(Detailed How To) Dodge Charger Digital Sound Processor (DSP) Installation
Vložit
- čas přidán 7. 09. 2024
- If you like the contents of this video/channel, please don't forget to LIKE, COMMENT, SUBSCRIBE, SHARE and hit that NOTIFICATION BELL so you don't miss any exclusive content! Also, follow me on Instagram @ / srtfied_392 and make sure to hashtag #SRTlute on any posts or pics on IG to show love to the channel and represent.
OEM Speaker Wire Diagram:
GRY/YLW front left tweeter +
GRY/RED front left tweeter -
GRY/GRN front right tweeter +
GRY/BLK front right tweeter -
GRY/PRP Front left mid +
GRY/YLW Front left mid -
GRN/PRP Front right mid +
GRN/YEL Front right mid -
GRN/TAN Rear left coax +
GRN/WHT Rear left coax -
GRN/BRN Rear right coax +
YLW/GRY Rear right coax -
Speaker Harness Adapters Part Numbers:
- Metra 72-7902 dash speaker harness
- Metra 72-6514 front door/rear deck speaker harness
- Metra 82-3016 dash tweeter universal mounting bracket
- APH-CH01 Pac Harness (needed for multi-channel amp LOC or sound processor wiring)
Car Club Affiliation IG: / streetpredatorzjax
Car Club Affiliation FB: / streetpredatorzjax
BIG SHOUTOUT to my Sponsor Insiders Custom Wheels!!! Make sure y'all visit their website and check out their crazy wheel inventory. Don't forget to DM me on instagram @srtfied_392 to find out how you can receive a 15% DISCOUNT on your next wheel purchase.
Sponsor Website URL: insiderscustom...
Sponsor Instagram: / insiders_custom_wheels
Another BIG SHOUTOUT to my other sponsors Carmarka & Carbon Auto Tuning!!! Make sure to follow them on instagram and check out their website as well as they have a crazy inventory of true classic carbon fiber and forged carbon parts and accessories for various vehicle makes and models. DM me on instagram @srtfied_392 to see how you can receive a discount on your purchase through them.
Sponsor Website: carmarka.com
Sponsor Instagram: / carmarka
Sponsor Instagram: / carbon_auto_tuning
Performance/Handling Modifications List:
- Billet Technology Oil Catch Can
- MOPAR Cold Air Intake
- MOPAR Strut Tower Brace
- BWoody Performance Front & Rear Sway Bar End Links
- Mid Muffler Delete
- Carven 5 Inch Chrome Exhaust Tips
Exterior Visuals Modification List:
- Brushed Cobre Ferrada CM1 - Front 22x9.5 (+12 offset)
- Brushed Cobre Ferrada CM1 - Rear 22x11 (+20 offset)
- Lionhart LH-FIVE front tires (265/30/22)
- Lionhart LH-TEN rear tires (295/30/22)
- 112mm True Spike Lug Nuts
- Window Tint (5% Sides & Back) (50% Windshield)
- ZL1 Addons Stealth Wicker Bill
- Gloss Forged Carbon Vinyl Wrap Accents
- Satin Black Rear Bumper Vent Decals
- High/Low Beam Headlight LED Bulb Conversion
- NoLimitz Car Designz Bottom Race Track Delete
- DayDay Custom Creations Top Race Track Delete
- Shadow Light 3D "Daytona Logo" Front & Rear Door Projector Lights
- GemPro LED License Plate Light
- Clear LED Sidemarkers
- REVION Autoworks Dark Smoke Taillight Tint Inlays
- Carmarka Forged Carbon Rear Diffuser
- Lighting Trendz Custom Headlight Work
- Lighting Trendz Custom Grille & Underglow Lights
Track/Drag Wheel Set Up:
- Bwoody Performance Shortened Rear Sway Bar End Links
- Forgestar D5 Drag - 17x10 (+30 offset)
- Mickey Thompson ET Street S/S (305/45/17)
All footage taken with iPhone XS Max.
DJI OSMO Mobile 2 Handheld Gimbal.
Video Uploaded & Edited on iMovies/FilmoraPro via Apple MacBook Pro.
COPYRIGHT DISCLAIMER:
Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use. No copyright infringement intended. ALL RIGHTS BELONG TO THEIR RESPECTIVE OWNERS.
Finally got it done. Figured it all out. I connected the high level wires from DSP to the gm02 harness and got sound. Sounds good. It was a struggle doing this for the first time. Especially when I only had a hour or 2 one day a week to mess with it. Thanks for the help. I appreciate it bro
Glad I was able to help💯
When you mentioned running speaker wire from the amp back to the ach-ch01 to utilize the factory wires to the speakers, that did the trick for me. Short and simple . Thanks again bro.
No problem, glad I was able to help.
thank you for the quick response.
Use the PAC AP4-CH41 R.2 guys it plugs into your Factory screen and everything works as usual.It gives you front,rear and subwoofer outputs and it comes with a bass knob.It also has an optical input so you can run it to a DSP of your choice if you want to use a digital input. If you are using the optical feature you don’t need to use any rca’s from the PAC unit to the back.
Most DSP’s require high level inputs which will not work with the AP4-CH41 as this kit bypasses the factory amps. If your DSP has optical inputs then this “may” work. Only reason I say may is due to the fact that I dont have any experience with doing a set up using optical inputs on a DSP. But for those without it, the AP4-CH41 will not work.
@@Srtfiedofficial i got .you My dsp has an optical so it was just one wire to plug in.It sounds amazing.Good job on your ride too keep it up
Oh ok nice and preciate it💯🙏🏽
@@Srtfiedofficial
A bruh was checking out your video good stuff. I have a issue with the AP4-CH41 R2 mode for amplified systems l i had it in my 18 Charger Scatpack with beats running 3 Amps total worked fine. I got my Factory order 2021 Charger Scatpack with Harmon Kardon so this time instead of running 3 Amps. I was just gone let Factory Harmon Kardon amp power interior speakers. And just use one Mono block for my subs hooked it back up and plugged in RCAS into Sub output on AP4-CH41 and subs have no sound. Checked RCAs Subs and Mono Block they are working fine any thoughts what might be going on wonder if unit has went bad?
If everything is wired correctly then yea your unit might have gone bad. Check all your wiring first.
Black and milds. My man I can smell the goodness already. Great vid too
💯🙏🏽
Great video I'm putting a dsp in a grand cherokee and this is the best video on a pac harness 01 I have seen
💯🙏🏽
Glad u doing video again... so detailed 👌👍😄😀 keep em coming.
We need a video on how to get sponsors...
Thank you💯🙏🏽 but ok I’ll definitely cover this topic in upcoming videos
Good looking forward to it. BTW you inspired me to do my system myself when COVID-19 first started and its still going strong. Do you plan on doing any suspension work to you charger?
Oh wow that means a lot but yes I do and that is coming very soon so stay posted on my videos😉
Great how to video , it helped me with installing speakers, amps, wires. Can you tell me which input wires from the harness you used to connect to the DPS inputs.
Thank you, i explained everything in detail in the beginning of the video.
Thanks you saved me $200 doing this myself!
$200 is actually extremely cheap for this type of install but money is money so you’re welcome🍻
Thanks so much for your time. Great video. Much appreciated sir.
Thank you for your support and tuning in😎💯🙏🏽
Great tips. I think I got it now lol. I have the Memphis DSP. 6 inputs 8 outputs. With the 6 inputs do I still need to wire speaker wires from the DSP harness to the male harness???
Not unless you need to convert the speaker wires to RCAs. If that as already done via the PAC Pro you mentioned you have then you only need the harness for you power, ground and remote wires for the DSP itself
You can flip the emblems over on your JL amps so they’re right side up. Nice install!
Yea I know but not too worried about it cause its not something that is seen but thank you
@@Srtfiedofficial So how are you liking the DSP? I have an SRT8 Charger with a similar system. I don’t have a digital DSP though. Do you find yourself adjusting it often or do you have it set in the middle to cover a variety of music? The one thing stopping me from adding something like that is I think I’ll be constantly adjusting it. Lol!
Ive been running this DSP for about 7 years now and love it! I highly recommend it to anyone with a sound system. Its like the icing on the cake similar to a tune for your car. In the beginning I was adjusting it a lot because I found myself needing to make slight tweaks based on the music I like to listen to but once I got it to where I liked it I never had to make anymore adjustments to it.
I've watched all three videos 5 times or more, thank you for the videos, I have a 300 w/ Alpine system, I cannot decide whether or not to run all new RCAs or not. Do you think your factory wires are limiting your sound output or can they handle the amplified signal just fine?
The factory wires are plenty for the factory speakers. If you’re trying to improve sound without changing everything out or adding aftermarket subs, amps and etc. Then I suggest just changing out the factory speakers but make sure they are 2ohm speakers with high sensitivity cause 4ohm or higher you’ll end up loosing a lot of volume.
How do the chimes, phone, and backup stuff work. All as before?
Depending on how you wire it, it will all work as advertised. However, the best way to wire it in a charger to where you dont have any hiss or etc. you will loose the back up chime but the music will turn down a bit instead of the audible chime coming on.
Yes boss I want your help how to do the wiring bit ten process input and output it’s bit complicated
Just DM me on IG and i’ll help as much as i can
There’s only 1 sub rca output from dsp, how you connect two on the amp ?
With an RCA splitter cable
Learned a lot from your video . I have the 2012 ram sport with the same alpine amp location. Why is crutchfield telling me I need the apsub-ch21 when I can get a full range signal with the harness you’re using from the factory amp? All you need is one or the other ? Correct me if I’m wrong but I think I’ll be just fine with the ach-ch01. Is that correct?
If you’re just adding a sub alone then thats why it’s probably giving you that option. If you’re upgrading everything and amplifying your full range speakers as well then yes you will need the harness I used in this video or if you’re not using a signal processor or different brand LOC then you could also use the AP4-CH41 which bypasses the factory amp and comes with its own LOC. I recommend going on the PAC audio website to see what’s compatible for your truck.
great video
Thank you💯🙏🏽
When I plug the GM 02 kit into the factory amp I don’t get any sound,only rear deck woofer. When I unplug it and plug the factory amp harness back into the amp sound is restored to all the speakers.
Need more context than that but sounds to me that you wired something incorrectly
just saw you video ,great sound system set up. Did you upgrade your electrical power any voltage drop? I got a 4000watt system upgraded the alternator and still having issues with voltage dropping in the low 12s.
Thank you and just slightly dimming the lights at full volume. Im only pushing 1350 watts RMS total as well so the chargers current electrical system can handle that with ease. Your situation may call for a higher amp alternator and/or second battery.
Guys, best DSP’s to look at are. Helix , Zapco, and Mosconi. Mini DSP is pretty nice also. Alpine has a new one also. If you do run a DSP, most definitely should have the car tuned using a RTA. Very few are really good at tuning.
Great video by the way I just have one good question on the hardest instructions it says that you only need the black connector if you're going to leave speakers running from the factory amp in which case I'm not I see that you connected the black harness back to the factory amp are you running some speakers from the factory amp
No i used the factory amp wires to run to my Sound processor and then ran speaker wire from my aftermarket amp back to the speakers at the harness location
So what do I connect the stand alone black connector wires too
Some wires arent used but i explained in the video which wires get connected of you’re wiring everything like i did in this video
I have a Charger with the Harman Kardon system. I am adding the 2-10" subs from a Challenger with the Harmon Kardon system, on its own amp. Can I just tap the stock 8" sub in the rear deck for an LOC for the external amp? Im not removing the 8" stock sub, just adding onto it.
Yea you should but you will need to get an external amp to power those subs
@@Srtfiedofficial Yeah, I have my eye on some small amps, between 50 & 100watts for those subs.
How did you run all the rca wires into the dsp???
The DSP converts the speaker wires into RCA’s that run from the DSP to the amp. Those RCA’s on the DSP are outputs not inputs.
Currently have a 2021 challenger rt with 2 kicker subs in a ported box swapped out the splines for ds18s on the mids and highs running a 4 channel and amp for subs by ct sounds and a battery pack I have a bass knob as well I believe my installer said I have a lc6 or 7 for the converter I was thinking of adding the dsp by prv would that benefit me ?
Yes! A DSP is always beneficial. I always make comparisons that a DSP for your car audio is just like a tune for your car after you added bolt on performance mods
I have a 2019 charger scat pack alpine 6 speaker. I want to install the pac amppro ch41. Can I run my speaker wires out from the ch41 harness out to my dsp? Or do I need to use the other harness, and come off the factory amp under dash left side?
If you’re adding a sound processor with the pac amppro you will need a sound processor that accepts rca inputs and outputs which im not sure if there are any on the market. You will need to use the harness that i used in this video instead as most (if not all) sound processors will require your amplified high level speaker inputs before it gets converted into low level rca’s. Using the amppro bypasses the factory amp.
Hey ..I have a 2012 dodge charger can you tell me is there a wire kit that I can by pass the factory amp..and add my own amp...because sometimes the factory amp doesn't turn on ....I will have no sound coming from the front speakers...
Yes pac audio makes one. Its the AP4-CH31. It plugs directly into the uconnect behind the radio and bypasses the factory amp all together.
@@Srtfiedofficial Thanks, if I was to install the Metra kit 99-6520b...this kit still uses the factory amp?..or can I add my own amp?..
That Metra kit allows for you to install an aftermarket double din radio which will come with RCA outputs bypassing your factory amp for your aftermarket amp
Hey man! Quck Q,, for chargers srt8 ,,, is it ok to use A/Bamp or D class for cabin spkrs ? Thnx bruh,, should would 2 D amp 4 ch nd 1 ch be better then 5ch a/b with 2ch D ,,,
Id recommend A/B amps for coaxials or components and D amps for subwoofers or mid bass drivers
do the bit ten make the speaker level Hi- input flat if the input signal is not flat.
Yes, it comes with a De-equalization feature that flattens the processed signal prior to getting to your amps.
@@Srtfiedofficial thank you. Great video and thanks for responding
💯🙏🏽
Hay man, great video. If you are only using a 4 channel amp, are you running the rear deck speakers off of the OEM amp? If so, how does that translate to wiring?
Thank you but No i have all my speakers running off of my 4 channel amp. My rear deck speakers are hooked up to the rear channels and my front component speakers are ran off the front channel. Since the fronts are components, i have my mid bass drivers in the front doors and my tweeters in the dash. The amp wiring is going from the amp to the crossover for the component set
@@Srtfiedofficial Gotcha! What are speakers and crossovers are you running on this setup?
The crossovers come with the component set but im running infinity reference ref-9630CX components in the front and infinity reference ref-9633IX 3 way coaxials in the rear.
ok i have a 07 dodge charger with the amplified bose system....now i bought a dodge magnum for a parts car for the hemi and all the wiring...to install in my charger the magnum does not have a amp . can i install my 07 charger amp system with the magnum wiring..?...thanks
I dont see why you couldnt! Ive never done that before so I wouldnt be too much help for you on this.
@@Srtfiedofficial ok thank you
What about 2018 dodge charger sxt plus apline speaker
The OEM Alpine sound system in the chargers (All Trims) are all the same from 2011 through 2024.
So this will bypass the stock amplifier and allow to hook Miss and highs up ?
No this will not bypass the stock amp! If you want to bypass the stock amp you will need the AP4-CH41 kit from PAC. What I used in the video is for people who want to add a sound processor or if you’re trying to wire up a line output converter for multi amp systems.
What did u do w the rear 3.5 in the doors? Did u by pass them ! I ask cus i wind up upgrading my system w the 14 charger model pac -ch31 for harmon kardon nd used the rca lines to my 2 amos 1 5 ch A/B vegga 2400w nd a trx rockville 2ch D block 2400w , and wind up using ds18 tweeters 500w in dash2, then 2 6/9 component infinaty doors nd then deck is 2-6/9 5 way coaxile nd 2 -12infinaty 1200w subs in trunk !! The system sounds comoressed nd tight bass punchy very consistent nd no distortion at all!! Nd the front stage is crisp nd great mid bass !! But the highs really mizes into the front stage nd rear mix very well!! I fid by pass rear doors !! But i am thinking in using the ds18 tweets in the rear doors just ta even out the rear stage w the front for high frequency !!! Btw all this with out the processor ,, i might use the processor only bc i might get another amp to drive highs on rear doors nd may be 2 more tweets on deck !! So yup i dig all bout you upgrading information that you simoly rocked bruh !! god bless man ttyl m watching u lol
Thank you but my charger didnt come with the 3.5 inch speakers in the rear doors
@@Srtfiedofficial may b u had them in ur blk srt!!! If u had harmon kardon u def had them
Nope, didnt have them in my 13 SRT8 either as i had the alpine system in that one.
Good video bro very firm . I have a question . I got a 2019 skat with the alpine I used the harness as you explained I ran the female to the amps and male to the DSP on my aftermarket tweets and mids . I’m not getting anything out of the audio control I hear a small popping noise but no music. Did I do something wrong ? Also can I just run the ch41 ? There is a amp for the tweets and one for the mids
Thank you for your support💯🙏🏽. When you say you ran the female to the amps and male to the tweets are you talking about the RCAs? If you have an IG account DM me so I can possibly get pics of what you’re talking about. But yes you can just run a 4 channel amp to your mids and tweets however you will only be able to do so on on stage meaning the front stage or rear stage alone. That type of setup means you’re running an active setup.
So I’m saying I did the wiring as explained in the vid. I have a amp for tweets and a amp for the mids and bass amp (3amps) I’m using the pac harness . I ran the male side to DSP and the female sides of the harness to the aftermarket amps . But I’m not getting any music just a popping sound I was just wondering if I may have wired something wrong ?
What’s the IG page
My IG is the same as my youtube but all the wires from the harness should be ran to the dsp! The only thing coming from the dsp to the amps are the RCA wires. Then you run your speaker wires to your respective speakers.
Any progress. I'm in the same situation. I can't find stock amp.purple and green wires make popping around with AA batt. Except for the grey and white wires don't pop or play audio. I'm also using ch41 with little luck getting aound
I have 2 amps 1 DSP. How do I route the rca cables??? Using an amp pac pro gm61.
First question is does your DSP have RCA inputs or does it have speaker level inputs that convert to RCA outputs? If your DSP has RCA inputs then its a simple setup where you run your RCA wires from your amp pac pro to the DSP and then from the DSP to your two amps.
@Srtfiedofficial it's both on the dsp. Should be simple then. If I get right with your help LUNCH ON ME!!! lol
Yea it should definitely be simple if your DSP has RCA inputs as your PAC pro already converts your speaker level inputs to RCA’s. The DSP at that point is just an inline advanced EQ tuner versus what i have which is essentially that and a LOC combined in one unit.
So even though you have rca cables you still had to wire up the speaker wires to the DSP??? The dsp wire harness????
No, if your DSP has RCA inputs AND outputs then since your PAC Pro already converts your speaker wires to low level RCAs, there’s no need to tap and wire speaker wires to your DSP. Just run the RCA wires from your PAC PRO to the DSP and then another set of RCAs from your DSP to your amps.
I have the same alpine system in my 2015 dodge challenger and I plan on running the dash speakers off my factory amp and all the other 4 speakers off my 4 channel amp. I was reading on the manual for the aph-ch01 and it says if you're running any speakers off the factory amplifier to use the black speaker harness. And it also says to use the white connector from the aph ch01 to the factory amplifier when using a pac amp pro interface. If I only plan on using factory power for the dash speakers will I only use the dash wires on the black harness and other 4 channels on the white harness?
And still trying to figure out why you got so many wires coming back into your trunk!
Your question will require a much more detailed answer so if you have an IG account please DM me. But the process of wiring an aftermarket amp with this pac harness is the same even if you want to keep your dash speakers running from the deck. The only difference would be that you will tie the dash speaker wire together on the harness versus what i did in the video. I explained in detail every step i did and what each wire is on the harness including corrections along the install so you may have to watch the video in full from start to finish.
I have so many wires because four sets of wires is what is getting wired to the processor and the other four set of wires are getting plugged into my aftermarket amp which are the wires going back to my speakers. I just wired everything at the harness utilizing the premade splices.
I'm back again just need your opinion I purchased some Infinity Reference 3.5 inch speakers for my dash and purchased some CT sounds Strato which I was foing to install in my doors but do you think that would be too much highs for the front of the car? Should I put the 6x9s in the rear deck instead and maybe some mid bass or midrange speakers in the doors?
Honestly up to you and how you want your system to sound. The gear you have right now will sound good and the highs will not be over bearing as its in the doors unless you get custom kick panels made
Hi, my alpine mono amp doesn't have a Subsonic filter, can this tune that feature? thanks.
Yes it can. It does that and more, much more!
@@Srtfiedofficial it arrived today, can't wait to install it, thanks for the help.
No prob. You’ll love it.
So can you use different processors for that harness
Yes! The harness can be used with any processor or LOC as the wiring will be the same
Can use the bit ten for two subs are just one
Can use it for however many subs you want
Where did you get all the wire for the factory amp
I have the pac harness part number listed in the description which you can get through amazon. However the rest of the wires I got through knukonceptz.
I have pretty much the same setup in my 2020 wb scat. I am having a few problems with my bit ten. (I think the bit ten is the problem). I have the bit ten set to turn on with the speaker input, the bit ten is always on(the blue led). The remote out does not give a remote signal. When I connect to my pc the bit ten disconnects immediately or a few seconds after (I am going to try using a different laptop). Lastly, I have no sound. This may have something to do with the bit ten disconnecting.
I bought the bit ten used off Amazon, I still have a return window. Any suggestions on how to fix the issues I am having, or just send it back.
The dsp is/was receiving a signal in, I was able to go through the setup process. The bit ten was able to detect clipping.
If I unplug the processor, you can hear the speakers pop for a second.
On the graph above the eq, I don’t have a sound wave, so maybe I am not receiving a signal
I have a bit ten D if it makes a difference.
Return it as you got a defective one
Thank you
What dsp would you recommend out of the bit ten, audio control DM 608, the Rockford Fosgate DSR1, or the hertz H8? Or just get a line output controller that has all the channels I need like the audio control lc7i
If you dont care about having full EQ control over your sound system then a LOC will suffice but if you want a good DSP then the JL Audio TwK-88 and the Hertz S8 is what Id recommend outside of the audison bit ten or bit one.
@@Srtfiedofficial I put the return request in earlier this morning. The company who supplied the bit ten offered to exchange it with a brand new one, so I will go that route.
I do greatly appreciate you responding to me in a timely manner. I usually don’t mess with factory head units, but because of your video, I went ahead and did the work myself. Honestly, it was not as bad as I thought it would be. Thank you for the installation video and your time.
Bruh awesome vid ,, in my case i have the harmonkardon nd was todo to buy amp pac pro4-ch31 interface to conect behind my head unit oem screan ! But then i was also told to get an DSP 608 ,, so i did ,, as for nit having correct fade eq resppnd as is righ go left nd left go right in screan fading !!! So now doni have to first tune the DSP on lap top first before hook up ? Nd were do i hook the dsp with the pac4 ! Nd do i need the extra harness ? Ty if u can quick guide will be great ty
You tune the DSP after you hook it up! But with the Audio Control DSP you have you essentially run the RCAs from the pac interface to the DSPs input section (the mono inputs/outputs is for your subwoofer) and then run another set of RCAs from your output section on your DSP to your aftermarket amp/amps. In simplest terms the DSP gets hooked up in line between your interface and amps running to your aftermarket speakers. You shouldnt need the extra harness.
@@Srtfiedofficial thnx bunch ,,, instructions of the DSP 608 states to update program prior to install ,,,, nd theres a lap top code 1234 to insert so that it can update sofwear ,,, nd then after that ,, they say start instalation/wire connection nd then tuning after connecting amp/amps!! This DSP608 is very upscale as for its features , but anyways i thank you , for that input bruh subbed 👍🏼💯
Yea you want to make sure the firmware is up to date on the DSP prior to install! I forgot to mention that but as far as setup and tuning of the DSP, you want to do that after install.
@@Srtfiedofficial copy 👍🏼🙏🏼
Btw,,, what is ur 2 blk boxes on top if the processor ? In the right side of ur rear seat? Nd are they required if m running the dsp dm 608 nd amp pro pac4-ch 31 interface ? Ty
การบัดกรีสาย เครื่องเสียงภายในรถ ผมว่าใช้เงินบริสุทธิ์ แทนตะกั่ว น่าจะดี
I used the same method only difference is i used an Eq instead of DSP, my front speakers are making a crackling popping noise when turning up volume loud. Would changing the Eq to a Dsp fix my issue?
No, if they are popping then thats a key indicator that your gain levels are set incorrectly.
So my Eq is not connected to a rca from the head unit, it’s wired directly from the pac harness. Do you think that could cause an issue?
Your EQ will be connected after the LOC you need in order to get your RCA outputs. The EQ will be between the LOC and your aftermarket amp
@@Srtfiedofficial hey man, is the DSP better than an LOC? Also since im keepin my stock radio, is it possible to add an equalizer? Bc i know the stock radio wont put out as much power as id like
Its not that its better, a DSP is an LOC and equalizer mixed together in laments terms. A DSP also has additional features that a general EQ doesnt have. So if youre looking to add an EQ then yea a DSP is a better choice and requires less equipment to wire up.
Is the Audison also a loc
Yes
🔥🔥🔥 I need to get mines done
Yea fam it makes a world of difference!
Where did you mount your crossover for the door and tweeter components
Its mounted right above my DSP. Its the two black boxes in the thumbnail of this video and you can see how everything looks towards the end of the video
Ok. Im thanks. Im trying to gather as much info as i can because im going to be doing this all by my self. Im going to go with the audio control D-5.1300 amp with dsp but its 4 channels and 1 sub channel. But my 300 has 6 channels and was trying to figure out how to power it all up with one amp. And components for the front would require 2 channels and rear speakers 2 and my sub 1.
Your mentioned setup is the same as mine except you’re running different parts with a amp that has a built in DSP so wiring it up will be the same as in this video.
@@Srtfiedofficial yeah i wont be able to do it until springish but i wanted to find a simple solution to power all my speakers with one amp. I will also be using the PAC amp pro ap4-CH41 to get my signal. But i got this video liked incase i run into issues.
Yea initially i had a 5 channel amp but needed more power for my sub and most compact 5 channel amps dont offer enough RMS output on the sub channel which is why I ended up with a dual amp setup
I ran everything the same way but I’m using a Lc2i pro instead of that bitten and my rear dash speakers aren’t getting any sound expect som static then everything turns off after a min or 2
You couldnt have ran everything the same way with the LC2I as it only has two signal input channels. My bit ten has 4 input channels. If you wired yours the same way i did then that may be why you’re having issues. With the LC2I i recommend getting your input signals from the rear deck speakers only versus the front dash and door speakers like i did in this video.
Great content Subscribed ASAP
# 🚗 🚘
Preciate it💯🙏🏽
I'm curious and maybe you cN help me. I have a 2019 rt charger and I installed 3 1/2 inch infinity reference ref-3032cfx in the front dash, jbl clubs 6x9's for the rear and front doors. would a sound processor fix the front doors from just putting out bass notes to be able to hear words?
You will need to wire an aftermarket amp to them in order to get full range sound out of your front door speakers. You dont need a DSP for that but just replacing the speakers alone will not fix the factory crossover settings coming from your factory amp.
thank you for the quick response.