Got a 7inch snail quad that flies about perfect in BF. However, no OSD and cant arm in INAV with the same settings. I set out to make it an INAV build but chose BF first as a baseline. now that its about 6 months old hopefully I can resolve OSD and try it again. I just wish it would record these in logs because I dont get it on my goggles.
it definatley sounds like something is up with the port mapping in INAV vs what you have in Betaflight! It could also be something going on with target and how it maps pins from the MCU to different pads on the board. I really hope you get it worked out!
Before buying a new fc or esc, double check the pins inside the plugs, sometimes they get bend. Almost all boards have solder pads and can be used to salvage it.
Thanx for sharing mate,i looked these up when i was setting up my radio n babyape v2,frustratinng as,would have and will be nice just to come to 1 place to find out what this is ,cheers,now expresslrrs has changed so much as well i have to relearn everything ,hehe.peace bro!
yeah they can all be a bit confusing, lol. I remember the first time I got one of these and had to run to the far corners of the internet to figure out what it meant!
Well .I'm back !I reinstalled my radio lost all models but found old ones I created a new quad model done everything in there then done everything in betaflight.weird thing was my external happymodel es24 pro I think it's called set to 250mw was revving its fan out (I really wanted to say guts) so it started connecting disconnecting for 10 minutes with the battery plugged in as it won't turn on unless a battery is plugged in its a v1 f7mini fc . So time to repull it apart by the looks .miss ya bro.peace
I really do need to get that thing back out and play with it! I have been holding off on it since I stole the ELRS receiver from it a while back, but maybe after I move everything to the new studio I can get put back on it.
Rx_ failsafe throttle msp gps.. is what I got.. and it won't arm but will arm.. when I turn gps off in ports.. kinda puzzled.
Před 5 měsíci
I restored the config in betaflight and I did not make a backup and now I get RXLoss MSP CLI and I don't know how to repair it, the control does not connect at all to betaflight
Hello, I am trying to bind my a Babyhawk 2 O3 ELRS with the Zorro ELRS version. The red light on the receiver is solid and the Zorro even tells me that telemetry is on or when I dosconnect the battery that it's lost. So somehow I think it should be binded. But I can't arm the drone. Also Zorro does not do anything in Betaflight. Bars don't move. It's just like it is not their. I am actually sure that I updated the Zorro correctly (ExpressLRS) and I also think that I flasehd the Babyhawk correctly. Also the RX_Failsafe MSP is in my Systeminfo. But I can not arm the drone to get rid of it I am trying for over one week now and I do not have any idea how to proceed :/ Can anybody help?
Help me please my new bubito drone doesn’t arm and it’s giving me the throttle msp flag saying the channel is to high Idk what that means please I’ve been trying to do this for 4 hours now
hmmm, so usually an MSP flag means that you have a USB cable attached. I am guessing that you probably don't have one connected right? If that is the case, take it to BF configurator, connect to it, and make sure to hit the disconnect button before unplugging it. As far as the channel high/throttle one, that will mean that it thinks your throttle stick is up further than the bottom of the stick. This can be a couple of things really. First, I would take the time to calibrate your sticks in the radio. Usually that means running the calibration and lightly making circles with the sticks all around the edges so that it can find them. Once you have that, if you are still getting the flag, make sure that in the receiver tab of BF (you will need your radio on and a pack plugged in to see this) you get the correct throttle channel moving when you are moving your actual throttle stick. If that checks out, put your stick all the way down to the bottom and take a look at the number that channel reads. Go to the stick low threshold on the right side of that page, add 50 to the number you got as the low number when the stick was all the way down, and type that in. That should get your throttle arming flag taken care of :)
Got a 7inch snail quad that flies about perfect in BF. However, no OSD and cant arm in INAV with the same settings. I set out to make it an INAV build but chose BF first as a baseline. now that its about 6 months old hopefully I can resolve OSD and try it again. I just wish it would record these in logs because I dont get it on my goggles.
it definatley sounds like something is up with the port mapping in INAV vs what you have in Betaflight! It could also be something going on with target and how it maps pins from the MCU to different pads on the board. I really hope you get it worked out!
I love this Bacon . Great job . More of this would be awesome 🤘🏻🙌🙌
Thank you man! I have a whole lot more of it incoming :)
Fantastic tips, dude! Thanks a bunch! 😊
Stay safe there with your family! 🖖😊
I always appreciate you buddy!
Before buying a new fc or esc, double check the pins inside the plugs, sometimes they get bend. Almost all boards have solder pads and can be used to salvage it.
a very good tip!
YESSSSSS THANKS YESSSSS FINALY
Thank you Mr. Bacon.
I would love to see a video on tips to increase range , I have a Walksnail system and am trying to increase the range slightly
That is a good idea! There are a whole lot of trade offs and different ways to consider, so I will add that to my list of future Bacon Bits videos :)
Thanx for sharing mate,i looked these up when i was setting up my radio n babyape v2,frustratinng as,would have and will be nice just to come to 1 place to find out what this is ,cheers,now expresslrrs has changed so much as well i have to relearn everything ,hehe.peace bro!
yeah they can all be a bit confusing, lol. I remember the first time I got one of these and had to run to the far corners of the internet to figure out what it meant!
Well .I'm back !I reinstalled my radio lost all models but found old ones I created a new quad model done everything in there then done everything in betaflight.weird thing was my external happymodel es24 pro I think it's called set to 250mw was revving its fan out (I really wanted to say guts) so it started connecting disconnecting for 10 minutes with the battery plugged in as it won't turn on unless a battery is plugged in its a v1 f7mini fc . So time to repull it apart by the looks .miss ya bro.peace
Very informative and greasy information. 🥓😎
Thank you!! :)
That thumbnail, though! 🔥
lol, I knew immediately that it had to be the double rainbows!
@@BaconNinjaFPV hahahaha 🤣
I would like to see a video of you tuning and testing different props on the Darwin129.
I really do need to get that thing back out and play with it! I have been holding off on it since I stole the ELRS receiver from it a while back, but maybe after I move everything to the new studio I can get put back on it.
Rx_ failsafe throttle msp gps.. is what I got.. and it won't arm but will arm.. when I turn gps off in ports.. kinda puzzled.
I restored the config in betaflight and I did not make a backup and now I get RXLoss MSP CLI and I don't know how to repair it, the control does not connect at all to betaflight
Hello,
I am trying to bind my a Babyhawk 2 O3 ELRS with the Zorro ELRS version. The red light on the receiver is solid and the Zorro even tells me that telemetry is on or when I dosconnect the battery that it's lost. So somehow I think it should be binded.
But I can't arm the drone. Also Zorro does not do anything in Betaflight. Bars don't move. It's just like it is not their.
I am actually sure that I updated the Zorro correctly (ExpressLRS) and I also think that I flasehd the Babyhawk correctly.
Also the RX_Failsafe MSP is in my Systeminfo. But I can not arm the drone to get rid of it
I am trying for over one week now and I do not have any idea how to proceed :/
Can anybody help?
Love me some Bacon Bits 🥓 🐷
never eat a salad without em'!
🎉 miss ta bro 😊
Help me please my new bubito drone doesn’t arm and it’s giving me the throttle msp flag saying the channel is to high Idk what that means please I’ve been trying to do this for 4 hours now
hmmm, so usually an MSP flag means that you have a USB cable attached. I am guessing that you probably don't have one connected right? If that is the case, take it to BF configurator, connect to it, and make sure to hit the disconnect button before unplugging it. As far as the channel high/throttle one, that will mean that it thinks your throttle stick is up further than the bottom of the stick. This can be a couple of things really. First, I would take the time to calibrate your sticks in the radio. Usually that means running the calibration and lightly making circles with the sticks all around the edges so that it can find them. Once you have that, if you are still getting the flag, make sure that in the receiver tab of BF (you will need your radio on and a pack plugged in to see this) you get the correct throttle channel moving when you are moving your actual throttle stick. If that checks out, put your stick all the way down to the bottom and take a look at the number that channel reads. Go to the stick low threshold on the right side of that page, add 50 to the number you got as the low number when the stick was all the way down, and type that in. That should get your throttle arming flag taken care of :)
Hey bacon pick my next 5” freestyle frame 😈
keep that grease a poppin' !