HOW TO Safely Run Aftermarket Blow-Off Valve on Honda Civic Type-R [FK8 | FL5 | Integra Type-S DE5]
Vložit
- čas přidán 30. 06. 2024
- The myth that aftermarket blow off valves are bad for your car is debunked in the video.
I'm going to show you how to run a recirculation kit for the HKS SQV4 Blow-Off Valve for 10th Gen Honda Civic Type-R (Also works for 11th Gen FL5 and most likely Integra Type-S DE5).
You could install this recirculation hose fitting onto any car's intake coupler to run an aftermarket BOV in your car that requires a recirculating system.
I've had zero issues for a year and my tuner (that hates aftermarket BOV's) tuned the car with the BOV + Recirculation Kit on and had zero issues with the datalogs.
PARTS -
HKS SUPER SQV4 FK8 BOV (SILVER) Part: 71008-AH009
Buy Here - bit.ly/3SwTTFc
HKS SUPER SQV4 FK8 BOV BLACK EDITION Part:71008-KH009B
Buy Here - www.kamispeed.com/products/hk...
HKS SQV4 BOV Recirculation Fitting 19mm Part:71002-AK003
Buy Here - bit.ly/49rj9Tu
Intake Coupler Port Kit (19mm for 10th Gen Civics) -
www.ebay.com/itm/255311482732...
LIKE & SUBSCRIBE!
SUPPORT ME BY PURCHASING MERCH HERE -
kodawari-shop.myshopify.com
OR BY USING ONE OF MY AFFILIATE LINKS -
Blackhawk Japan for JDM parts -
www.blackhawkjapan.com/?rfsn=...
BlackVue Dash Camera
Promo code KODAWARI.FK8 for 10% off
blackvue.com/
Antigravity Lithium Car Battery
Promo code KODAWARI for 10% off
antigravitybatteries.com/prod...
GiRAFFE TOOLS Pressure Washers
Promo code CHRISYI for 10% off
shrsl.com/2cn63-2cq4-11qcq
RaceBox Pro Lap Timer | Drag Meter
Promo code KODAWARI15 for 15% off
www.racebox.pro/store/
Paragon Brakes Affiliate Link -
paragonbrakes.com/?rfsn=72126...
Spoon Kevlar Intake Duct -
bit.ly/3nQpGnc
Spoon Turbo -
bit.ly/3cMPLPe
Spoon Engine & Transmission Mount Set
bit.ly/3Emn9pR
Spoon Rigid Collars (Front) -
bit.ly/3rJ5x5b
Spoon Rigid Collars (Rear) -
bit.ly/3S793Rg
SEEKER Steering wheel -
bit.ly/3YlrLUR
Cusco Front Stabilizer Bar (Sway)
bit.ly/46tNA9v
Cusco Rear Stabilizer Bar (Sway)
bit.ly/46T8X4b
Cusco Front Power Brace -
bit.ly/3S1YUWk
Cusco Center Power Brace -
bit.ly/3ZYsFsW
Cusco Rear Power Brace -
bit.ly/46AOMrR
Gauges -
Control Unit - bit.ly/3D3HwJe
Oil Pressure - bit.ly/3QoP0cJ
Oil Temperature - bit.ly/3cOTrjt
Boost - bit.ly/3DbEXEK
Water Temperature - bit.ly/3BjRYeh
Seeker Gauge Pods -
Type A - bit.ly/3cZghoi
Type B - bit.ly/3RLU6kt
Type C - bit.ly/3RlFYON
Type D - bit.ly/3QiVNod
Type E - bit.ly/3cQx1OJ
Type F - bit.ly/3cSgOIN
Works Bell Rapfix Short Boss Hub for Honda Civic Type-R FK8
bit.ly/3SbNY8q
GReddy Steering Wheel Lock
bit.ly/3lAXc06
Project Mu Big Brake Kit -
bit.ly/3ZO2Qem
---------------------------------------
00:00 NO GATEKEEPING
00:11 BOV PORT?!?!
00:20 BOV BAD DEBUNKED
00:33 HOW THOUGH?!?!
01:23 DIY Port
01:48 My Guinea Pig Way
02:15 Better Way
02:27 Install
03:46 HKS BOV STUTUTUTUTU - Auta a dopravní prostředky
vid many have been waiting for!
This is sick man! You made a lot of people happy. I’m winding what gauges you have there. I’ve been looking to add a boost and oil temp gauge to my hatch but wasn’t really sure where to start. Great video. Cheer!
Oil temp and oil pressure for the track and then for fun I put a boost gauge
Just found your video for them. Appreciate!
And I'm one of them happy for days, this guy sure does know what his talking about! Ordered mine 3 weeks ago still waiting 😢
Thanks for this explanation, it's been the pivotal factor in helping me decide to get the HKS SSQV4 BOV for my FK8 also. I have a similar silicon suction hose so will be following this procedure exactly to run recirc. Does the turbo itself matter? I assumed not but wanted to check: I'll be running a P700.
I love that Type R Trunk Mat
Sounds amazing
Thanks for this! The hose is 19mm?
Thanks bro🔥
We've been contemplating about this for a while, then got sold after seeing your fb post on fk8 page. We just ordered 2 of these kits last night, 1 is for my buddy's fk8, and another is for my 2.0 6mt accord.
Did the kit work for the accord? I want to do this but I’m not sure if the charge pipe will fit.
Ayeeeee bro hook it up with that accord info pleaseee
Update? How’s it running on your fk8? Any issues?
@Blake_Drago over a year and zero issues
@@Kodawari.FK8stock tune? Or did you need to get retuned to run the recirculating kit?
Very nice.
Solid video! Whose your tuner if you don't mind?
Derek Robinson at IMW
Great video man! I’ve been contemplating getting the HKS Bov kit for my type r but just wasn’t sure if it would cause issues. So basically you did the same thing instead of purchasing the HKS kit with the aluminum pipe?
I bought the hks bov kit with the pipe but you also need to purchase a separate recirculation kit which changes the bov's fitting to connect a hose to recirculate air back into the intake coupler hose.
Have you had any issues running this setup with the recirc? Any rich or lean spikes?
I don’t get it? Where does the long pipe goes attached to the?
Any issues or check engine lights? How long have you had it on ?
Nope. Like 2+ years? Check my first bov video that's when I installed it
man i need to do this to fit the intake zzz i tryed stretching hks coupler but wouldn't budge. legend
Is it possible to do this for the “Si” ? Ty in advance.
If there's a will, there's a way. You'd just need to follow my guide but also make a port on your charge pipe by the throttle body if the fk8 one doesn't fit.
Let me know if you did it I’m also thinking about doing this.
It looks like they have a kit for the 1.5T, contemplating getting one myself. What I don’t understand is how it works with the factory BPV, are you supposed to install a block off plate or do you just disconnect the vacuum line and use it for this instead?
Would the recirc kit work with any full intake?
I would assume so..like 10th/11th Gen type-r, si, accord, etc
will same/similar stututu sounds achievable on an si?
Only if you run high boost. Even fk8 don't do it as loud as mine unless they push 30+ psi
I wonder if this would fit my fl5 I want it so bad now😂
It's gonna poke a lot. Would need a looooot of camber lol
@@Kodawari.FK8 interesting someone with the civic forum said it fit fine.
Would it sound different on a stock turbo car?
Yes, just not as loud as mine. You'll hear a stututu whereas mine goes STUTUTU
i mimicked this with the prl 700 upgraded turbo on my fl5 and i am still lacking the stutter. @@Kodawari.FK8 did you block off the factory blowoff
@@Kodawari.FK8yoooooo 😂 that’s funny as fuck 💀
will it work on stock fk8 turbo?
Yes
Do you know of anyone that did this in the FL5?
Yes. Helped my friend @simply_clean did his FL5
@@Kodawari.FK8 Great! and it seems like only the silver one is in stock rn. It's just the color difference right?
Yea only a difference in color
@@Kodawari.FK8 Thanks! I'll hopefully share some vids/clips and your video when I get to it!
just placed the order for the recirculation valve because of this video🫡 did you have it tuned for the bov?
No need to tune when you have it setup to recirculate. It's basically same as oem but with the crazier sounds
This is the answer I was looking for ! 😅
Would the recirc kit work with any full intake?
It should. As long as you get a bung welded on charge pipe and then install the hose port on the intake coupler