Video není dostupné.
Omlouváme se.
The Fender Squier Debut. Cheap, Chinese and Name Brand?
Vložit
- čas přidán 5. 04. 2024
- __ PLEASE SUBSCRIBE __
The brand new Fender Squier Debut! We talk about this very affordable guitar.
amzn.to/3TPYcup
Specs:
Poplar Body (1.6" thick)
Maple neck
Indian Laurel fretboard
25.5" scale length
9.5" Fretboard radius
1.62" nut
21 Frets
Chrome hardware
S-S-S
Ceramic single coil pickups
5 way switch
tremolo bar
6 screw bridge
cast saddles
3 ply pick guard
Matte finish
no finish (or very little) on the neck and headstock
Made in China
Seems like a perfectly fine, basic guitar. Good honest review as well. I'd likely search for a different used guitar that may be a bit higher quality for the same price, but I certainly wouldn't complain if I were to play this model.
There are some better Squiers for sure. If you can get a MIM Fender in the $400 to $500 you're getting a good deal. I'd say out of all the "cheap" guitars I've reviewed, I'd put this one near the bottom of the list.
Love the shout-out to Joe! Great channel, man. Yeah, this guitar was/is quite the mystery - thanks for helping unravel it. The silence from Fender *really* baffles me, especially given their rollout of the Sonic.
No problem. Thanks for tuning in. It will be interesting to see how this plays out.
Joe seems like a great guy, I enjoy his channel.👍
@@kennyg63 I agree. I like the live show.
Thank you for the review. I've been looking for a "cheap strat" for a project / rebuild. Looks like this may be the contender. I appreciate you taking the time to do the review. subscribed.
No problem. Thanks for watching.
Quality of Squire guitars has gotten pretty good over the past years. I played an out of the box 50s classic vibe strat and was pretty impressed.
I've been wanting a Classic Vibe. They are nice looking.
@@JayceAllanGuitar I ordered the sunburst debut strat and amazon delivered it today. For $119.00 it plays well and I am really impressed.I like the matt look as vintage strats were finished in nitro which gives it the vintage look.
I bought the entry-level Kramer Focus VT-211S a year and a half ago. I bought it from a reputable dealer for $149. I had a buzz in the low E. They fixed the problem. I've seen the overstock price for $109 at the same dealer and now it went up to $199. I would pay a little more and let them set it up for free if it's for a beginner. For me, I can mod it myself. It was the point for them to fix the guitar that played differently than the floor model I played.
Taking a page out of the car makers playbook. They start with a cheap entry model, then over the years morph it into something bigger and more expensive, and introduce a new entry level model at the old price point. That's why a Debut is priced where Affinity used to be, Affinity where CV used to be , CV where MIM used to be, and MIM where USA used be, etc. Rinse and repeat.
Makes sense. Plus, just like car makers, guitar manufacturers know that people think cheap = poor quality and performance and the expensive = high quality and outstanding performance. Which may have been true back when both cars and guitars were made by just a handful of companies by manual labor. But automation has leveled the playing field. So now manufacturers just make multiple tiers of prices just because they know people will pay for a “perceived” increase in quality or performance. When in reality there isn’t much difference between the cheapest Chinese no name guitar and the most expensive Fender or Gibson. About the only thing that you should see is some better components like full sized pots, higher quality tuners, and maybe better fretwork. But will any of those things translate to better tone? Probably not. Maybe a longer lasting instrument. But the frets, neck, body pickguard etc are all the same. I really want to get an American made Fender then get a couple of my good friends who are amazing guitar players and have them play the same song on all the different levels of guitar and do a blind test. Then do another video where I reveal the result.
I noticed that "Trend" too and had a feeling it wasn't just spontaneous or inflation and the Classic Vibes from the excellent Chinese Yako factory were better than the Indonesian ones today. The "CY" serial number usually means it's going to be made well from my own experience even with Affinities years ago.
I agree . I’ve been playing near 50 years and at no time was there so many budget guitars on the market as there are now ! It’s definitely made the manufacturers step up their game. Great review
I appreciate that thank you.
98% of all guitars need a good set up, right out the box. 3,000 dollar guitars and 300 dollar guitars doesn't matter.
I tend to agree with that. I assume every player is different. Some might like higher string height, some lower.
@@JayceAllanGuitarI was pleasantly surprised to find the setup on the fsr squier sonic bronco I ordered direct from fender was great right out the box...so I ordered a different fsr bronco from guitar center and it wasn't anywhere near as good
Yes and yes. Different climates also are a huge factor.
Every once in awhile you might buy one used where the dude before just happened to like it set up the way you did but yeah 99% of the time everyone of them needs a set up.
Hello Sir if you fretted your chords correctly you'd sound in tune.none of your fingers are placed correctly on your frets.
At around 8:36 you said that they set intonation to harmonic of open string but thats not the case.
open string 12 fret harmonic is always correct as its just the open string tone which you tuned up.
Anyways, cool video,very nice picture quality , what camera and lens are you using ?
cheers
Oh right! I didn't even think of that.
The matte finish on the "Debut" series Squier gives it Highway 1 vibe, IMO. Pretty good looking guitars. I'll leave the playability opinions up to you two guys.
I've been waiting for someone to do a review. I like the look of it as a modding platform, especially the red one
Just keep in mind, it is the 1.6" thick body not the 1.75". They are thinner than a regular Fender.
@@JayceAllanGuitar will Fender pickups fit in it?
@@Yougotadollar I don't know for certain, but they should. Pickups are typically pretty universal.
These look great and sound quite respectable for the price. Get a setup and you are good to go.
A lot of people like the matte neck. It's nicer to play than the sticky neck finish that comes on some "vintage" guitars. Some people also like the matte finish on the body too.
I dig the thin finish on a lot of the acoustics lately. The open pore.
While I'm sure it needs to be intonated, it would be good to check that the nut is cut deep enough. I think that's why it's so out with open chords.
A few others suggested that too. I’m going to order a nut slot file set and give this guitar a full setup.
My experience with cheap, Chinese guitars is with Epiphone. I am left handed and my first electric to learn off of was an Epiphone SG 400 that I got off of Amazon. The electronics left me wanting after a while so I bought some Hot Rodded Humbuckers from Seymour Duncan, got the Pots and Resisters from RT Guitar works in Nashville. I now call it my Red Growler and it is played in the mix with my Strats, Tele, Gibson SG and Les Paul Traditional, it holds it's own too. Excellent guitar with the very long neck.
I'm a big fan of Epi's but they are going up in price lately too!
@@JayceAllanGuitar Yes but still way cheaper than a Gibson SG or Les Paul or a Fender Strat, not made in mexico.
I was fortunate enough to have recently bought an Epi Street Kat at £265 (reduced on Ebay by £50 as an interested looker) and I have to say that if I'd bought it at the original £619 fee, I'd be happy as it's an all round quality Guitar
Some guhs have all the luck eh? 😆
I love a good bargain. I buy a lot of second hand guitars. So many aren't even touched. I've bought guitars from Goodwill (a donation facility) and they still had all the plastic on the pickguards and tuners.
It looks like Squier Sonic Strat FSR or LE. Squier has been producing most of their guitars in Indonesia for years now but I've seen some new ones made in China too.
I had a Purple Classic Vibe made in China much better than the new Indonesian ones. Tone Rider pickups. I regret selling it, that color was a mistake and never seen again.
Great loss. I've heard many times that the Chinese-made Classic Vibe had great pickups. I bought the Squier 40th Anniversary Telecaster Vintage Edition in Dakota Red at a bargain price and I am very pleased with it. The neck is made very well. No sharp frets. Rolled fretboard edges. Nice to the touch satin finish. The only drawback is that muddy neck pickup.
For $120 the question isn't if it comes out of the box properly setup and intonated, but does the inexpensive hardware that it comes with enable it to be intonated
Valid question, but in the case of the Squier, I was able to intonate it. But I did end up upgrading this guitar and did a separate video on that. I will say the neck on the Debut is excellent. I might build a new body for it.
Picked one up myself. Already started modding it.
Keep me posted.
I bought the squier,my headstock also says affinity series.🎉
great demo!
ya i bagged a sunburst model after watching joes film on this model as well...
guitarfetish has a "shorty" bigblock either in brass or steel for these thinner bodied "fender squier" models(i noticed a purist upset in the comments so i had to go there)....
absolutely great fit n finish on mine...no "sharpies" on the sides to cut you....
i noticed in a "big chain" guitar store that on a 1000dollar fender that i checked out needed work cause the sides of the neck was horrible....
some big money units slip by QC...even gibsons do as well...these stores need to address this issue before putting them out for potential customers.....just my pennys worth lol!
I agree. A thousand dollar should be ready to go.
I got the 2 tone sunburst one. Over all, very impressed with everything except the electronics. That's ok, though, because I have a loaded pickguard with alnico v pickups and upgraded pots and wires. I also have a spare set of locking tuners I'll probably put on it.
One thing I like; Cheap Squiers typically have the fat 70s headstock with 2 string trees, but I like the classic look of this one with the smaller headstock and single string tree. Once all the upgrades are done, it should be as playable as my Affinity Strats. Obviously it's not on the level of my Fender Standard.
Yeah the stock pickups are pretty thin sounding
@@JayceAllanGuitar That's why I love how modular Strats are.
@@christopheraaron8299 And most stuff fits too.
I own a Fender Ultra Telecaster. It needed a full set up when I bought it.
Beginner here! … How do I know if mine needs a set-up?
@@GG-jw8pt a properly set up guitar is easier to play. The strings don't buzz, they aren't high from the fret board, the picks ups are correctly distanced from the strings, and it's intonated so the notes stay in tune at all positions on the fretboard. MOST guitars will need a set up, unless it was done at the store before you bought one. Even the best guitars could need set-up work doing as humidity changes and transit can affect them.
@@AuramiteEX
Cheers mate! 👍🏴
The intonation should be spot-on had it _really_ been set-up with the 12th-fret harmonics; If the _fretted_ note at the 12th fret is too high, the string's saddle needs to be moved further back (and forward when it's too low), until both the fretted and the harmonic note at the 12th fret are equally in tune as per tuner 🙂
Thank you.
@@JayceAllanGuitar - You're welcome! 😊
For just a little bit more you can own a Firefly. Much better guitar. Also packaged the correct way.
They have a lot of issues.
For less money one could by several guitars that are as good or better.
@popsfereal3192 They seem to be hit or miss. I've seen some folks complaining about quality in some of the discussion groups, but the one I got (FFST) is absolutely amazing.
Not a bad guitar,but for $196 you can get a Firefly FFST with locking tuners,full size electronics, bone nut and stainless steel frets. Things that take the playing experience to the next level.
Lol😂 and you'll have to learn how to work on them too
It would help,if we all learned basic physics. 12 th fret harmonics is an accurate way to measure length for intonation not fretting. String action is usually the cause of intonation being high, the more you stretch a string the higher the pitch.
I just got a nut slot file set, so I'm going to do a video on a setup for this guitar, see if I can't get it playing better.
If they’re making white color I would definitely buy them I never saw a Squier this cheap (used doesn’t count)
I have owned quite a few squier bullets for $169 and they were pretty good for the price.
I played a 1965 Gibson es335 for a number of years in the 70'&80's. Great guitar! Unfortunately I no longer have it. They are completely out of range for me now. I bought a Harley Benton copy and it is fantastic is it exactly like the Gibson of course not but it's not that far off either. I then ordered a redid guitar off of Amazon because I had a $100 coupon I was able to buy the redid guitar for $69.00 and it is as good as the Harley Benton. Both sound fantastic. I also bought a Leo Jaymz telecaster for 150, and it is surprisingly good. So the problem for fender will not be in the lowest entry level guitar market but in the next 1 or 2 steps higher where CNC manufacturing has level the playing field in initial quality. Chinese and other Asian builders are making $200 dollar guitars that sound and play way above their punching weight. I was a fender and Gibson kind of guy but I can't afford that anymore.
Your story seems to be common nowadays. We all like to play and collect guitars but when a US made Fender is pushing closer to $2000 and Gibsons are well above that cost, even Epiphones are getting up there, these inexpensive Asian made guitars really fit the bill. I’m very impressed by guitars $200 and under.
@@JayceAllanGuitar I have made some killer telecasters by modding bullet guitars. I put quarter pound pickups and twisted pickups in them and they just play!!!
Nice review! Thanks for giving Joe credit for finding the deal. He's a nice guy and a master at finding great deals on guitars!
It was cool that you were part of the live stream on Joe's channel today! 👍
@@toddr2375 Yeah that was fun. I dig his channel. He's fun to watch.
@@JayceAllanGuitar I agree. I like the more grassroots channels like his. I got tired of guys like Darrell Braun making Glarrys sound like high-end Fenders, with all of the overdone post-production... I only recently found your channel, and subscribed after watching the 1st video. 🙂
I dig Darrell, but some of his guitars are way beyond my budget. But he's a fabulous guitar player. I try to give the "average" guitar player's perspective. I'm not an amazing player, just a noodeler, but I love guitars. Just love em. I just find it fun to play them and talk about them. I appreciate you tuning in.
The ball end frets are precut and one length it is very cheap. The standard length is why they are either to long, to short or just right.
I have a couple guitars with the ball end frets, ans they are sized pretty well. There's a very slight wave on one of the guitars, but nothing dramatic.
Now that you did the review can i buy it from you theý did not sell them on Amazon in Canada so we didn't only knew abt them from your review.
I upgraded it. It's not stock anymore, but I'd be willing to sell it if you're actually serious.
As You are a Bass Player : Any Chance you will do a review of the Squier Debut PBass?
I actually play bass in a bar band. I’m not great at it. I had no idea there was a Debut bass. I’ll see if I can get my hands on one.
With a few mods and work you'd have a decent dive bar axe... Go ahead Sparky! Throw that beer at me.. I don't care...lol
Kind of how I feel about cheap guitars. I'd never worry about someone walking off with a $100 Chinese made guitar...an American made Fender Strat however? That would grow legs pretty fast.
No Locking Tuners?! You see: "That's how they getcha...".
I bought one and it's Mexico, not China. I also bought a firefly and got rid of it. It didn't hold up. With the squire, I upgraded it with a loaded pick guard with alnico pickups, 250K pods. It was only $40. Other than the tuners it plays just like a fender. So all in all, $150 in it and plays great. You get what you pay for but all in all, better bet.
That would be…a different guitar than this
Are you sure it was made in Mexico and it was this one on sale on Amazon.
This one is definitely made in China, says so on the back of the headstock. I can't imagine why a Firefly wouldn't hold up, unless it was one of the older models. The ones released in the last year are pretty amazing. I think I'm going to do a video on upgrading this Debut.
@@sunnohh some were made in mexico, like in the 90s. I see a few on eBay.
Cheap, asian and name branded, yes. For 30 years now. Started with japanese Jacksons, korean B.C.Riches and such. Predecessor of Thomann (Roadstar mailorder) sold those in the early 90s. Of the big players only Gibson and ESP spare their brand name for western models. Today even japanese guitars (like Ibanez) and indonesian guitars (like Solar, Samick), which started as cheapo factories themselves, get cheaper chinese versions. Marshalls are from Vietnam, Laneys are from China.
The airbags in a BMW are from Japan, my old Mercedes is from Brasil, Grundig TVs are now made in Turkey, Volkswagens are made in China, Harley Davidsons are built in Thailand, Brasil and India...Saab is a chinese brand now...we sold out all our brands and are wondering why we are living in a post industrial wasteland full of dying villages and homeless people.
A little late for the video title one could think...
If the 12th fret is equal to open string, and yet it is not intonated with the rest of the neck, doesn't this mean there's something wrong with frets? Is the nut not low enough?
Also, how are people supposed to clean maple necks if there is no finish on them?
Answer to your first question is “maybe”. There are a few different things that effect tuning. If you have the proper intonation and notes are equal at the 1st and 12th frets then check nut slot depth. If the string height is too high when the notes are fretted it can bend the string and cause the note to go sharp. If that isn’t the problem then check the fret measurements and make sure they are correct. If the frets were set at the incorrect distances then your guitar will never intonate. Second comment: I agree. I think with a lot of playing the oils from your hands would get into the wood.
@@JayceAllanGuitar Years ago, I used to get gunky necks on my acoustic guitars from my sweat. That doesn't happen anymore. It's probably because I don't press as hard. Once in a while I'll notice a touch of grey discolouration on the neck of my Affinity tele, and it wipes off with a damp cloth. I hated the thing you used to get on Fender maple necks, where because of poor sealing, the moisture would get into the wood, and turn it black. Of course people loved that because it was "vintage".
@@martymcfly1776 Yuk. I’ve never owned any one guitar long enough to get worn like that. Longest guitar I’ve owned in my Eastman acoustic since about 2015 I think, so almost ten years. Gets a sweat line where my arm rests on the body but cleans off easily. That guitar has matte, open pore finish.
Much more guitar for the money when you buy the budget brands
I couldn’t agree more
If you search for the Squier Mass Market guitar, I think this Debut range are a spin-off of those. Aimed at chain stores and less wealthy countries. They had 22 frets but both look like they are made by Muse in China. CM serial? Google tells me Muse are a Korean company with factories in China. Used to make the Epiphones before Gibson started their own Chinese factory. Also make the Squier Contemporary series. How heavy is this guitar? Is it poplar? The MM ones have paulownia in the online spec. Regarding the intonation, if your open chords are slightly out it could be the nut slots being too high.
Poplar body, lighter than my Ash and Alder guitars, but not as light as basswood. This one is 21 frets. Nut slots could probably be a tad lower, but overall it definitely needs to be intonated. I'm going to order a set of nut slot files tonight.
All Fender parts fit with the exception of a full length sustain block.
Good to know. I think you can still use the full length sustain block but it sticks out a bit. I suppose if you have a hack saw you could cut it down! LOL
Maybe I don't understand the concept of intonation but if the guitar is in tune the low G on the E string should be G. Move up the neck to the next G on the E string won't be. From what I understand of intonation the open chords on the first position shouldn't be affected hardly at all.
Intonation is shortening or lengthening the scale length in order to make each note on each fret the correct pitch. Every note on every string up and down the neck should be in tune. But yes, if intonation is off, the notes can be more out of tune the further you go up the neck.
@@JayceAllanGuitar That's what I thought. My point is that if the G at the 3rd fret is off it is so close to the nut that the problem is far more likely the string being out of tune than intonation. At the 15th fret then yes, assuming the string is in tune it is certainly intonation but at the 3rd fret I'd bet more on a tuning issue.
Ah, got ya. That could be. Yes, usually the further down you go toward the nut, the more in tune it will be and worse as you go toward the bridge.
Your fingers on your fretting hand are not up against the frets it looks like you think your supposed to put your fingers in the middle between frets. If the 12th fret is harmonically correct then its correct and its operator error. Watch your own video and chrck out your fingering, fretting your chords ... No offense just a headsup
Thanks. My playing is definitely sloppy but this guitar was certainly out of intonation. I did a separate video showing the setup and it sounds a lot better. Thanks for the comment.
May I also add to this "heads-up" that the Low E-string is meant to be _silent_ when playing a D chord?
😊👍
Fretboard radius? The only thing that will entice me now is a 7.25 radius just to see if I'll like it. EART seems to be the only cheap option.
Okay, a toober in another video said it has a 9.5 radius.
Yes, 9.5" Did I say 7.25" somewhere in the video? If I did I misspoke. The video description say 9.5" and my gauge measures 9.5".
No, you didn't say it was 7.25. I was just saying I'm interested in trying out a guitar with a 7.25 radius. I have a Cort with a 9.5 radius so it would be a bit redundant.
Ah. Got it. I’m not aware of too many off brand guitars with the 7.25” radius. I think you’d need to go with a vintage style like maybe the Vintera?
Prettysmart by fender, cutting out all dealers by going over amazon only, and let them distribute the product which saves on margin as well. Not surprised they can offer it at that price.
Why is everyone getting the red one? They come in matte black and matte sunburst.
I just thought it looked sharp. I've owned a ton of sunburst strats!
Well, I'll say this, you got a nice box.
Is that code for something! LOL
sounds like it could be the nut. put a capo on it then tune it, if it sounds better very likely the nut us cut bad.
Yeah the nut slots aren't deep enough in my opinion.
@@bigbasil1908 Frankly, my $750 Fender American Special intonated much the same straight out of the box. So much for USA QC.
Just a sealer coat on Squier necks.
can't find it, please send me the browser info so I can find it. Thx
amzn.to/3TPYcup
Thanks.
Intonation and the nut is probably slotted a bit too high.
Yeah. Check out my channel. I did a follow up video where I set the intonation and filed the slots. Plays way better now.
It needs a major setup.
Definitely. I'll try to tackle that tomorrow and do a follow up video.
I reckon the nut slots aren't deep enough, making it play sharp.
Someone else mentioned that also. I'm going to get a file set and file them out. I think I'm definitely going to do a video on setting this up.
@@JayceAllanGuitar I have some hofner shorty guitars and each one of them plays
sharp on the first three or so frets because the nut slots aren't deep enough. I haven't gotten around to sorting them out yet because the plastic nuts that are on them seem awkward to file, as opposed to bone nuts which would be a lot more simple to file. Because they are plastic, I don't get dust come off when using the nut file. I will get round to it in the end though, and I plan on eventually replacing all the nuts with either brass or bone. It seems certain guitar manufacturers don't bother to properly set up the guitar, and if you're buying from an online only store, they won't set them up properly either unfortunatey.
Interesting. I have never messed with nut slot depth, but I always tend to go sharp on open strings and chords closer to the nut. I always thought it was operator error, like I smashed on the frets too hard. But I think this might be my solution.
@@JayceAllanGuitar I've had a japanese squier strat since 1994 and that thing never plays sharp. But it was from a proper shop who had set the thing up. These days we often will buy a guitar from an online store, and unless those online stores are an extension of physical shops, the guitars won't be set up at all - or will be in factory condition, so it will depend on the factory if it has been set up or not. A lot of guitars are sold and are pieces of s**t only because they have not had a proper set up.
I have a pretty looking ibanez electro acoustic that plays perfectly and is set up, which I also got from a physical shop - I had a go of the guitar and just wanted it to be mine.
I have 3 hofner shorties and a hofner shorty bass that are not set up and the nut slots are too high on all 4. They play sharp and there is fret buzz on all 4 guitars lol. I will get round to setting them up.
Terrible guitars from the factory but set up they are quite decent instruments
@@JayceAllanGuitar The only time the strings should go sharp when fretted is with scalloped fretboards in my opinion. On a normal fretboard you should be able to hold the strings down firmly and be perfectly in tune.
It took me quite a while to figure out its the nut slots, but I finally got it through watching a few twoodfrd guitar repair videos (he's really good)
Squier has been selling been selling cheap chinese guitars for decades. The longest run was the bullet series.
Okay, I thought the Squiers were all Korean made or something like that, didn't know they had a line made in China. This one is just kind of an oddball because it just appeared out of nowhere on Amazon and is only $119. Do they still make the bullet?
@@JayceAllanGuitarThe sonic series replaced the bullet series
Do you know what the radius is?
9-1/2"
Can't wait to get mine. I'm gonna upgrade it with $2000 worth of mods ... it's gonna sound better than a $1000 Fender !!!
🤣😂
It would have been a good idea to add the intonation right away incase some kid got one
I agree. It should be ready to play out of the box.
Average Joe has a really good channel. Interesting what you mention about moding. Always wonder when prople say that the budget guitars are great for modding. Where do u go for parts that will fit in budget guitars? A guitar case can cost more than a guitar these days. Lol
I've only ever changed out pickups. I know some folks will update the trem block to the bigger version and maybe change tuners to locking variety. You can find parts on Amazon of course, Guitar Fetish or Stewart MacDonald. Loaded pick guards are an easy upgrade.
@@JayceAllanGuitar I appreciate the reply. I have heard that on the loaded pick guards the screw don’t always lone up. I would feel uncomfortable drilling into my guitar. Lol
Yes, that can be an issue. Some are 9 screw, some are 11, I think.
@@kennyg63 I would drill into a $100 guitar in a minute. A $1000 one, not so fast.
@@davidsteinberg8024 Lol
Looks like a mini. Shorter Neck?
Nope. Standard scale length. 25-1/2”
@@JayceAllanGuitar 👍
Thanks for the review. I get what squier is trying to do, but there are better guitars out there for less and you get more. I bought a Donner DTS 200 for $109 and it came with a gig bag, a cable, strap, and a capo. Don’t get me wrong all those things were on the cheaper side but it’s a better value and the guitar is better quality and features. I have 9 squiers. Some standard, classic vibes. I bought those used.
I would have to agree. I've played the Firefly brand which has been amazing, but a bit more money. The Harley Benton's I have played were very good. I also high recommend the Donner brand also. I've owned a few and they're great guitars. Also, eBay is a surprisingly good resource for refurbished or returned guitars for Donner.
Great information but you keep going in and out of whispering. Hard to understand sometimes. Thank you!
Thanks. I’ve noticed that sometimes while editing. I should increase the volume on those parts. Not sure why I do that.
@@JayceAllanGuitar You have really good helpful info. Helped me a lot. Thank you.
@@johnlew5972 No problem, thanks for watching.
That's a shame about the intonation.. mine was pretty close out of the box
Good to hear it. I did a setup on it, and shot a video for it. It sounds much better now.
The cnc machines in China are the same as in America.
The CNC machines themselves are all made in China! 😜
Set up is gonna cost more than guitar
Yeah, probably if you take it somewhere, but if you find a tutorial on YT it's not so far out of whack that a person couldn't do it themselves.
How's the trem?
Seems okay. It didn't act like it wanted to screw in very far, like a couple turns and it was already tight, that doesn't seem normal to me. It functions as it should though, I won't know about tuning stability until I get it intonated.
$119 is way too cheap. I thought the Jackson minions were crazy cheap for great guitars, but this is really pushing the envelope... you have to wonder what's really going on when you have a behemoth like Fender competing with tiny no name chinese companies in a race to the bottom... THAT CAN'T BE GOOD...
Kind of what I thought, but then someone told me that these are guitars they market in India, so maybe they were just trying to get rid of inventory. Will be interesting to see if they sell more on Amazon.
Hey, you and I and everyone else knew the intonation would be bad. For your next video, stop at that point and set it up and explain that it’s a solid 75 bones to take it to a tech.
Then keep playing, just my opinion
I think so. I get so many comments about how out of tune the guitar is, so I think you're right. I'll stop, take it to the bench and do a quick setup, even if I add it to the video as a time lapse, then come back and show how it plays with proper intonation. Then I don't need to make a separate follow up video.
I didnt think the pickups sounded all that great. Not the worst but not great.
Yeah, they're a but thin.
I think Fender is making this for many major reasons of which is based on my opinion , so who would buy this, a broke ,& down on his luck musician, ? no, so who would buy this? why is fender pricing it so low? is fender doing this to corner the cheap China knock off market? maybe... I think the people that would buy this are people who don't take learning to play seriously ,& are not that committed to the time ,& the years it takes to get good, so it's intended for the non pro hobbyist . Real professionals who are committed to wanting to play won't buy this.. For a few extra bucks we could get a better Fender Squier the Squier line is very affordable even at 300 bucks..
I think the target audience is for those hobbyists
Well it’s obviously not for the pro and doesn’t try to pass itself off as a pro guitar. It’d be a great guitar for a beginner or someone that just likes to sit in their basement studio and noodle around. Not all guitar players aspire to be a pro or to even play in front of people. And yes, not everyone has hundreds of dollars to invest in a guitar, which they may consider a frivolous purchase. So to answer your question, lots of people would buy one. I did.
If the intonation is off then this not a guitar it is just a noise maker. Money well spent I guess.
Turns out that the technology to fix intonation on an electric guitar is available to the public these days.
@@SDCromwell Awhile ago Sean at Scar My Guitar got in a guitar that couldn't be intonated the way it was. He had to mill out the bridge cavity and set the bridge back further.
@@SDCromwell I once owned a "Vintage" V6 Strat copy, and its bridge was so far out I had to plug the 6 holes and re-drill them to move it several millimetres before it would intonate.
@@timmooney7528 I've had a couple guitars that way, where you couldn't move the saddles back far enough. Luckily I ended up taking the springs out and cutting them. Then it worked, but if the scale length isn't right, or worse, if the frets aren't spaced correctly, then no amount of adjusting the saddles will fix it.
@@1man1guitarletsgo That sucks. I own one of those too, and it was a pretty nice guitar. I think quality varies on these brands because they probably use a handful of different plants in China to meet demand, and quality varies from one to the other.
set it up...
Yup, I did, video is forthcoming. It's almost an hour long so I need to find the time to watch it again and make sure it's all good. Hope to post it this weekend.
Chinese made Squier? Nothing new there.
Fair enough.
A squier this good when I was a kid would have cost $200 in 2005 money, if anyone ever tells you inflation is bad laugh in their face.
Agreed. Looks like the cheapest Squier on Fender's website is $199.
That's a ridiculously stupid statement.
@@jasonodell79er Which?
Junk. 😂 Fender and Gibson likes to feed us their slop and table scraps ( Epiphone, some Squier models)
You mileage may vary.
Epiphone has upped their game in the last 5 years or so. Check out the specs on the 59 re-issue Les Paul with Gibson Burstbucker pickups, CTS pots with 59 wiring, and Switchcraft 3-way. Mine plays slightly better than my Gibson, due to the more comfortable neck. That's not the only example of Epiphone's current quality, and it's much more consistent than Squier.
I have to admit, at this price I'm toying with the idea of getting this Squier. Going to mull it over for a bit.
For sure. Epi has become better than Gibson. I'm eyeing those Inspired By Gibson Custom Les Pauls. Pretty nice looking. But Gibson has to do something to make their guitars more affordable. The manufacturers have learned the same thing car companies learned, you need a range of products that cover all price points.
Cant suck any more than an Affinity
I called Fender a few months ago and told them that if I pay $2100 a Fender Strat I am offended that someone can call their Squire a Fender Squire. I also said I
will not buy another Fender guitar. Squire guitars are NOT Fenders!
I don't care about the name brand or the price. If I play a guitar and it feels good in the hand and plays well I will buy it. With that said, I have played Squiers that played as good as an expensive American Strat. I have even played custom shop Strats that were nothing to write home about, and some that were amazing. The bad ones and the good ones still had the same price tag. On a separate note, I buy Toyota cars because they are better than any American car. That is the only "brand" product that I stand by. Have a nice day.
Some older squires were made in mexico, same factory that makes fenders. Only real difference was that fenders came with nicer hardware. As far playability, they sound the same if they both used the same hardware. They both hold their value very well, fenders usually can go for more if it were parted out. I would just practice on the cheap stuff, then buy the expensive ones when you are good enough to tell the difference. Probably won't big a big difference from what people say.
Is this the golden era of cheap guitars ? Maybe. Is it the golden era of CZcamsrs getting rich claiming every new budget guitar sent to them is the greatest guitar ever made ? Absolutely !!!
This guitar is a literal toy, it's a joke, it's beginning to look like it's Amazon's house brand, Best Choice Guitars with a different paint job and the Squire logo slapped on them. Anyone promoting these guitars as anything but pure junk... You need to take everything that the CZcamsr says with a grain of salt.
AHHHHHHAHAHAHAHAA. You're hilarious. Rich! LOL. Thanks for that laugh. Wow. I spent $120 or so on this guitar from Amazon (no one gave it to me). In fact I own a total of one guitars that were given to me by a vendor. My channel has just over 500 subscribers, so I'm not even monetized yet. The one channel I run that is monetized (not guitar reviews) is raking in a whopping $1200 to $2000 a month! If I had the subscribers that Spectre Sound Studios has, then I might be "rich". But there a lot of variables when it comes to how much you make. But hey, thanks for the comment.
@@JayceAllanGuitar Just about every amature woodworker has a CNC in their shop, making a good guitar body and neck is only as difficult as it is to program a CNC machine, It's the rest of the guitar that is the issue.
Sure you can play a $100 guitar, that doesn't mean it's enjoyable or good for someone just learning to play. For $100 more people could get a Yamaha Pacifica that is literally in a different universe than these budget guitars and it would set them up for a much better learning experience and path forward... You know this thing is crap, how many dreams do you want to destroy by claiming it's not ?
So you're going from me getting rich making CZcams content to me destroying dreams. Now THAT'S what I call rich! I've played the Pacifica, they're a decent guitar, but at the $0 - $300 (or even $400) price points, you're not going to see a ton of difference in quality or even tone. So let me ask you something, have you actually played the debut? Or are you just making assumptions? Other than the lack of setup on the Debut, it's a decent guitar. I would have been completely happy to have a guitar that good when I started learning. The few Pacifica's that I've played I wasn't impressed with. For the price, they should be better than they are, so why spend more money on a guitar that is basically the same as the Squier Debut or any of the other cheap guitars? You won't agree with me anyway, but you seem to think that I'm some snake oil salesman getting rich off promoting cheap guitars at the expense of beginning guitar players. Which is hilarious because there's no incentive for me to promote these guitars. I get nothing for it. My channel makes 0 dollars. I buy all the gear I review with my own money. I'm trying to give people an honest picture of what they can expect if they choose to buy one. I love how people like you rush to the comments all in a yank, and none of you have put the time in to create a channel and publish your own reviews. So much easier to criticize other people's efforts. At the end of the day, I don't care what you do, buy one, don't buy one. It's your choice. I'm going to continue to make content about all sorts of guitars from cheap to expensive. The people that find value in the content will continue to tune in and I'm sure the people like you that just want to complain about everything will always be here as well. Makes me want to buy a Pacifica now and compare it to this Squier.
@@JayceAllanGuitar I quit playing guitar when I was a kid because of these cheap guitars, I don't want to see that happen to others.
I'm all for low cost guitars but not cheap guitars, and that's exactly what these Amazon specials are, cheap guitars. But we will see, maybe in 35 years from now the Amazon Squire Debut will be in literally every guitar shop and be one of the number one recommended budget friendly guitar that punches well above it's price point... Like a Pacifica.
As for the rest of your comment, Squire Affinity, Peavey Raptor plus, Yamaha Pacifica, the Ibanez ... There are lot's of companies that make lower cost guitars.
These are what you should be promoting, not these toys designed for no other reason than to extract money from peoples wallets.
Anyway, Good luck with your channel.
@@tr-lj2vx Again, unless you've actually held this guitar physically in your hands, you have no idea what you're talking about. You're just making assumptions. For people that are on very tight budgets, and surprise, surprise, not everyone is a "rich" CZcamsr like me, another $100 could be the difference between getting a guitar and not getting one. I too got frustrated by my first guitar, a 3/4 size Harmony with action 10 feet tall. I hated playing on that guitar. All the cheap guitars I review would be more than suitable for a beginner. And I am always very clear about whether a guitar will need work or not. Again, easy for you to cast stones, since you have nothing to lose. You just call this guitar junk and a toy, and go about your merry way. I have played a ton of guitars in price points from $50 to $2500 and this guitar is a very solid and usable guitar. I suspect your complaint is more about the country these guitars are made in and less about the guitar itself.
These are pretty trash. The warranty isn't worth the paper its printed on. Fender is notorious for not honoring their warranty, even on their top of the line instruments.
Lame review.
I'm sure your review is much better.
The PUPs do not sound good
They’re really thin.