[@muddaserrazzaq3225]

sir answer of 6th mcq is c not c&d because the formula that you used to satisfy option d is wrong a= z* 0.7 is the correct relation

[@nitinhadawale7063]

Correct

[@maqsoodalam4290]

Right, this is also my query 👍

[@alimustafa2615]

yes

[@mohammedsohail7439]

Both c and d are satisfied bcz .
In a triangle all 3 sides are equal.
So, from that point of view.
Distance from root to toe =leg length.
It is making an angle of 45°.(Acute angel).

[@mohamedmamdouh1443]

CORRECT

[@BTSARMY-xz3hw]

Lots of hat god apki hmesha sari manokamnaye poori krta rhen
kitni mehnat ki hogi apne ye sb video bnane k liye imagine bhi nhi kiya ja sakta

[@WeldingandNDT]

Thank you so much

[@avitsalutigikar5981]

Great job love your hard work best welding channel on CZcams till now

[@WeldingandNDT]

Thank you

[@kantidhuva1114]

Thank you very much sir & keep uploading videos of CSWIP..

[@zahidalimuhammad948]

Thank you very much for your time, I am watching all your videos very carefully and hoping it will be a great experience for me. Pakistan

[@AllahDitta-co8pg]

Best of luck fantastic method of teaching

[@talhajawad9396]

respect from Pakistan...
hats off
good job sir.
May Allah help you as you are helping the students.
stay blessed.

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@jesusinternational6204]

I like your all videos

[@mohammadamzadhossain1411]

Great job & help full session .
Q 31, Ans : D

[@sudhisnair5617]

Super ...goahead sir

[@manjunathsk6467]

Thank you so much for sharing your knowledge. God bless you sir

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@prasadkalaga7399]

I am waiting sir..

[@sudhisnair5617]

Waiting sir..

[@waheedkhan3854]

Bht acha sir...

[@razalam1022]

Amazing sir you are no 1 on CZcams I like they way you teach very clearly thank you so much

[@WeldingandNDT]

So nice of you

[@AnilKumar-sc6mz]

Really hard work.

[@nasiryaqoob842]

Very informative video. God Job. Thanks

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@Bkbangera]

I am waiting.....

[@dawoodkhan1713]

SIR PLEASE COMPLETE THIS CSWIP COURSE AS SOON AS POSSIBLE. I AM LEARNING FROM YOUR VIDEOS AND I ALSO HAVE JOB OPPORTUNITY THIS NOVEMBER 2020. SO ITS A KIND REQUEST TO UPLOAD ALL THE CSWIP VIDEOS IN SHORT GAP. PLEASE 🙏 ITS A REQUEST. IT WOULD BE HELPFUL FOR ME.

[@sandeepsingh2932]

Great knowledge sir

[@Arshadali-tc2zu]

Zabrdast... Great

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@birdslovers3507]

Thank you so much for sharing your knowledge sir,,,

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@husseinalrubaee8348]

Good lecture. I benefited from a lot of information .. I wish you continued success

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@venkataramanajanga2951]

Waiting Sir

[@mohan12357]

Well explained sir,

[@amarnaik244]

Very very very nice lecture. Keep it up sir

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@weldingcoatingmechanical4879]

Great lectures sir....thanks for your efforts......😘😘😘

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@jiyaslittleworld9598]

Superb video sir ji nicely explained

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link:
czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@ajitthorat8993]

Great like

[@udayvirsingh3809]

Respected Sir,
Your able guidance is worth appreciation. I am having some queries in context to this lecture. Could you please help us with following questions:
1. Why the Double-V penetration Joint is ideally considered in asymmetrical form and not symmetrical?
2. Could you please elaborate on the reason, why Land is required in Aluminium-alloy and not in other material?
3. Which side should be welded first in asymmetrical joint, 1/3 or 2/3?

[@asifhusain3425]

3. Any side which suitable for you but don't fill completely and start other side in sequence rest of welding on both side complete it one by one

[@nsm5828]

So nice sir...i have learned so much from your video....keep spreading your knowledge to us sir.. thank you so much

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@rehanbashir7215]

Sir chapter 3 Kidr h Nhe mil rhaaa

[@ramendhs]

Thanks sir great work.

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@santoshchauhan6502]

Aap videos continue banaiye sirji... I already watching your full videos..... Question 31 answer-A

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@ImranKhan-sp4wj]

Truly amazing sir

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@tawfikidrissi3785]

Im waiting

[@DhanyaJayani]

Thanks a lot for your Video’s, very clear and informative

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@mahek_shreya_fun5345]

Q 31-Answer-A

[@cswip3.1..9]

Good working huge efforts

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@lokeshmanjhi]

Sir, please explain about Overlay welding in your style..

[@abdullaar3590]

Waiting

[@KristecBabu]

Nice lecture.
If in English, it would be still better.
Keep it up. 👍

[@vigneshmanoharan9837]

very excellent lecture and very useful for me

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@kuldeeptyagi5133]

Too good please continue
All concecpt full cleat

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link:czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@yusufk311]

Thank you so much sir & love u sir..

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@ahmedbahaa2134]

Thank you for your time 😘

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@mohdfaisalraja]

46:00 me Sir double U ka depth v 2/3 aur 1/3 hoga ya 1/2 aur 1/2 hoga

[@kantidhuva1114]

Very useful videos..

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@dallinareshreddy6778]

Thank you sir

[@hunainpiyari8097]

U r great sir.

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@ArunKumar-fj6zp]

Very good lecturer

[@hunainpiyari8097]

I am waiting for the next chapter

[@mahmudulkabir7893]

This video is very helpfull.

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@learntoearn9935]

Good work sir..!

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@anandthota]

Thanks sir great work

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@mirzasajid3195]

Very good explanation ⚘

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@sabariloves5000]

thankyou.very help ful..please upload Mig mag welding process

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@jsinghdhanoa]

EXCELLENT

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@Jeetu9982]

Sir you are legend

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@keeplearning4370]

appreciated

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@shoaibakram1594]

Nice video.... Thnx sir...

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@mdfirdous559]

Thank u very much 👍

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@md.monjurulhaque4872]

Thank you so much sir....

[@WeldingandNDT]

Thank you. Please join my channel to watch all videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@asadtikka984]

Good job sir g...

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@geyasuddinahmad7943]

Excellent sir

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@dheerajkumarchaurasia2256]

Thank you sir.

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@borunkumarbiswas2013]

(31) A
Thanks sir. You are helping us alot.. please make videos for API Pressure vessel and pipelines inspection.

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@amiralam1786]

op sir ek dm mst

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@ashumate9419]

Good job sir

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@debumandal796]

VERY GOOD LECTURE

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@hasanraza9520]

Excellent bro

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@OPGAMER-yq4tq]

very good lecture,

[@WeldingandNDT]

Thank you

[@riteshpandey2782]

Thanks sir love you❤❤❤❤

[@WeldingandNDT]

Thank you so much

[@jobitjohnson8861]

Sir, good video

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@rajakulasekaran6158]

Thank you sir, also please post this welding inspector training in English...

[@WeldingandNDT]

English version is also available on my channel. Please check into the playlist. Thank you. Please join my channel to support my initiative. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@mohsingogly6779]

Sir u great

[@WeldingandNDT]

Thank you. Please join my channel. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@ruchitpatel6002]

Sir, at 48.10 , its Crevice corrosion. Not service corrosion. Is it true?

[@perfumeparadise4432]

thank you sir.... I have learned a lot...

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@seshadrip7357]

Thank you so much ❤ sir...

[@seshadrip7357]

Sir please do cswip.....ch-4 sir

[@shoaib_nisar]

❤️

[@rizwanijaz521]

Thanks from Pakistan u are Good. Waiting for next video. Ans for 31 is A.

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@muhammadasad5928]

Good explaination

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@AhmadAli-zj1uv]

31 . D answer . Very helpful videos sirr keep it upp.

[@WeldingandNDT]

Thank you. Please join my channel to watch the members-only exclusive videos. Here is the link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@sandipsaha8447]

31. Answer A. Welding from both sides.

[@abdussamad4795]

Thank u sir

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@jesusinternational6204]

Plz sir you discuss qc department course level 2 k liye

[@suranjankhatoi1652]

Ans-D

[@shantimoyghosh9985]

1:00:19 MCQ questions

[@junaidiqbal5772]

Nice lecture

[@WeldingandNDT]

Thank you. Please join my channel to watch the members-only exclusive videos. Here is the link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin

[@amitrokde5802]

Q.31 answer Option no. -b

[@sadabsiddiqui9906]

Question no :- 31 ans:-B ( using U prep rather than V prep

[@thukarambatte9856]

for Question.no.31, answer is Back step welding technique .

[@mohammedazizgena4169]

Q 31 . answer A . welding from both sides

[@hammadakram6024]

A. Welding from bout sides

[@ruchitpatel6002]

Butt weld or groove weld? Isn't butt a joint only? Plz clarify

[@Srinivas-sp1fv]

Q: 31 answer is D

[@pbharathdme]

18. B permanent backing strip
31. C Using strong backs

[@muddaserrazzaq3225]

not sting bavks
but correct anser is to use back step welding you can't use songback on thin plate

[@Rohitkumar-rg5ju]

sir mai ek baar channel join kiya phir uske baad automatic ammount deduct ho jata hai aise kyon

[@muhammadyasir4761]

very informative video, thank you. answer for the 31 question is welding both sides

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@rajukoolguy]

C. Using strong backs

[@waheedkhan3854]

Sir series aagy chalaye

[@WeldingandNDT]

Ye series complete ho gaya hai. Playlist link czcams.com/play/PLZyz5C7MAALyDagM6yQfU_fpmoIEDkJn9.html

[@suranjankhatoi1652]

Good

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: czcams.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin