.
• Slowly and gently pull each strip up and away from the metal frame. The strips will stretch to many times the length of the battery- keep pulling until they come out from between the battery and the frame.
• And just like that, the 3.84-volt, 3000 milliampere-hour (mAh) Nokia 6 battery is free.
Step 7 (Nokia 6 Motherboard)
• Remove the metal bracket and detach the Nokia 6 power and volume buttons cable, 3.5mm headphone jack cable, and signal cable from the motherboard.
• Remove the following 6 Phillips screws.
• Use the spudger to detach the connector on the underside of the motherboard and then carefully lift it out of the rear case.
Step 8 (Nokia 6 Rear-Facing Camera and Front-Facing Camera)
• Disconnect the 16-megapixel Nokia 6 rear-facing camera from the motherboard.
• Remove the 8-megapixel Nokia 6 front-facing “selfie” camera.
Step 9 (Nokia 6 Micro-USB Port and Primary Microphone)
• Use the tweezers to disconnect the signal cable.
• Remove the following 4 Phillips screws.
• With the spudger in hand, pry up the daughterboard. It includes the micros-USB port and primary microphone.
Step 10 (Nokia 6 Loudspeaker and Vibrator)
• Extract the Nokia 6 loudspeaker.
• Pluck out the spring-contact-connected vibrator.
* To reassemble your device, follow the steps in reverse orde
Much better than the other mobile phone
Thanks for the detailed video, it's really helpful. can you please suggest good-quality tools required to repair a device?
Repair ability is very impressive on this phone
Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com
Cannot we replace only digitalizer???do we have to replace display too.....
Any change you could make a similar video for Nokia 8?
thank You for tutorial.ok
Has very comfortable hardware!
Great video, explained in detail,thank You
Glad it was helpful!
Good information
È fatto veramente Bene. Complimenti alla Nokia 😉
There is a crack on my screen but screen and touch working fine. Do i need to change whole screen or any other option to change the glass?
Thank you. It was very clearly explained and great camera job. It would cost 80€ here in Finland to change chargin port. Now i will try by my self and gonna change battery too.
Dear sir .my Nokia 6 sim broken inside .how to remove and how much incharge
thankssssssssssssssssssssssssssssssss good job
Hello bhai mera nokia 6 mobile hai os pa new panell lagana ka bawajod bhi on ni ho raha why plzz reply 😿
Keep it up bro
GOOD WORK
GSM FRIENDs helo
Fine
Can any 1 tell me how he got the glue back on screen
Double sided adhesive is what you want to use to reattach the display.
Fixez.com where did you buy it?
You can use b7000
Supar br0
thank You :)
Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com
pls sir my nokia 2 ta-1029 no sevice solutoin pls
Service issues would be better answered by your current Service Provider. (:
I think your antenne will get over try to go shop and repair it now
Fixez.com this NOKIA 6 is MADE IN INDIA OR CHINA ?
all nokia sold in India is made in India. As foxconn India is setting up production for IPhones too, not sure if made in India Nokias will be available globally or not. Well, you don't need to worry about fakes if made in India.
Indian
howmuch is the heating level
Navas Kandanakam zero just on charging it heats that to for 30 mins later automatically cools down...
Navas Kanda
nakam Rajini hits super star Rajini hits
so hot dont buy it , pubg its runs hot and start lagging
@@abdulkareem4160 it's not cool down automatically .. for me it's heating when I put charge and take photo with brightness etc will u plz say anything for solutions
Once opened the adhesive won't be able to hold the phone together for long time. old is gold.
Once you open the device for repair, we would recommend reapplying adhesive to avoid this issue. Thank you for watching!
Kindly make a video on "How to apply adhesive and which types of adhesive to be used" do name some good brands as well that could be bought from amazon aliexpress etc.
Fixez.com do you use double sided tape? if so whats the thickness.
Really? Hope you don't kill me for my comments.
Good
আর নাই
Traducere in romana
Don't,good
nikhil sahani urbk