В поисках снега, февраль 2023

Sdílet
Vložit
  • čas přidán 20. 02. 2023
  • Чтобы найти хоть сколько то снега пришлось менять локацию, но туда доехали уже не все. На Паджеро сломалась заварка в переднем мосту, у УАЗа проблемы с коробкой. Снег в переметах как цемент, плотный и сухой, но из-за того что переметы короткие их вполне можно было пробить

Komentáře • 18

  • @set89w202
    @set89w202 Před rokem +1

    Хороший отдых. Всем добра.

  • @user-ve3bq2cr8g
    @user-ve3bq2cr8g Před rokem +1

    Молодцы! Все грамотно ехали.

  • @ramzes1633
    @ramzes1633 Před rokem +1

    Классный видос получился!

  • @faxon7764
    @faxon7764 Před rokem +1

    Hello, is the piston from the 4m40t engine still in the pump?

    • @OFFRoadNmsk
      @OFFRoadNmsk  Před rokem +1

      Hi. Yes. And the VGT turbine. There are plans to try the largest 12 mm plunger from KZ

    • @faxon7764
      @faxon7764 Před rokem

      @@OFFRoadNmsk I have a 2.8 Facelift wide fenders 33x10.5r15 Journey Digger in winter and 33x12.5r15 in summer, for now it is not boosted, nothing works fine, and have you unscrewed the screw on the pump all the way and which is your turbo exactly?

    • @OFFRoadNmsk
      @OFFRoadNmsk  Před rokem +1

      @@faxon7764 didn't understand which screw? cyclic feeding? No, he's not up to the limit. Just adding fuel is not exactly what you need. It is a large injection per unit of time that is needed, and not stretched over time, so a large plunger is needed. But there is no sense in a large amount of fuel, you need turbine pressure. My turbine blows 1.2 atm, so I can give more fuel. VGT from later models, but it is electronically controlled there, and I have it mechanically

    • @faxon7764
      @faxon7764 Před rokem

      ​@@OFFRoadNmsk I was thinking about the screw that is on the pump, do you think it would not add power to it but only consumption, smoke? how can I increase it a bit and make it reliable again without touching the turbo, I almost fixed the pump with a set of gaskets, it stopped cold... And how many mm is the 2.8 piston?

    • @faxon7764
      @faxon7764 Před rokem

      @@OFFRoadNmsk ?