T.REX Raptor 2.0 Holster Overview
Vložit
- čas přidán 3. 06. 2024
- The Raptor is a simple, versatile inside-the-waistband holster. It features built-in cant and tuck for increased concealability, a stable two-clip design with optional Monoblock compatibility, and a lower base price than the more modular Sidecar. If you are looking for a comfortable, low-profile, durable holster to carry at 4 o’clock or appendix, the Raptor is a solid choice.
We offered the Raptor as a holster from 2015 through 2021, when we retired it from our product offerings with the introduction of the Raptor Wing Attachment for the updated Sidecar. This attachment allows the Sidecar to be run in the 4 o’clock position and function similarly to the Raptor. But it was not exactly the same. The Raptor’s footprint is smaller than the Sidecar, which can make all the difference depending on your priorities and needs. We are pleased to offer the Raptor again, now with the superior engineering and manufacturing we’ve honed over the last 3 years backing it up. - Věda a technologie
How about installing ALL the clips for MAXIMUM CLIPPING STABILITY!
That will really hold it to the belt that you are holding up with suspenders!
@@isaacbotkintrex You forget, the double belt BEFORE the suspenders.
@@isaacbotkintrex my pants hold my belt up.
“Who’s the REAL hero here.”😂
@@f308gtb1977 It you buy your pants small enough, the belly/ass holds up the pants 😉
@@f308gtb1977Ned schneeblee is the real hero. Not your fancy pants.
Just got mine today for my M&P 2.0 compact 4”. This holster is a Masterpiece I must say. AIWB
Always great to see a product launch, or even innovation on old technology.
Great news letter on it - got to love a company putting AMERICANS safety and security first with always improving products.
I'll say it, the Sidecar 1.0 is the best appendix holster ever made. I have several as well as the O.G. Raptor, they're awesome. I also have a Sidecar 2.0 for my 320. It's a great holster, but the 1.0 with my MR920 gets carried the most. Great company, great products. 🙏🇺🇲
That rubber washer tip is super underrated
I am excited the Raptor is back! I have been carrying my original Raptor w/ G43 for 6 years.
I still have my Raptor for CZ 75 SP-01. I took a Dremel to it to make room for my optic that I had Cajun Gun Works slide cut. Still a good holster.
The explanations and comparisons are superb! So many choices, so little time. Thanks Trex team for your continued support of us deplorables.
Hell ya, I’ve been hoping you guys bring the Raptor back!
As a trex and tenicor enjoyer- Jeff Mau is proud of you
I modified and put a mono block on my old raptor. it was an x300 version and i actually use it to carry an 1911 with the light with a small amount of dremeling to accommodate the safety. Used it for years. Glad to see an updated model.
was originally for a 19 x300 combo
Been waiting for this to come back, perfect with the double clips
Once again TRex has up its holster game
EXACTLY why I will buy from TRex Arms. You guys are great at showing your product. Showing how it’s used. And explaining what is different compared to your old one.
Good job being clear for which holster is intended for what - Sidecar for appendix, Raptor for 3/4 o'clock, etc. Thanks for the clarity and great products!
This holster is easily used for AIWB. The pamphlet that comes with it says can be used from 12-1 o'clock position. I've been wearing my Raptor 2.0 all day at the 12 and it's fantastic.
As an avid 3-4 o'clock carrier with the side car, it works great. Super comfortable, very concealable (Glock 48 MOS with a TLR-7 Sub). Love to see the continued development, but I love having my accessory option (usually a CAT TQ).
Hellcat Pro and Canik, would definitely buy today...
Great video. Just placed an order for the Raptor 🇺🇸👍
I'm still waiting for the AR-15 appendix holster
Now to patiently wait for the triumphant return of the Titan
Dude, im literally gona buy 4 of these. This is awesome.
It will be money well spent. After a few adjustments of the retention and moving the claw to the back, it is perfect. Even at the deepest concealment height, I can still get a full purchase. Couldn't do that with my other two holsters.
I have an OG Raptor for my VP9. I'm excited to get a new one for the shield plus :) thank you!
Just got mine today for my 19 with the TLR7A. By far the best 12-clock AIWB holster I've owned. After a retention adjustment and the T1C XL foam wedge, I barely even feel that it is there. I can feel my IWB dual mag carrier more than it. Worth the price and wait, which was roughly a week.
I wish you guys had come out with this years ago. I was angling for a Raptor when you replaced it with the Sidecar 2.0. I like it, but sometimes it's a bit much for what I use it for.
Used the ironside backing for my sidecar appendix holster👌👌
I LOVE T REX ARMS
TREX is awesome 🤜🏼🤛🏼 (and good interview on WPS✅)
Really bummed there isn't any support for the 43x with the Surefire XSC. It is understandable from a business standpoint, but on the consumer side of things gotta say it is a big bummer.
You guys are the best!
Best holsters in the game ain’t none changed.
I've been carrying the iron side with the hybrid backed awb. I didn't think they'd make this with the backer too. But hell it still works very well for me
Hope y’all add more gun manufacturers to this like you did with the sidecar 2.0.
Good deal! Loved the raptor.
Just ordered td...finally a proper 26 rig!
Best holster I've ever bought.
I'm getting my ironside hybrid delivered today and you're just now dropping this...😅
Still have my OG Raptor 👌
The original raptor was my favorite holster for several pistols, so I’m glad to see a new iteration of it. I also have a sidecar, but don’t care for it.
Hey T.Rex friends… the backer needs to cover the rear of the slide of the gun. Your backer is great but the gun isn’t covered on the Ironside version. Don’t make that mistake in this version.
The problem with that is if you have excess backer material it can interfere with holstering the gun while wearing it.
@@ballisticbeard7 yeah that’s what they said when I called them. There’s literally no point to their backer. AlienGear makes excellent backer. Never had draw issues. Don’t reccommend their half shell holsters and stopped carrying it a long time ago. I actually took their backers and glued to one of my T Rex holsters. No draw issues. And I did practice.
This seems to be the most well-designed holster you guys have come up with! Just ordered mine and curious to see how it stacks up with Tenicor!
Nice post🙏🇺🇸🙏 thank you for sharing this ,Nyt
now i have to buy a new holster
I still love my Xd subcompact. Will this holster be available for it?
Any plans for a hellcat pro model of the raptor? You have options for hellcat pro in sidecar and iron side. Thank you.
I have two old t-rex holsters from maybe 2017 or 2018 and I was frankly not impressed with them. I think they had a lot of kinks to work out. The first generation sidecar was really uncomfortable, and the early raptor holster had a terrible fomi clip and didn’t conceal well. I’m glad to see your company continually improve. This holster looks much better. I would probably buy one if I were in the market right now.
What holster did you end up with?
will we get a backer for the sidecar 2.0?
That backer is pretty awesome.
@TREXARMORY Plz make a backer for the sidecar!!!
I still carry the original raptor and it’s great. One think you guys should work on is improving the claw to be more comfortable or a little different so it doesn’t poke lower
I have swapped out all plastic clips for those monoblocks from DCC, holsters i wanted to trash became favorites overnight, my P-01 prints less and carries better than my 365x all with a clip change! they are soooo underrated and im guilty of looking at it just as a "clip" as well! recycle the plastic lol, go all steel for all holsters!
How does this compare to the Ironside hybrid?
Will you do a backer for the Sidecar?
I'll have to give this raptor a try, a never could make appendix work.
Recently thought about getting a summer carry set up with a 43x and a holster only load out
Currently I run a Glock 45 with an X300 and RMR in a sidecar and I love it but if I feel like going light on clothing it's just jot always the easiest to conceal lol
I predict that this may sell better than the current Sidecar. Most folks don't need or want the spare mag/tourniquet/handcuff option and the price point is a more approachable. I own a Sidecar, but I may still pick one of these up.
Good stuff.
Curious to see how these stack up to Tenicor. They look a little bulkier
"The One"good morning,take care always 💞🇱🇷💞
Great vid. glad you covered the diff between the raptor and the side-car. Keep doing what you're doing!
does it cover the mag release? I couldn't see if it did.
Do you guys think you will make a holster for Canik?
Can you do one for the 43x mos with the surefire xsc?
Please make it for the beretta 92! I used the sidecar but it felt too wide for me and this looks perfect (sidecar is still badass though)
When are you releasing it for pdp f series?
Lucas is the Steve Jobs of the gun industry!
Do you make it for gen 4 Glock 20? Ya'll are always my go-to for holsters.
What weapon/light options will be provided?
Do you vacuum seal the holsters?
Why did you originally get rid of the raptor When you put out the sidecar? I don’t know if I understand getting rid of the raptor just to bring it back when I’m sure people said the sidecar was too big.
Ok. So I have a gut (working to get rid of it) but for the time being I have one. Most IWB holsters are kinda uncomfortable cause they dig in. What can I do to the raptor 2 to make it more bearable?
Can this holster work with a 365 x macro, with tlr 7x and a red dot?
How about a suppressor holster for the TLR1 light?
Will you be making these for more fun models than you currently have available?
I’ve found that the monoblock clip catches my shirt when I draw carrying at 4 o’clock. Also that a minimalist wedge works best.
I just want y'all to make a holster for the Beretta apx line 🙏
Any plans on making one compatible with P80 940C frames?
Nice
Waiting for Hellcat compatibility.
Will we get CZ compatibility?
YESSS!!!
Wish they made a Ragnarok holster for the Gen5 20/21.
any word to add the walther pdp lineup???
Hellcat and Hellcat Pro With and Without TLR7X
How soon will we see this in FN509?
Will this be compatible with the Soft Loops with the snap dots?
Yes
Can you make some of these for some older models? Everyone makes a holster for glock and 2.0 and PDP. There are so many good guns that aren’t even that old that need holster upgrades. (cough cough m&p9C 1.0)
Word.
Sentence.
@@TREXARMORY Paragraph.
@@TREXARMS Essay.
@@TREXARMORY Novel
@@TREXARMS Bible.
Now please make one for C2 with Holosun 507c and Tlr7x😮
Sweet, l'll pick one up soon. Please make a duty holsters, SAFARILAND is too expensive.
I have a few, and Safariland duty holsters seem very reasonably priced for what you get. They’re multiple layers thick, nearly indestructible (not literally, but compared to normal holsters), and have “industry leading” retention hardware. Their ALS system alone is worth the price of admission. (I just wish they liked H&K more, but neither does T.Rex.)
What model would I have to get to fit between a KORE belt buckle? They are larger then most.
You’d want the Sidecar.
That’s why I don’t wear those belts even though they’re great. Most guys run the buckle on the side, which I find pretty uncomfortable. I ended up going with a super-flat G-Hook belt (from Volund Gearworks but I’m sure lots of places make them), just to wear appendix without having to try to stuff a belt buckle between two clips that are nowhere near far enough apart to do it.
If carrying 3/4 o’clock IWB which is a better option, the ironside hybrid or a raptor hybrid for concealability?
Also, please make a concealed carry holster for the Springfield XDS. I know they’re discontinuing them but the other holster options suck.
Lol, you want them to develop, market, store, and sell a holster for a discontinued gun?
Yes I do. Because I have one and it’s a great gun. It was on the market forever and they sold more than a few.
Also, T.Rex makes holsters for other discontinued guns
@@Dusther210how about you ditch that gun and get something else. You will get straight roasted if anyone sees you with that pistol and are seriously saying it’s a good gun lol.
At least get a prodigy or a Echelon
Why spend $600+ on a gun plus magazines and holsters when I just want to spend $70 on a new holster?
I’ve been using an XD and XDS for work for years and I have no issues with either. I like them. I also like T.Rex products. I have the Sidecar and Ragnarok for my XD but they just don’t have a holster for the XDS.
does this holster fit a sct frame glock clone?
4:04 what's the electrical tape on his hand for?
Please release one for the M11-A1....PLEASE lol
Now make a 43X MOS with XSC light please!
PLEASE PLEASE make holsters for the HK45/C/P30/L! One holster for like 7 HK guns!
This!
I have multiple holsters that fit most or all of them, some with lights, some without. 100% provable. But the only replies from TRex is, “that won’t work, they don’t fit.” They absolutely do. I should make a video and send it to them but I don’t know if they’d be interested.
Level 3 retention holster when?
Bro!! No option for the Hellcat Pro?! 😔
Please make a mold for FN 510/545 with light
Looks like I'm sticking with the Iron side until they come out with one that supports my Beretta M9
New Raptor drops on Wednesday...my Ironside Hyrbrid is due to get delivered Thursday...welp lol.
I dont have a single belt buckle that fits in between the sidecar clips either haha, have to put the buckle off to the side like a guitar player
Most people who carry appendix have to move the belt bucket to the side.
@@madeintexas1213 I say bc he mentioned it in the video