I didn’t even think about watching CZcams videos for tips… I’m currently getting my top-pick training and it’s going pretty good. I’m comfortable in the machine and I’m definitely using all my buttons. I was told the same thing when inching into the pile, don’t turn your wheel. It’s a habit I know, but it’s great practice to use all your buttons to do any adjustments… Also a nice tip when your bridal starts swinging, “just land it to stop it.” Never being inside a top pick before, I always had a notion that the slightest touch of the bridal would cause a box to slide or tip over, but I’ve learned that these boxes can handle a bit of “love taps” (all within reason of course). Definitely learning a lot this week. Let’s see how it goes on Monday with loaded container because that’s when thing will get real! Good job, and appreciate you sharing your knowledge. 💯 when you stated that we all want to go home safe to our families
I just want thank u my brother I just past my tophandler training today because ur video taught me more than my trainer if I would've listen to him I would've failed appreciate u FROM LOCAL10
This video was very helpful. Because it had a lot of specifics on working the controls. I would definitely appreciate more like this. Thank you and great job
I'm not a tophandler driver but I do operate a large model Taylor Big Red forklift for a sawmill. I wish forklifts had some kind of button on them that would correct being crooked like the slew function on these! Bc our packs of lumber come down a set of roller chains you can't push against them to get straight like you can in many cases bc you'll push them back down the chains. But a bigger issue is being crooked out in the yard where we stack them bc we often end up that way due to all the ruts, mudholes, and completely uneven terrain. It's very difficult to back up slightly and make a minor correction when one wheel is down in a rut and it takes alot of pressure on the accelerator just to back out of it at all. Minor adjustments are a huge headache out there for sure.
I did this kind of work for ten years with same type of machine but sitting lowdown with lift cylinder in your face. It takes practice many hours. when you do it long time you can come in to a can and only use two controls up and down +steering.
@@deshu220 I work for the Port of LA, it's one of the jobs that requires you be in the union where I work. It's a really hard job to get into, they only hire maybe once a decade.
Congrats brotha!!!! I used to work for CAL-LIFT authorized dealer that sells TAYLOR “big red machine” we would go to the ports of LA to built them. Pretty sick machine! At the time they would cost 500k (2006)
Um yes hello, is there a domestic version of this? My wife is rather hard to move and she is already equipped with locking pineapples or maybe just regular pineapples.
I didn’t even think about watching CZcams videos for tips…
I’m currently getting my top-pick training and it’s going pretty good. I’m comfortable in the machine and I’m definitely using all my buttons. I was told the same thing when inching into the pile, don’t turn your wheel. It’s a habit I know, but it’s great practice to use all your buttons to do any adjustments… Also a nice tip when your bridal starts swinging, “just land it to stop it.” Never being inside a top pick before, I always had a notion that the slightest touch of the bridal would cause a box to slide or tip over, but I’ve learned that these boxes can handle a bit of “love taps” (all within reason of course). Definitely learning a lot this week. Let’s see how it goes on Monday with loaded container because that’s when thing will get real!
Good job, and appreciate you sharing your knowledge. 💯 when you stated that we all want to go home safe to our families
I just want thank u my brother I just past my tophandler training today because ur video taught me more than my trainer if I would've listen to him I would've failed appreciate u FROM LOCAL10
This video was very helpful. Because it had a lot of specifics on working the controls. I would definitely appreciate more like this. Thank you and great job
I know this is 3years old but thank you for this. I was once a steveador on the docks. Miss the sounds of the "hoisters"❤
Great video .... I'm a retired tanker driver so I'm gonna get a job doing this.... thank you for this video!
Thank you, Great explanation 👍
Good info, brother.. Many thanks!!! 🙏🏽🙏🏽🙏🏽
Nice content on teaching on how to drive a Toploader
this put my understanding through the roof thankyou
Thank you so much I learnt a lot you're teaching was to learn what a great video❤
I'm not a tophandler driver but I do operate a large model Taylor Big Red forklift for a sawmill. I wish forklifts had some kind of button on them that would correct being crooked like the slew function on these! Bc our packs of lumber come down a set of roller chains you can't push against them to get straight like you can in many cases bc you'll push them back down the chains. But a bigger issue is being crooked out in the yard where we stack them bc we often end up that way due to all the ruts, mudholes, and completely uneven terrain. It's very difficult to back up slightly and make a minor correction when one wheel is down in a rut and it takes alot of pressure on the accelerator just to back out of it at all. Minor adjustments are a huge headache out there for sure.
Beautiful Bro, Beautiful. brilliant,
may the Lord be with you Bro, and may God protect you...
I did this kind of work for ten years with same type of machine but sitting lowdown with lift cylinder in your face.
It takes practice many hours. when you do it long time you can come in to a can and only use two controls up and down +steering.
Great video! I start training on Monday
Where do you get trained to do this?
@@deshu220 I work for the Port of LA, it's one of the jobs that requires you be in the union where I work. It's a really hard job to get into, they only hire maybe once a decade.
Congrats brotha!!!! I used to work for CAL-LIFT authorized dealer that sells TAYLOR “big red machine” we would go to the ports of LA to built them. Pretty sick machine! At the time they would cost 500k (2006)
That's so cool like ur videos bro😊
You didn’t mention that you need to be sure that you’re not in Wide pick mode, you’ll take the can behind it too 👍🏼
0
Very educative ❤❤
Great information thank you
Is there any professional course I can take on?
Where can i purchase the horn?
This main is good brd
It's kinda informative. I used to manuever an empty container handler, the so called sidelifter.
How do I get top handler training? I'm in Cincinnati Ohio. Thank you
Good❤
Um yes hello, is there a domestic version of this? My wife is rather hard to move and she is already equipped with locking pineapples or maybe just regular pineapples.
how much is the pay for this job?
Good stuff hommie
You done training? Haven't seen anything on the ig! I was training local 23 last winter learning to train. Laid off for now until the contracts over.
Wow that's great
Am new student now about to graduate reach stacker my biggest fear is 3 high😢
Good trainer bro im rookie just starting would
Like your training
VIP trainer
Cool bruhz 🤙🤙
I want more exercise
You know you pissed off the operator when they intentionally slam the can on the chasis....
#cHRiStiANSoLdiEr 🫡