Reversible Drum Vac from EXAIR
Vložit
- čas přidán 9. 01. 2012
- EXAIR's compressed air operated Reversible Drum Vac™ System attaches quickly to any closed head 30, 55, or 110 gallon drum. Its high powered vacuum fills a 55 gallon drum in less than two minutes and, then, with the turn of a knob, the same stainless steel pump can empty that drum.
Have a question about this product? Contact us at techelp@exair.com - we'll be happy to help!
WEBSITE: exair.co/drum-vac
BLOG: blog.exair.com
TWITTER: / exair
FACEBOOK: / exair
#reversibledrumvac #exair - Věda a technologie
My 4 year old watched this video on his tablet and told me that this is the kind of vacuum he wants to have in his house haha! And he made me watch the whole video haha 😂
@iso plastic, The Reversible Drum Vac product line is not recommended for use with any material which has a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline, or kerosene. If you would like to discuss this further, feel free to contact an Application Engineer at 1-800-903-9247. Thanks for the question and have a great day!
Hi sir
Is that can working with solvent like isobutanol
What size compressed air line are you using? How much air pressure and or CFM does this unit require?
@JoyFilters, For this video we were utilizing a 3/8" I.D. compressed air hose. The operating pressure for the Reversible Drum Vac is 80 psig inlet pressure. When operating at 80 psig the unit will utilize 19 SCFM to fill and or empty the drum. If you would like to know more, feel free to call an Application Engineer at 1-800-903-9247. Thanks for the questions!
can you make it filter the waste cement paste water when we wash off by water jet after installation
of fresh concrete on the sub concrete and laste spray surface retarder.
We need vacuuming machine and filter paste water simaltaneously.
CEMENT PASTE WITH RUNNING WATER BY WATER JET WASHING OUT AFTER THE EXPOSED AGGREGATE CONCRETE FINISH.
Please, advised with me and inform your professional idea bout my situation.
Awaiting reply.
This has not been tested on the Chip Trapper systems. As long as the system is flushed and cleaned quickly and the residual concrete is not allowed to set up inside of the valve or filter bag it should filter the solids just fine. The vacuum will not suck up only dust. The solids would need to be suspended in the water and vacuumed up from there. If you would like to discuss further, please feel free to contact us at 1-800-903-9247. Thank you for the question!
could this used to fill and empty a water tank im my 4wd. i have an onboard commpressor system
@Samuelmdouglas, Sorry for the delay in our response. The compressor system on your 4WD is probably going to be a little undersized to operate a Reversible Drum Vac. The RDV consumes 19 SCFM @ 80 psig of inlet pressure. Also, it would need to be used on a steel drum or tank. If you would like to discuss further, please call or e mail. 1-800-903-9247 or Techelp@EXAIR.com
Thanks for the question and try to stay shiny side up in the 4WD.
will this pump transfer used motor oil from one drum to another , I tried and it only moved about 1/3 of barrel then stopped ..
+Ron Nichols, The Reversible Drum Vac should handle most motor oils just fine. For thicker heavier weights we do offer a High Lift Reversible Drum Vac. There are several other variables that go into whether the Reversible Drum Vac will operate properly. Please contact us at 1-800-903-9247 and ask for an Application Engineer, we would greatly appreciate the opportunity to trouble shoot this application with you. We look forward to your call!
Are these standard 1 1/2" vacuum hose?
@JoyFilters, The Reversible Drum Vac family all operate off a 1 1/2" I.D. vacuum / discharge hose. This pushes on to a barbed fitting which is part of the quick disconnect. If you would like more information, feel free to contact us at 1-800-903-9247.