Cold start rattle on your 2011-2016 Honda CRV. Here's how to fix it.
Vložit
- čas přidán 26. 08. 2024
- The Offroading Mechanic amazon store
amzn.to/3SiOjXd
Disclaimer:
Due to factors beyond the control of The Offroading Mechanic, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Offroading Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. The Offroading Mechanic recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of The Offroading Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
This should be a recall on all these Honda models. I got Honda to replace mine and it only lasted a year. I'm doing it myself this time, but all these manufacturers should be held accountable on this problem.
I'm the 2nd owner of a 2014 CR-V, bought it at 59K (warrenty expired at 60K) and within weeks after buying it it started the rattle, only on cold mornings. It's at 92K now and does it even on hot days, even if it's 85 degrees and you let it sit more than like an hour. I am ticked. I don't know what it would take to get Honda to recall it, since it's not considered a safety item. Thanks, Honda. My young CR-V sounds like a worn-out beater. The 2001 Taurus I moved up from (was this CR-V actually an upgrade though?) started perfectly every morning without any noises. It's really disgusting that Honda cares so little about thier customers and this WIDESPREAD problem with their cars. I am a young man (the new generation as they say) that specifcally bought Honda because of its supposed 'reliability'. By NOT addressing this issue, Honda is ensuring that I look elsewhere for my next car. Maybe Subaru. Or Chevy.
I have Honda CRV 2014 since December 2013. Have always had rattling noise... Went to dealership. They changed belt or whatever and the noise still there. I've had it for almost 10 years already..
I agree with you, I am an auto mechanic and these Honda's they all/many have this problem. Me personally I think all the chain, the guide, tensioner, the sprockets needs to be replaced, I think...I guess they were able to get away buy just replacing that one sprocket it is a cheap alternative, because replacing all the parts that i said it's a big job you most likely have to remove the engine out of the car. I am 30+ mechanic. I guess some of it they are doing under warranty and the corporation gonna be furious if they start replacing that many parts, because at the end the Honda Corp. is paying the repair bill. The dealer cannot replace parts as they wish too.
@@xjssts7127 I wish I knew it before.... After I came back from service center and it was still rattling, I kind of gave up :/ What an irresponsible car owner I am..
@@anthonyevich3836 same here. bought a 2012 EX with 73K 12/2022. Fast forward to now 90K its rattles like every other day or every other startup. I get it, honda never fixed it. There is a company (or startup shop) that made an aftermarket spring to be installed with the existing VTC gear. Most people had good results. But if you think about it its not just the CRV. Civic Si, Accord up til 2012, ilx and believe it or not the earth dreams 2.4L's as well but not as much. The engine runs mint though. It could use a valve adjustment. As a honda enthusiast I'm not mad but I do agree. Honda should have at least ran a campaign fix.
Well, that’s super helpful. You identify the problem and show the part and you call the part “this guy “😂
There are other videos on this
czcams.com/video/rkEcqxeE7R4/video.html
czcams.com/video/NEMasv7Ve2Y/video.html
I have a 2015 Honda CRV with 90k & a loud cold start timing chain. So this video really helps me, before I get into it. To see Everything I need to do, been searching for a video like this for a Bit. So thankful you made this one. Peace ✌️
That's why I have guys like you to do this type of work! Great job.
Thanks for the video. We’ve had this issue since getting the car. The seller was smart enough to warm up the motor before we got there.
Replace the VTC actuator locking pin spring. Takes under an hour with the proper kit with no risk to your engine timing.
Never had this issue i change my oil every 4000km i think people have issues cause they are changing the oil too late according to oil life which is a garbage system to go by
When I ask start up seller told me that the key was missing until next day of course they warming up before arriving, at honda dealer ☹️☹️😡🤬🤬
(Here's what this video maker said) Book time is 4.7 hrs in terms of shop rate every shop is different. While these vehicles were still covered under warranty Honda only pays 2 hrs to replace it this way. If I were to do it on my own vehicle i would completely remove the timing cover if it has higher mileage and replace the chain, guides and tensioner at the same time.
Thanks for the run through. Love how the part is referred to twice as “this guy” with no name description.
Just a quick note, my CRV is also a 2014 but it’s only got 48k km on it, I bought it new and drive it only to work about 30km each way and grossers etc… and have this issue… always maintained by the book and never abused in any way… amazing and I don’t understand why at such a low mileage this is happening but that’s life I guess…
Mine is 2014, replaced under warranty In 2017 and it’s needing replaced again. Sometimes it doesn’t matter sounds like a functional defect
It's not uncommon to have it replaced more than once.
If you're doing this you should also replace the tensioner. If its really bad you should also replace the chain and the guides. For example mine occurs only once in a while so im not going to bother servicing it until it rattles consistently.
This was done under the extended warranty. Honda only covers the actuator and nothing else we also only get 2hrs to do it. You may want to check out the videos that are out of the extended warranty such as these ones.
czcams.com/video/NEMasv7Ve2Y/video.htmlsi=fpVyy21vM-Qyd_uk
czcams.com/video/rkEcqxeE7R4/video.htmlsi=StvoORLMsl-iLvrD
@@theoffroadingmechanic thanks. I'm out of warranty so I will get my mechanic to inspect all the timing components and advise. I will have to pay full shot but that's ok it's not a big deal. Your instructions are precise and professional.
I have been driving my 08 2.4 honda Accord with that cold start rattle for the past 5 years, and the car is still fine.
Yeah been hearing that noise now for a second on cold starts on my '10 Accord 125k miles. I also heard that rattling can loosen up your timing chain. Just had a valve adjustment, new timing chain, new guides, tensioners too and new sparks plugs 2 weeks ago and I still hear the noise. I didn't know about the "VCT Accuator" until recently looking it up after the noise still happened. I thought it was from the loose tensioners/guides and timing chain. I still probably needed doing all this after having a 14 yr old car. So I'm going to buy the new spring from "spring-start" for the VTC Accuator for super cheap.
I hear that makes a big difference. Some say in time that rattling sound comes back w/o replacing the whole thing. Some say it comes back after replacing the whole thing. Same for the new spring, some say it works perfect others say noise will be back in a year or sooner. Some guys stretch out the spring only and say it works, but I'll just get a new spring. If it comes back after the spring was replaced and everything else I did, well screw it, let it be. The sound is minimal or very slight starting it in warm or hot weather even after many hours, mostly when it's colder or 5am in the morning.
@@1Mannco I tried stretching the spring. After it gets compressed it goes right back to exactly the same length as before you stretched it. You have any luck?
@@gfriedman99 So your rattle noise continued after the spring went right back to the exact same length as before??...Yeah I heard it may work stretching the spring and some said it doesn't work. I thought it would be a quick easy fix, but more like a band-aid job. I have a local garage I've been going to for years do my work too...But no, I didn't do that stretching thing...
After replacing the timing chain, tensioners/guides, new valve gasket, sparks plugs the rattle noise actually went away some. From 1 second of a hard rattle to a slightly less loud sound but still there for a second..about 10-20% less. Most of the time after the work was done it wouldn't rattle on hot days when I'd start it after hours of sitting.
BUT..I went ahead and gambled and bought a brand new VCT Accuator spring and replaced the old VCT spring. I heard good news about the new strong spring and stopping the rattle, some people said it was good for a couple months to a year but came back, others said it didn't do anything. Again, the rattle noise was a little less with all the work I had done before replacing the spring.
I went in thinking the new VCT spring would rid all the noise or decrease it even more. Well, it backfired on me and now it sounds like it did before I did any work to it, a loud 1 second rattle again. I have the oil level full so I can't figure why the new spring isn't working unless the whole VCT Accuator needs replacing. So I gambled and now out $150 labor and parts but there was 'no gaurantee it'd work.'.. I'll live with it and probably replace the whole VCT Accuator next year before it gets worse or does any damage to the new timing chain.
@@1Mannco Thanks for the details. Yes, I first tried stretching the spring. It didn't work so I got a replacement spring and when I went in to replace the stretched spring I was surprised to see it had compressed right back to its original length before stretching. I just replaced the chain tensioner thinking that had to be the problem since nothing changed with different springs. But no, it's still exactly the same. I mean the noise doesn't bother me that much and only lasts a second during the first start of the day. The chain seems to be in good shape since the tensioner is not over-extended at all. Not sure what else it could be. I'm thinking maybe it's the VTC oil control valve that's letting oil bleed out overnight. I'm gonna research that otherwise I'm stumped and ready to just live with it.
@@gfriedman99 I haven't heard of that part for the rattle noise or know what it is. I did find a YT video of a guy cleaning one, somebody commented that cleaning it or replacing the filter of the oil control valve took away that rattle noise, here it is...."I did this today on my 2.4L 2009 Honda Accord EX-L. Instead of just cleaning the filter screen, I replaced the screen itself and cleaned its housing. I wasn't able to remove the VVT Valve/Solenoid, as I imagine it hasn't been touched in almost 12 years and is stuck in there pretty good. Either way, after the screen cleaning, the noise from the actuator upon cold start up is now gone. In case others want to follow this video and run into the same issue as me, try a new filter screen replacement and see where it takes you. czcams.com/video/YYKikGysXqE/video.html
haven't finished the video yet, but it's definitely interesting so far, keep up the good content
Thank you 😁
I believe I have the same problem what happens if I don't fix it will it cause damage to the engine
To save money I just remove the top bolts off the plate of the sprocket ⚙️. & stretch the spring that’s inside, reinstall, and complete. This fixes the rattle on this era K-series cold start rattle every time.
Have you tried replacing the spring?
My heads off to you if it worked, I mean if you are not making things up. I am 30+ year mechanic. Can you explain in details witch bolt you are talking about and make a detailer video of the repairs.
@@xjssts7127 things don’t always have to be complicated. And if you’re a 30+ year mechanic you’d know that. You could easily look up videos on this detailing what I said. The fix I detailed works every time on non-Earth Dreams K-series engines.
@@spring-start no need to, as the spring is simply compressed and stretching it back out works just fine. You can if you want to though.
Link to videos?
I just completed pulling timing cover, replacing intake cam, guides, actuator, chain and tensioner. 2014 accord
Great video helped me explain what wrong with my moms crv... Been looking for this
VTC Actuator is the part
No... do not change the acuator its a spring thats faulty
I had this problem all you need to do is change the spring in the VTC actuator and you dont even have to remove the chain.
This is common on early 2GR-FE Toyota 3.5 V6 engines too
but they fixed it with updated parts, and the newer ones after 12-13 do not do it anymore
What an amazing video… really detailed, easy to understand and very well executed…
Can you pls tell me how many hrs of a job is this job if done by experienced mechanic like yourself? Many Tnx and pls keep it up with amazing vids…
Take cam out, put into vice with wood blocks and remove and install actuator. Test with air pressure for release and lock
Well, that sucks. Bought this CRV with the exact same issue, unless I diy, more costs...sad.
Wife is needing a newer car soon and we are considering a 2013 crv with 103000m on it. May reconsider after hearing about this issue. This is completely unacceptable. Hondas reputation should stand in the balance over this type of thing. The warping rotors are one thing but this. No.
Have you considered looking into the Mazda cx5 2017 or 2018. You may be paying more for a premium and nicer interior. With a little research may be a nicer fit for your wife. I would not rec. The 2016 or earlier models as those were when they first introduced there skyactive technology but later improved on it which I think became great engines. When I was a Mazda tech
@@theoffroadingmechanic Yeah I have considered Mazda and heard the early skyactive were a bit wonky. Thanks for the heads up about What years to look for. Have also considered rav 4, escape ,Forrester, acura. About all the smaller suvs. Are taking our time.
Yes reconsider
How long will the replacement last? What if you don't do the repair?
What happens if you still driving with this problem, because I have 5 years and nothing happens, only issue some times hear cranking sounds when accelerate
I have seen timing chain guides break. Jump timing.
Why do you have to take the camshaft out to remove the actuator? I’ve seen people do the cam phaser with timing chain and not remove the camshaft. Thank you.
I think he did it that way to inspect it. That’s my guess. Because I’ve done them without taking the cam out. Great video still. Very detailed.
There are other ways of removing the actuator I just do it this way but as a 2014 they typically burn oil unlike prior 2010 models. Its just good to check conditions while you're there. I have found lobes worn where a camshaft needed replacing while replacing the actuator. Not additional labour to do so.
@@theoffroadingmechanic that makes sense. Thank you. Great video
Like how detailed your man. My lady lady has a 2012 crv 4x4 2.4 head gasket has gone to shit 179000 mileon it. Tips on replacing head gasket!!?? Plz help and thank. Have not toren into it yet looking to start in the am.!
It's not too difficult once the timing cover intake an exhaust comes off. Just need something to hold the rockers together so the pins for the VTech don't pop out. I've done a few but didn't make a good full video on one.
czcams.com/video/obivteEvqfY/video.htmlsi=V9hF4Ns6EqweGBPK
czcams.com/video/cEHpOkU1FLc/video.htmlsi=WAESk9n8vpz3R2CU
Ok. I'm gonna probly holler at for few more questions? If that's OK. I've got the kno how but something with the little things like rockers n such I'm clueless.
Cold start rattle can also be a chain tensioner
This is true - however not directly in this case. I say not directly, because the main cause of the rattle is the spring for the locking point in the actuator no longer being strong enough. These will still rattle after the spring is replaced, and many times replacing the tensioner will stop the rattle.
Not true. Defective tensioner will rattle warm or cold.
@@gfriedman99 not true, tensioner will stop rattling once oil pressure builds.
Can't believe I missed these comments. I should chime in here about your tensioner causing it to rattle it is possible for the tensioner to cause the rattle depending on the situation. For example the earth dream motor in the 2016 CRV, and accord there is a screen/metal gaskets for the tensioner. For some reason the oil life indicator on these won't come on until near 10k miles depending on how you drive what I have found on the screen for the tensioner will get clogged up with junk restricting oil flow to the timing chain tensioner and thus also causing your rattle. Whole separate issue on the earth dream K series motor.
@@theoffroadingmechanic those godforsaken screens are great and a curse. Gotta have them to keep things clean but when they plug up the tensioner rattles and the old k24s go into limp mode. Having worked in the engine plant at HCM for 13 years I can tell you that oil filtering and screening are important
My honda does this , assuming its the same problem how much would this repair be ? Ball park..
We have replaced the Vtc actuator twice and it goes away for about a month then it’s back it’s so annoying and loud
Prolly your tensioner
Where are you guys located, and what's the cost of this job?
Would a higher viscosity engine oil help to keep some oil at the engine? My 2012 uses 0W-20. Friends have Subaru Outbacks with 2.5i boxer engines; the 2014 model calls for 0W-20 and the 2011 calls for 5W-30. I am considering a higher viscosity oil for the next change. Might that help?
The viscosity won't help in preventing the VTC rattle. We have a 2016 accord with the earth dream motor and it has been using 5w30 instead of the 0w20. And it still rattles. However, regular oil changes and doing 6k kms intervals it doesn't burn any oil which these engines are known for.
@@theoffroadingmechanic what was your motivation for changing to 5W-30?
All the piston rings we do at Honda and burning oil and also the long oil change interval on the maintenance reminder is what made me go with 5w30. Our accord gets 5w30 oil and it gets changed every 6k kms doesn't burn oil but it still gets the rattle on start up. It's also has about 160k kms. I've had those engines burn oil at 80k kms where people do 12k kms oil change intervals because of the maintenance reminder. In my 2023 4runner and my 2021 tacoma both calls for 0w20 but I've been using 5w30 in both since after the break in period. And in the owners manual it also says it is recommended to use a high viscosity if your vehicle is operated in high loads.
is that for all k24. my 2003 does the same and also at 5000+ rpm rattles away when accelerating 391,000 kms on car
CRV I that year likes to stretch chains. Also the tensioner for the balance shaft/oil pump assembly will constantly rattle people think it is the a/c compressor and they replace it and the noise is still there but with a stethoscope you can hear it rattling in the oil pan.
isn't simply change the spring inside the VTC actuator sprocket would solved the issue?
I just saw a video on how to fix this without all of this unnecessary work.
Yea you can do it without all of it but how are you able to tell if the chain guides aren't broken or cracked from the chain rattling. Had one last week, the guides were broken and in the oil pan and in the oil pick up
Yeah well if that’s the case than it will require replacements and everything. But sometimes it could be a minor fix at a fraction of the price
Yes I agree it can be a fraction of the price with a simpler fix from what you see on the internet but that is the internet for you and everyone is looking for a cheap fix but for someone that works on these cars day in and day out I see what goes on with them. These engines also burn oil and when ran low on oil you need to check the guides and crank sprockets for teeth wear. Things that these cheap fixes won't show you. You might be more interested in this video.
czcams.com/video/959vbtsLKPI/video.html
Thanks for another great viddy! Hey what's your take on folks with early Gen 4 CR-V's simply replacing the spring inside the locking pin with a slightly stiffer spring of the correct length, many swear that its a permanent fix although pin releases at a slightly higher RPM. I'd love to buy an early Gen 4 instead of another Gen 3, but this VTC snafu with its corresponding chain stretch and possible cam sprocket wear has me spooked.
Don't want to spook you any more but the 4th gen are prone to oil burning especially the later 4th gen where they put the earth dream engine in it. Low tension piston rings etc. I suggest the 3rd gen but from 2007 to even maybe 2010 or an early production 2010. When it still used 5w20 I really think that they should be using 5w30 oil in that motor IMO. I think that year of third gen are really good. Rear differential is still all mechanical just change the fluid regularly. The 4th gen they started putting pumps and pressure switch. Can't remember but it came out with a tab a while back where we had to take them apart to replace an electrical component when it sets a code.
@@theoffroadingmechanic Thanks, I appreciate the sage advice. Its interesting that a 2010 has a different VTC sprocket part number than both a 2009 and a 2012, my research indicates 2010's rack abundant km. In hindsight I should have kept my '09 CR-V EX-L that I sold before moving abroad 5 years ago.
You dont have to take the cams out to do this. I just replaced mine on my k24y2 and never touched the cams. Release the timing chain tensioner and youll have enough slack to pull the chain off the sprockets without removing the cam.
I was thinking the same, just remove the bolt holding the vvt to the cam. Assuming there’s room to do so, looks like it.
@@scott3801 there is
after i changed the actuator my engine has a permanent ticking noise what could be the cause? and the noise is permanent it does not go away, anyone got any suggestions?
We're the other timing components inspected and or replaced?
great video! any idea what would be a reasonable cost for such job in Canada/Ontario?
Depends the kms you have on your CRV if it's still fairly low kms then just replacing it this way is fine but if it's higher kms you might be looking to do the correct way which is removing the timing cover and replace the chains and guides at the same time.
We do them in the car here at work, we dont take of the cam,
Do you do it with the tensioner out for more slack on the chain?
@@theoffroadingmechanic The tensioner just has to have the mechanism retracted and held in place by a pin or Allen key, it does not have to come out. But yes, that is how they do it.
2022 Honda insight chugs upon start up. Is it pcv valve or valve adjustment needed or is it the vct actuator?
Why does my 2013 with 75000 miles burn 2 quarts every 1000 miles. I went to do mile oil change. The rattle had already begun 2000 miles before the rattle on startup. I was 2.5 quarts low on oil. I changed my oil. I restarted and the rattle occurred again, but not quite as loud. The CVT actuator is not the problem. Low oil makes the rattle occur. In my case, I had burned 2.5 quarts in 3000 miles, between oil changes. I routinely burn 2 quarts every 1000 miles at 110,000. Still think it is the actuator? Honda has screwed 1000s of customers just like Toyota did with the frame rot.
The rattles and oil burning or more common on the 2010-2016 CRV is what I have noticed also they have gone to low tension piston rings you will see in this video. czcams.com/video/959vbtsLKPI/video.htmlsi=s91QHWwLd8pUVBE_
what's the best way to diagnose what side is bad? is it always the intake side?
Only on the intake has the vvt. The exhaust has just a regular gear. New Honda's like the 1.5 turbo have dual vvts now. But haven't had the issue due to rattling on start up.
Cool now I know I need to replace "this guy" I think the name of the part your replacing is an important detail lol
I have a 2012 Crv with the actuator rattle. Mechanic said I should do the timing chain as well. This car has 105,000 miles and I have always changed the oil when the oil life indicator light comes on and have used full synthetic oil since oil change #2. My question is-can I just change the VTC actuator and take my chances on the timing chains ?
If it was my own car I would do it the right way and replace the chains and guides on a higher mileage car. But if you want to check and see if you might have worn guides or chains a quick look behind the timing chain tensioner cover/inspection hole to see how far the tensioner has extended and having the valve cover remove to see if you can see the color links for the timing marks are good indications if you need to replace chains and guides. It's a good way to decide if you need it or not.
At what mileage do you recommend to do the distribution chain replacement?
Quick and easy!
Just got my vtc actuator changed in my 2010 crv and a week later it comes back just quieter
Do honda civic tenth gen 2018 also have this problem? I can hear my car makes short screeching noise if i start the car in the morning. Very short high pitched noise at the end when it cranks to start. Does it sound like a vtc actuator noise or starter motor noise?
The actuator doesn't make a screeching noise and it's not common on the 10th gen. You might just have a slipping belt. Check your tensioner there is an indicator to know when the belt is worn. Harder to see on the 1.5t. that or your compressor shaft seal has leak oil on the belt.
@@theoffroadingmechanic will have my belt checked too. Serpentine is fairly new btw. Only 3 months old. Dealership replaced it as part of preventive maintenance this feb. I'm not sure if screeching is the best adjective to describe the noise. Maybe more like someone with stuffy nose, then tries to blow the mucus off to be able to breath again. 😂 But I'm glad to hear vtc actuator issue isn't common in newer civics. Hopefully this is just a belt, starter or anything minor. Thanks and God bless you!
I had my 2013 Honda CRV's engine replaced which should have technically replaced the VTC actuator and oil pump. I still get the rattle noise on a cold start. What could it be???
Did they put in a used motor? Or did they just do a short block and reused everything else. They don't make long blocks you either order a short block or the head assembly.
I’m not too engine savvy. When I looked at it, they had kept the outer shell of my engine.
They probably didn't do anything.
Have you found the guides wearing at all? Would also be curious to have heard the noise before repair.
The bulletin describes it as a bucket of marbles also warranty extension. But it's noticeable on start up when it happens or if you do an oil change on start up. Guides are usually min wear unless higher kms.
My 08 Toyota Highlander that I just bought from someone is making that noise I guess cus they didn't take care of the oil change but does it affect the engine at all if you don't replace it?
I think The Car Care Nut channel made a video of the Highlander and there common problems and what it can potentially do to the engine
No, it will not make a problem for the engine. It’s just an annoyance. Try running thicker oil as a starting point.
I switched to 5-20 oil instead of the recommended 0-20 oil and the rattle stopped
Someone recommended Pennzoil 0-20 Syn and our 2011 Accord rattle stopped after 2 weeks.Only drove about 100 miles a week.That was 4 years ago and noise hasn't happened since.I was using Mobil 1.Worth a try.
Try 5W30 as a next step, or if you will be driving in temperatures over 70 F. 0W20 is the reason why this happens, along with creating other engine issues because it burns off. When this happens, people drive low on oil that is already not thick enough to properly protect the internals and this overheats the timing chain, stretching it. It also overheats and weakens the spring inside the actuator and this is what causes the rattle.
Recently had my VTC actuator replaced by Honda on my 2014 CRV and the rattle was still there the following day with no improvements.
Did it sound like this? czcams.com/video/ZaQ8g0xsBnk/video.htmlsi=MnKEhQplPof94SLQ
Ive been reading that we need to replace serpentine belt tensioner. Good luck.
Install a Honda Extreme VTC spring
My2012 Honda CRV has the same problem. Where are located?
Can somebody please tell me the name of the car piece.
It would have helped if you mentioned how important it is to fix this orbwoukd it be okay to put it off? Also what is the cost of this procedure?
Haven't seen a catastrophic failure from this yet. And for cost I don't have an answer since I have only done it under warranty and good will. Which there's a procedure to do it so warranty only pay 2 hrs. But book time I believe somewhere from 4 to 5 with removing the timing cover cleaning and resealing.
@@theoffroadingmechanic - If you don't fix it, does it affect the performance or the way it runs?
Just the other day I had a customer with the issue of a rattling noise and a check engine light it had a cam and crank out of phase code. I had to check physical timing and it had jump timing.
Good morning, I have a crv 2014 car. When I start it in the morning, it makes a rough sound, but for how many moments, can I know what is the problem?
How long can you ignore that rattle for? Asking for a friend.
Haven't seen any catastrophic damage. People usually come in when they start hearing it.
For a while but it will lead to chain failure. Seen a couple of them at the dealer. But it will be very noisy and rattle for a long time after startup before that happens.
Our 2016 has 140k miles. Nothings ever been done for this problem and I’m not messing with it. Rattles at startup and after oil changes. The thinner/higher miles on your oil the louder/longer it rattles. I run a magnetic drain plug and do all my own oil changes between 4k and 5k miles with Mobil 1 0w20 and there is minimal residue on the plug every time I check it. It sounds bad but it’s nothing to worry about in my opinion. I tried a can of something Honda said to put in the oil but it didn’t do anything for the issue. I have thought of switching to 5w20 to see if there’s a noticeable difference since we have high miles on it anyway to see how it sounds. Thinner oil just drains back quicker leaving it a little dry up there in the motor making it do this. Yea Honda Goofed on this one. The best Hondas are on 2 wheels in my opinion lol. I’ve only ever changed the belt, spark plugs, and the basics on this motor so it’s been a good run and these are literally everywhere on the roads so still Honda quality. Still on the original battery.
How much would you charge for this job?
Great video. How long should a shop bill for to do this procedure?
Book time is 4.7 hrs in terms of shop rate every shop is different. While these vehicles were still covered under warranty Honda only pays 2 hrs to replace it this way. If I were to do it on my own vehicle i would completely remove the timing cover if it has higher mileage and replace the chain, guides and tensioner at the same time.
@@theoffroadingmechanic Would you consider 92 thousand miles time to replace the chain, guides and tensioner? Mine hase been grinding since 59 thousand miles. :/ No OBDII codes, and no codes on the dash. It just sounds like crap when starting every morning. A masive clatter reasonating under my apartment's covered carport.
My buddy had his replaced and it still rattles lol
Did they just replace the VTC actuator? Where you can sneak the sprocket out or did they remove the timing cover and also inspect the timing components for any broken chanin guides?
@@theoffroadingmechanic they replaced everything that had to do with timing new chain guides vct actuator almost of it now two weeks later it jumped time 🙄 so idk if they did it right or what but it still made the noise that's why I'm not replacing mine just for it to make the noise again ya ko
czcams.com/users/shorts8o4a-Tml3pg?feature=share
Can you check this it can also sound like it but it is actually just a worn out belt bottoming out the tensioner that makes it sound like a VTC actuator
@@theoffroadingmechanic wow ya no mine sounds like thanks man me and my dad will deffently check that out big help man
Is it necessary
What causes the sprocket to go bad?
Wear and tear
What is the part number?
2016 crv also
The later 15 and 16 will have the earth dream motor but also do the same thing. Just titled 2011-2015 for the non earth dream motor in the CRV. czcams.com/video/959vbtsLKPI/video.html
Hello mate I accidentally turned the cog into the lock position does this effect anything ? If so how do I reset it to the unlock position? Cheers.
Did you already torqued the bolt to the camshaft?
No
You will need the camshaft. On the camshaft main journal there will be a few holes you will need to blow compress air to unlock the pin to be able to turn it back to the unlock position
@@theoffroadingmechanic will run if I just fit it and let the oil pressure set it,why does it need to be in the unlocked position?
Also just looked the cam and cog I removed and it is in the locked position.
I wish you had a video in that I could hear what the problem sounded like. I have been watching videos that had the VTC problem and the cold start sound that I had was more of a chain hitting he sides of the valve cover. czcams.com/users/shortsCbc1eBzJ0EY?feature=share What is this sound? I think its the timing belt tensioner. I could be wrong. Cold start in the morning and it goes away.
Its because the VTC actuator isn't locking causing the chain to slack causing it to sound like that. I'll make a shorts video when I get one
springstart vtc has a video of the sound to diagnose and replacement honda vtc locking pin springs to help without replacing the whole gear for all Honda and Acura vehicles.
Good morning, I have a crv 2014 car. When I start it in the morning, it makes a rough sound, but for how many moments, can I know what is the problem?
Good morning, I have a crv 2014 car. When I start it in the morning, it makes a rough sound, but for how many moments, can I know what is the problem?
Typically 1-2 seconds there is a rattle or grinding sound.
Problem ne neden soktu ve değiştirdin
Arabayi calistirinca bi ses geliyor araba sogukken, araba sicakken sorun yok. O sesi gidermesi icin degistirdi. Motora sorun olusturcak bir durum degil, sadece ses gitmesi icin degistiriliyor.
Do not fall for this scam. My dealer tried this on me. We use an old timer who specializes in Japanese autos. We have a 2004 Ep3 SI Honda. He replaced the PCV VALVE. Problem solved. Do that first. Get a proper OEM PCV VALVE. Do the simple things first. 😮
What are you going on about? 😅 this is a common failure on these cars. Go back to the looney bin
@mediaguy4037 OK cupcake, you know everything. This worked for me. It was inexpensive. VETEC works like a bear. Best of all...I did not have to take the top of the engine off. Please, don't try it. You are one of those untrained shade tree guys that have one tool in the box..a hammer 🔨.
@@GgRae-gv1tg calling something a scam when this is a car repair video. Your mind is a scam 😅 go read a book
@mediaguy4037 Are you OK? You seem to be highly emotional and acting out. What have you done to your customers? Broken their trust? Lack of integrity? Hmm I wonder 🤔 😏 😌.
@@GgRae-gv1tg I’m not a mechanic. You nut
We have replaced the Vtc actuator twice and it goes away for about a month then it’s back it’s so annoying and loud
It doesn't happen to be an earth dream motor is it? If not can you see if it is something like this I have a shorts video.
czcams.com/users/shorts8o4a-Tml3pg?si=nhpTslKdFGnSHJ19
We have replaced the Vtc actuator twice and it goes away for about a month then it’s back it’s so annoying and loud
Can you check this I have a video maybe it's not a VTC actuator rattle and just a worn out belt
czcams.com/users/shorts8o4a-Tml3pg?si=nhpTslKdFGnSHJ19
Just replace the Honda VTC actuator spring. Easy "search"