E-flite® Timber X 1.2m PNP & BNF Basic
Vložit
- čas přidán 7. 09. 2024
- Please click "Show More" for links and more information.
Please visit www.horizonhob... for more information on the E-flite® Timber X 1.2m PNP & BNF Basic.
The E-flite Timber X 1.2m unleashes a new era of STOL plus 3D aerobatic capability. Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly “mild to wild” experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe that’s capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. It’s also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!
eXtreme Maneuverability:
The Timber X 1.2m features a new wing design with a shortened span plus much larger ailerons and flaps, along with an enlarged elevator and rudder. Double-beveled hinge lines make it possible to deflect every control surface, including the flaps that can now travel in both directions, to high angles for outstanding control and eXtreme 3D aerobatic capability. Pockets in the rear of the fuselage and the included optional-use steel stabilizer joiner give you additional options to fine-tune the model’s performance for even wilder 3D setups-or on low rates the controls can be as smooth and docile as they are on the original so you can fly as mild or as wild as you’d like!
eXtra Power:
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and vertical performance with a 4S battery without the need for any modifications or upgrades.
eXtremely Durable:
Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Timber X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and oversized tundra-style wheels of the original model so you can fly aggressively from almost any surface.
STOL (Short Takeoff and Landing) Capable:
The new wing design has a shorter span yet almost as much wing area as the original, plus it features drooped wingtips and can be equipped with the included optional-use leading edge slats for improved slow flight and STOL performance. These features, along with the lightweight design, oversized flaps and high-power brushless motor make it possible to spring into the air or float down to land in as little as two feet or less.
LED Lights:
Like the original, the Timber X 1.2m comes with realistic-looking LED landing, navigation and strobe lights that are factory-installed and powered from the flight battery.
Optional Floats:
Owners of an original Timber 1.5m model can use the float set it came with on the Timber X 1.2m, or the EDO-style float set is available separately (EFL5261) and includes the required mounting struts plus a dual-rudder steering system for excellent handling and easy takeoffs and landings on water.
Features:
• Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
• Enlarged and oversized control surfaces with double-beveled hinge lines
• Six durable and factory-installed high-torque, metal-geared servos
• High-power 3S and 4S compatible brushless outrunner motor and 50-amp ESC
• Shock-absorbing landing gear with oversized tundra-style wheels
• Functional and factory-installed LED landing, navigation and strobe lights
• Lightweight yet durable composite-reinforced, hollow-core EPO construction
• Optional-use leading edge slats for improved STOL and slow flight performance
• Optional EDO-style floats (EFL5261, sold separately)
Features (BNF Basic Only):
• Spektrum™ 6-channel receiver with industry-leading DSMX® technology
• Unmatched stability and precision of AS3X® technology for smoother flight performance
• Easy to fly with optional-use SAFE® Select flight envelope protection
Horizon Hobby is on Facebook! Visit us @HorizonHobby
Follow HorizonHobby.com on Twitter @Horizon_Hobby
Share your RC passion with Horizon Hobby on Instagram @Horizon_Hobby
Looks like HH has been listening. Looking forward to this one!
Think I just found my next plane. Looking forward to testing this one. 😊👍
me too !
i love the timber and the umx timber so im sure im gonna love this lone too.ill have to have it
Couldn’t decide between this and the Turbo Timber, Got this in the end and it performs amazingly!!!
Perfect for me! I'm in this spring. Perfect size for transport and covers everything from one parkfly airframe 😍😎
Awesome, got to have one. Well done eflite, horizonhobby as always. Thank you for your video and time and knowledge. Just having fun RC'n with friends. That was some awesome skills at the sticks 👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍👍
I didn't know I wanted this until now! Looks like I'll be getting one when the weather improves. Great job Horizon!
@Todd m I think you were trying to say that to Maximus Lockhart, as I made no mention of floats...
I wish they had planes like this when I learned to fly, and it wasn't that long ago either. Looks like fun and those were some serious piloting skills as always.
I picked one up just last Saturday. Looking forward to flying it!
Looking forward to receive my new Timber 1.2m ! Looks Great !
Thanks HH !
! For another Super plane!
I've had mine for a month now, finally got some free time and nice weather. It flies like a dream! It takes off really quick, maneuvering is precise and quick, and landings are nice and smooth! Unfortunately though I had found a weak spot. Upon a relatively rough landing I had completely broken off the right landing gear base. Hopefully the model glue for the plastic and foamtac for the foam will be a strong enough repair for future flying.
ugh... just please make an f7f or mosquito umx plane! i would buy one for sure! idk what people are buying most of so i couldnt factually justify it. but those umx's are perfect for my flying areas! and they are sweet models to look at and extremely easy to display!
Omg...... I need this plane I got both timbers and they are amazing especially the mini, this would be perfect to add to the hangar!
Well Done! Looks fantastic!
ok, I just might park the Tundra after seeing this thing perform. Wow, horizon nice work.
now i am stock between buying the UMX or this one, the umx because we dont have our local field anymore so i would use it as a park flyer but the power of this one oooeeehh
Looks like fun
You guys seem to be on a major roll (no pun intended). Get it?
This could be the best airplane ever
Awsome!!! Love my Timbers. Hope they do a Umx as well. Now a couple things here....One they should have done the battery hatch topside...two they should have redesigned the lame landing gear....cant wait to get one.
I bought the umx waco, i love it, this might be the next one 😍
Just got mine. Using a spektrum dx6i. Has anyone reported problems with elevator and rudder not quite returning to straight and neutral after moving the stick? For example if I move right rudder, it stays slightly moved to the right when I let go of stick. If I give a little left rudder, that will straighten it. I disconnected rudder to verify it moves freely. When I move rudder servo when it's disconnected from the rudder, and watch the wire pushrod, I can see its the servo that's not returning. The wires inside the plastic tubes are squeaking pretty good when I move elevator and rudder. None of my other models do this with this radio.
I love mine!!
That’s awesome!
I just wish it Had a different Colour Scheme!! SHAME
I Would definitely buy and I know a lot of enthusiasts who would order if it had a better livery? Please bring out another Version Horizon with different Colour Options 😄😀😀
Wonderful! Just wonderful!
Right before you released gen 1 I bought a durafly tundra! The thing is amazing. I'm sure it's no HH product though. Sad day!
I asked for this on the latest vid from horizon 20 mins ago!!!!!!!!
I absolutely fuckin love this airplane scuse my French I used to be in the RC years ago but I developed in the phobia of flying I ordered it a friend took it up I got back home with it flew at my field cuz I didn't have a AMA to fly out there with my friend flies like a freaking trainer but yet 3D capable
This is awesome! great job Horizon. May I suggest a Carbon z Aero Commander with flaps and lights? One can only dream... I love my CZ 150
oh, and retracts too
Cooles Teil👍😎
Awesome!
At 52 seconds the Flaps move with, but in the opposite direction as. the elevator. doest that give you more control when flying 3d?
Omg omg omg I need this now!!!
Does the X have larger tail surfaces than the Turbo? I was looking at the manuals for both and it looks like the Elevator and Rudder are identical to the Turbo.
Nice, just nice. 👍🏻
Absolutely outstanding! :)
So Awesome!
Got the 1.5m so this is defiantly going to be added to the hangar
I would like to see a comparison to the old timber. Just for the hell of it. I WILL HAVE ONE BAD A$$!!!
You guys should hire me to help you get some air to air footage of these in flight. 🤠👍
It's like the perfect acft! I must have this plane. LOL
I wonder if HorizonHobby is making a Carbon-Z version of the Timber
HOPEFULLY WITH A BETTER LANDING GEAR SET UP...
Nice plane!!! Need to get one of those!!! Do you have a reseller in Spain or in Europe? Other option would be to ship it from a warehouse in Europe. If you ship from the US I will probably have to pay customs and those charges could be steep. Let me know and thank you very much.
Why do you put SAFE in all your new planes? Just something I have noticed recently.
I've got a question. I want to fly but at the moment I only have a 4s 3300mAh battery with me, but the recommended range is 2200mAh-3200mAh. Will I do any damage to the plane if I still use the 3300mAh?
Mah is only the size of the battery in how much power it holds. As long as it's not got more output than the 3200 mah it should be fine. I don't think the 1000 extra mah will even mess with CG. I could be wrong on that tho.
Does the battery still have to go in the bottom? That's the worst thing about that plane....
I'm wondering about that as well, installing the battery was always a pain on the original. And hopefully the stock battery mount is enough to handle all that intense 3D action, on my original, I was always worrying that the battery would slide back if there was too much upward pitch. Still, a 3D Timber looks like a lot of fun.
Zooming in on the pictures on the website it looks like battery hatch is underneath, same place as original Timber :-(
Lame, thats the biggest reason I dont buy one. My TUNDRA is SOOO EASSYYY to get the battery in and out, especially with floats on!
I hate the battery compartment on the 1.5 m Timber. However, the way it flies makes you forget about it. I waited a year to buy one and kicked myself for not getting one sooner. I kinda want one of these, but I am going to save up for the Timber XL.
How much? Looks like a lot of fun!
BNF Basic $249.99; PNP $219.99
U guys should have it RTF
I was given this as a beginner by a person who knew nothing about it and a
Crashed on the first flight
The Timber X is definitely not suitable for beginner/first-time RC pilots! One of our purpose-built/designed trainer models will be better suited for beginner/first-time pilots (while the Timber X is a model most people should wait to fly until they have mastered at least the trainer...and maybe one additional "next step" model): www.horizonhobby.com/airplanes/by-type/trainer/?cgid=airplanes-by-type-trainer&prefn1=brand&prefv1=E-flite%7CHobbyZone&srule=best-matches&sz=24
well it looks like I might now have 3 different timbers in my hanger now, maybe 4 in the future (XL- timber)
Coming to my door the day before my Bday...currently holding my breath 🤢
So it's like the Night Visionaire with a different paint job?
HA Not even close. 2 completely different 3D planes
NICE L@@Kin! Thanks
Was a 3s or a 4s battery used in this video?
4s ;)
OU peut-on acheter cet avion EN FRANCE ?
I am extremely dissapointed after opening the box and seeing the 4 min timer. Yawstonished really.
Omg I need I need!, gimme! gimmie! I need I need! 😓😖😓
Hangar 9 makes foamies on smaller scale, and balsa ARF on 10cc and bigger.
It only flies good cause its no wind, fly that on a 10 to 15mph, no foam in the field, just balsa.
why the music
Let me guess. £250 without looking?
Make a 3D Apprentice!
I want to pay $150 for one
All of you put this on back order. I hate you.
I’m kidding. Kinda.