Hi Tevz, I like to use a 60W incandescent light bulb in series with the mains power to prevent fireworks. I actually have 3 bulbs which I switch on with individual switches to increase or decrease the line resistance. I can send you a photo of it if you are interested..
Excellent work!! I hope you did not take my comment on the other video about using more flux, as bad. I meant no insult saying that, I was just trying to help improve solder flow and solder joint stability.
Hi friend.would you tell what is the watt of the large 120 ohm resistor that you use for to be sure there is a short component or not? And the second question is how do you know which ic belongs to which part of tv? Please guide me to learn it. Thanks a lot.
I injoy your videos. I have a 70 inch sharp tv model number LC 70LE660U. The tv turns on the back lights but won't turn them off. I have no picture just the blue screen from the back lights being on. I was wondering if you have ran across this problem.
The main reason there is no output of the LED driver is VCC 16 volt in the PWM which is present, and the mosfet is ok, so I decided to first replace the PWM.
i ask sir what is the problem in the screen when watching t.v theirs a box blinking with red letters down the lefh side of the screen what is the wrong of this hope you make a video about this kind of trouble thank you. thd
master Tevs hindi ba puputok agad ang pesa pag series resistor lang ng 220 ohm hindi ko pa kasi na try ! series bulb lang kasi gamit ko lagi paghindi ako sure
Your show is very professional and your English is clear thank you
I truly appreciate the help you give technicians like myself.
Thanks for your appreciation.
Dear friend, your way of expressing yourself makes it seem so easy to spot equipment failure. Thank you for sharing your teaching. 👏🙏🙋♂️
You are very welcome
Thank you for this usefully information.
Every new video gives helpfully for us .
Keep on sharing Tevz. I truly like the way you explain. Explaining even how mosfet works. Your style is good for beginners and pros. Tyvm
I appreciate that!
sir exelint information video ap great techer ho
Keep watching
Special thanks for your good training course about repair led tv modules
You are welcome
Great troubleshooting skills sir 👍
Thanks for the videos. I'm learning so much and they are so much fun to watch.
Glad you like them!
Always watching Sir
Thank you sir
good job
Galing mo talaga Tevs
You good
You are the best 💖
Super
Nice one
Thanks 🔥
Hi Tevz, I like to use a 60W incandescent light bulb in series with the mains power to prevent fireworks. I actually have 3 bulbs which I switch on with individual switches to increase or decrease the line resistance. I can send you a photo of it if you are interested..
incandescent light bulb is ok. Also resistor is ok.
@@tevzTVTevatronics incandescent light bulb looks better instead of the resistor, because if you got the short circuit - you can see this. :)
Send me too
Que o senhor nosso Deus abençoe sempre você e sua família
Nice work. Thank you.
Thank you very much
merci beaucoup
Thank you too.
Best work.
Thx for sharing
❤ thank you sir ❤
Oke good joob👍👍👍
Thank you for sharing your knowledge 🥰
You are so welcome
thanks 👍👍👍
Welcome 👍
Excellent work!! I hope you did not take my comment on the other video about using more flux, as bad. I meant no insult saying that, I was just trying to help improve solder flow and solder joint stability.
even no flux will do.
Thanks 👍
Welcome 👍
Happy new year 20223
Good
Bel lavoro
Fun to see but no info on how to solve problem on other TV...
Thankyou!
💕👍❤️
Thank u sir
Welcome
Hi friend.would you tell what is the watt of the large 120 ohm resistor that you use for to be sure there is a short component or not?
And the second question is how do you know which ic belongs to which part of tv?
Please guide me to learn it.
Thanks a lot.
It's 220 ohms 20 watts. you can google the part number, or see the circuit diagram if they are similar.
👍👍👍👍👍👍👍👍👍👍👍
👏👌🙏
Thank u
Welcome
Hola amigo yo tengo un problema con la parte de backligh es de 55 pulgadas no funciona el backligh
Good
Good Good
good afternoon sir please explain Sony led tv 32R 512C stand by led 5 time blinking
👍👍👍
tevz how much do you think is that PWMIC and where i can buy it?
I injoy your videos. I have a 70 inch sharp tv model number LC 70LE660U. The tv turns on the back lights but won't turn them off. I have no picture just the blue screen from the back lights being on. I was wondering if you have ran across this problem.
No display and can't turn it off. Seems it's a different issue. looks like the pane is the problem.
@@tevzTVTevatronics I enjoyed your videos. Have you ever repaired a main board for the shape 70 inch tv
check the panel.
nice explanation ,but how do you know pwm driver ic is faulty .please explain this
The main reason there is no output of the LED driver is VCC 16 volt in the PWM which is present, and the mosfet is ok, so I decided to first replace the PWM.
i ask sir what is the problem in the screen when watching t.v theirs a box blinking with red letters down the lefh side of the screen what is the wrong of this hope you make a video about this kind of trouble thank you.
thd
Benq monitor gw2280 virtual line and off orang lite problem any help
How does the LED drive tested
Hai sir Panasonic 48 inch Madaraborda deda help you sir
Model no TH-49DS630D
How use multimeter digital kin use
how did you know that the pwm ic for the inverter circuit is gone ? ( give method to messure)
master Tevs hindi ba puputok agad ang pesa pag series resistor lang ng 220 ohm hindi ko pa kasi na try ! series bulb lang kasi gamit ko lagi paghindi ako sure
My hisense led tv has no back light help please
SG6848
If voltage dropping
Paano Po kayo makontak sir?
FB page Teve Electronics
@@tevzTVTevatronics Hindi ko mahanap sir.
Special thanks for your good training course about repair led tv modules