How To Change a Hayward Super Pump Motor Bearing and Seal | Hayward Pump Motor is Loud
Vložit
- čas přidán 18. 04. 2021
- How To Change a Hayward Super Pump Motor Bearing and Seal
If your hayward super pool pump is making a loud noise, that means that the pump seal has failed and is leaking water back on the front motor bearing. Its best to replace a leaking pump seal as soon as you can, because it will cost more to replace the pool pump bearing.
❤ SUBSCRIBE - czcams.com/users/VIPPoolsand...
🎁TIP JAR - PAYPAL: paypal.me/vippoolsandspas?cou...
👀 How To Change a Hayward Pump Seal
• How To Change a Haywar...
👀 Hayward Pump Seal or Bearing Change (Video for the piece in the back)
• Hayward Super Pump is ...
Legal Notice: Any electrical connected to your hot tub or swimming pool should be worked on by a licensed electrician or service technician. Please call your local pool/hot tub Technician for a service call before doing any work yourself.
--------------PAID LINKS BELOW----------------------
✔ Hayward Super Pump Seal
amzn.to/3vsUSJl CANADA
amzn.to/3M9Ndqf USA
✔ Hayward Super Pump Bearing
amzn.to/3jLbAyr CANADA
amzn.to/3KUqsqa USA
✔ Pool Pump Bearing Puller
amzn.to/3ryZhti CANADA
amzn.to/3MfvcXp USA
✔ Swimming Pool Silicone
amzn.to/3JYsBzW CANADA
amzn.to/3rzsfsT USA
amzn.to/3Ong6RU USA
✔ Swimming Pool Teflon Tape
amzn.to/3MfxUMz CANADA
amzn.to/3uSK9sY USA
✔ Swimming Pool O-Ring Lube
amzn.to/3MfCta2 CANADA
amzn.to/3vpC0v5 USA
#haywardpools #hayward #swimmingpoolservices - Jak na to + styl
Thank you. Nicely done video good pacing good lighting clear explanation
Great reference video. Every few years (think it’s been about 4 now) my pump starts getting louder and the impeller doesn’t turn as freely. I always have to debate buying a new pump vs paying the local pump repair shop at least $100 to do this. I hate to discard the pump for such a simple and cheap part. Going to give this a try. Thanks….
Sometimes at opening a pump will seize because the seal dried out a bit. I have a short video on that. czcams.com/users/shortsVVdGBQRMHVQ
@@VIPPoolsandSpas thanks, will watch
Pump/Motor bearing replacement is the same on all pool pumps. And. If I have to tell you to turn the pump power off, you shouldn't be even trying to fix the pump.
Very helpful, thank you!
Excellent, helpful video thanks !!.
Glad it was helpful!
Been referring to this video all day, super helpful. Thank you!
If there's ever a video that you can't find on my channel, let me know. Thanks for watching.
I used this video as reference yesterday to change both bearings in my Hayward Super pump. Two bearings cost me $20 from a local pump repair shop and I bought a China Made 3-1/2 gear puller to get the front bearing for another $20. I had a smaller gear puller in my tool box that handled the rear bearing. One caveat for all who attempt this repair at home, be very careful with the long bolt rods that tie the back of the pump housing to the front. I snapped one trying to undo it. It broke at the top of the threads. I ended up brakng the remains off int the threaded bore. I was able to put it back together, but no it's being held with only three rods rather than four. Fortunately for me, the rod the broke was on the bottom side, so I have two rods on top holding the motor housing in tension, which is good. No issues on start up and the pump is super quiet now. The motor is over twenty years old and if I can get a few more years out of it, I'll be happy. Had I had a little more patience, I would have waited 24 hours for penetrating oil to have worked its way into the rod bore and I would have also applied some heat to it to see I could have removed it without breaking it. My gear puller also dulled the threads to the centrifugal switch screw bore. Fortunately, I had a cheap tap and die set to chase the threads and get that switch back in place. If you have some mechanical expertise and the right tools, this is a pretty straight forward repair for the average handyman.
All that happened too you, happens to me. It's just age.
Thanks for sharing. I'm going to have to give it a try.
Its easy. Thanks for watching
Hello, my pump is hard to start, I have to tap it with a rubber mallet, can that be bearings or the capacitor.
Sounds like the bearings
Good day, will the bearing shown in the video and on the link work with the C48L2N134B1 1.5 HP SUPERPUMP motor? It is attached to the SP2610X15 pump. Thanks in advance.
All bearings have a number on them. I would look for that number and order it online.
@@VIPPoolsandSpas thank you for the prompt reply, I really appreciate you and your videos!🙏👊
I have a Hayward 1.5 sp2610x15 that needs a new motor assembly. Can I put a 2hp?
Do you have 2 inch plumbing? Look for a flow chart on Haywards website. I think they have one there for the pumps.
I’m going to try this before I ditch the pump. You know they make pliers called snap ring pliers for those clips. Get a good set not a cheap set though
Cant carry every tool for every job. That ring always breaks off anyway.
@@VIPPoolsandSpas probably right I’m going to go do mine tonight I think. I’m optimistic on this. Pumps making an awe full squealing noise but still pumping fine
Not to mention a spring hook.
I’m curious, how is this holding up? We used to replace bearings for customers with Hayward pumps 20 years ago and now I have my own pump that is getting loud. I think I remember them coming back a year or two later. It’s worth it in any event, with how high pumps have gotten.
More than 4 years later, when I start replacing again.
@@VIPPoolsandSpas great results👍🏻
No limpia la suciedad dentro del motor tambien es parte del mantenimiento del motor
As long as you learned something. People want to see how to change something, not clean it.
You need a special tool called a c clip removal tool.
The first 2 little screws for backplate were removed completely to take off plate. Why did you say not to remove them all the way?
If your talking about the 2 screws for the back cover, its because they don't come out all the way but most people will force them out. It can mess up the threads.
@@VIPPoolsandSpas thanks, just saw it as I took it apart
I can’t get the impeller off for the life of me!! I used a wrench to hold the other side while turning the front by hand but it’s so hard and wouldn’t budge. Any tricks plz?
I don't know what to tell you. I've never had an impeller stick on me for a hayward super pump. I've had some VERY hard ones to remove. Might need an extra person. One holding the back and one turning the front
@@VIPPoolsandSpas A strap wrench on one end a open end on the other.
Sorry you lose me at disconnecting the electric supply. If I have to disassemble the whole motor to make it quieter then I am just buying a new pump.
Good job but fuck that I’ll just replace the motor lol
If you can replace parts and not the whole thing, it's cheaper. Easier then you think.
@@VIPPoolsandSpas to much work
I would give this a try. But it is 50/50 that I will end up with a bucket full of parts that I end up throwing in the trash and buying a new motor anyway... LOL But thanks for the video - it is helpful!!
@@tad5920 its easier than you think. There's really not many parts to put back.
@@VIPPoolsandSpas going to take my motor to the pool store this Friday , my wife can’t stand the bearing howl anymore lol 😂