DIY Epoxy Live Edge River Table | Epoxy resin dinning table
Vložit
- čas přidán 13. 04. 2022
- #epoxy #woodworking #table #handicraft
How to make an Epoxy live edge river table with easiest way and with simple tools. The video shown step by step.
Find everything you need to make a resin table like this on our channel.
Table top dimension : 6' x 3'
Wood : Acacia
Hope you enjoy our video. Thanks for watching! 😊
Subscribe and like it.
Shop : www.etsy.com/in-en/shop/Welld...
Email : welldoradecor@gmail.com
Instagram : / welldora_decor
Facebook : / welldora.decor
#resin #epoxy #DIY #woodworking - Jak na to + styl
Very nice table 🎉
Thank you 😊
Beauty-full table. Excelent work.
Greetings from México City 🇲🇽
Big thank you from india 🇮🇳
Awsome build…Awsome video! Seemed to be a family affair. Held my breath when you routed for the logo😂 particularly liked the no frills just gettin it done👍
Thanks brother 🙏 💙
Is there a reason to do the pour after letting each stage dry? Does it make it stronger than doing the pour all at once? Thank you
No, my epoxy has a limits to 10 mm thickness pour in 1 time so that's why
Different resin Different limits
If you buy deep pour you can full fill all at once
Thank you
Beautiful idea 😯😯😯
Nice and clean.
It would be nice to know what you layed the boards on ,what you sanded with and what type of router bit you used.
It's plastic sheet like mold
Sanding
80 to 320 for matt
80 to 4000 grit for gloss finish
Plane router bit i used
Thank you 😊
Polish keliye Bina machine kya use karsakthe
I did a deep pour on a live edge slab. the epoxy seems a little high on one end. I tried sanding with 40/60/80/120/220 but cannot get the side of the hole to be smooth like the rest. any ideas are appreciated?
You can use Leveler to lavel all the top at same level
What this that white base on which you put your wood?
Plastic sheet..
Why remove the bark? Just a preference or does it cause problems?
Customer not need bark so i remove it
Thanks 😊
Why do you sand resin in between layers?
Bcz of grip between two layers
This looks great, how many hours total for one table like this?
15-17 working days
Beautiful!
👆🙌👌 mast h bhai lekin Glossy finesh q nhi ki h???
Ok sirji 👆 👌 👏
Where did you get that wood planer???
I make my own surface leveling mechanism
What do you use for the mould
Plastic sheet
What’s the song called from 9:40 of the video
czcams.com/video/b2O6CGaoTXI/video.html
Tacky
How much does something like this sell for?
1000$
+Shipping
@user-vx4pw9zu8cnah it’s prob more like 2000
Oh great
Where from can we get wood from?
It comes from trees
@@TheCleric42 😂
Go to Saw mills in your city, you will get it
Lots of air bubbles
No way😄
I pop bubbles 🫧
Nicely done! You really should wear better protection, the epoxy curing fumes don't smell but they're a carcinogen. Don't want to get lung cancer.
Yes sure
Thanks for care 😇🥰