Tutorial How To Measure USB Cable Resistance With Fnirsi FNB58?
Vložit
- čas přidán 25. 08. 2024
- In this tutorial, we'll explore the process of measuring USB cable resistance using the Fnirsi FNB58. If you've ever wondered about the quality of your USB cables, this guide will help you understand how to check their resistance for optimal performance. Let's dive into the details together!
Get more information or buy a DROK 25W LD25 USB Load Tester to use in such a test directly from Amazon with this affiliated link to support my channel: amzn.to/3tOYwki
As an Amazon Associate I earn from qualifying purchases, but using this link doesn't have any disadvantages for you.
Hashtags: #USBResistance #FnirsiFNB58 #TechTutorial #Electronics
Disclosure: some of the links provided might include affiliate links and if you use them, it will show your appreciation to my channel and my work and pays for my equipment and help my channel grow - which will again help you. There is absolutely NO disadvantage for you and you will pay absolutely same price as without this link.
As an Amazon Associate I earn from qualifying purchases. Thank you for supporting my channel!
Disclaimer: The information provided on this video is for general purposes only based on my personal experience and are my very personal opinion, trying to help other people and should not be considered as professional advice in any kind. I am not a licensed professional so make sure to consult with your professional consultant in case you need to. All the links I provide in my videos, the description or in my feedback I provide in an effort to help you as good as I can, but I cannot give any warranty on them and hence you are using them on your own risk as I use them on my own risk.
I am not a professional and this video is based on my personal experience and opinions. Please note that I'm not responsible for any potential issues, damages, or consequences resulting from the use of this product. Always refer to the manufacturer's instructions and guidelines. Use any product at your own risk.
~-~~-~~~-~~-~
This is my NEW storefront on Amazon where you can find all my recommended FAVORITE products:
www.amazon.com...
♡ If I've been able to help and you're happy ♡ you can use this link ko-fi.com/allc... to buy me a coffee to help me, to fill up my empty batteries for more (hopefully) helpful videos. Thanks a lot and have a blessed day! ♡
~-~~-~~~-~~-~
For how to measure USB-C to USB-C refer to this video ;-)) czcams.com/video/pVAIrZrZYu8/video.htmlsi=pjPLNFwSGSZ_202s
Great demonstration. Thank you big time 🎉
Thank you for the video, you are wonderful ❤
Glad to know, that I was able to help - thanks for the positive feedback! 💖
Do you have an idea of how to measure the impedance of a usb cable (should be 90ohms)
Sorry that's too much for me ... I'm a normal end user 🤣🤣🤣
Can anyone tell me where I can read on the FNIRSI FNB58 whether a device supports PPS? The device should actually be able to read this, but I can not find it.
Tried with Application / Toolbox / PD listerner and PD switch to the lift side but keeps saying "waiting for something ..." forever and never showed anyhitng. Then tried with the AVHzY CT3+SM-LD-00 (amzn.to/3SfGtwD affiliate link) and showed the PPS of my charger instantly. Sometimes these testers are weird ... really weird ....
@@allcheckout Thanks for you answer. The PS listener is the wrong tool for this. To use the listener you need 3 things as the manual says. 1. Micro USB on the PC-Port for power delivery, 2. USB-C Charger plugged into the USB-C in port, 3. a device to charge plugged in the USB out port. Than it will show you readings.
The right tool for PPS was Application --> Fast Charge --> PD Trigger
In this moment I find out what the problem was. The firmware... I had 0.63 running and updatet to 0.68. Now the PD Trigger gives me a reading.
If you get values from, to displayed. For example 3.3-11V 3.00A then PPS is available. If only fixed volt values are displayed, you do not have PPS.
@@AlexDD99 Thanks, but really weird solution. I've also tried Application --> Fast Charge --> PD Trigger and didn't work but I haven't upgraded the FW. The AVHzY shows it nice and clear in letters "PPS" right away. Really disappointing from Fnirsi and it's even the newer device.
thanks for the vid, very much appreciated. You think we could add a USB-C to USB-A adaptor, and _then_ measure a USB-C to USB-C cable? (of course, the adaptor could be adding resistance too).
Hmmmm ... pretty smart idea ... should try this when I have time
OK worked ... here's the video proof: czcams.com/video/pVAIrZrZYu8/video.html .. and thanks again for the awesome idea ;-)))
@@allcheckout my pleasure! It's great vids like yours that help the rest of us to figure out how to use devices the fnb58 (especially people like me, who started out knowing just about zero about how devices like this work).
Not being able to measure USB-C cable has probably something to do with fact that it has higher voltage than stored in step 1.
OK thanks
We can measure it like that ;-)) czcams.com/video/pVAIrZrZYu8/video.html
1.A-A(FNB58)-REG
2.A-Cable-C(FNB)-REG
3.A-Cable-B(FNB58)-REG
4.C-Cable-C(FNB)-REG
1と2~4の差分を取る方法です。2~4の電流の経路はA(FNB58)と異なります。
A(FNB58)=B(FNB58)=C(FNB58)なら問題ありませんが、内部抵抗は違うので正しい計測とは言えません。また、4の場合は入力も異なるので正しい計測ができないのです。
Thanks for sharing here