Temperature Controlled Fan Using ESP8266 and Blynk IOT
Vložit
- čas přidán 26. 08. 2024
- Temperature Controlled Fan Using ESP8266 and Blynk IOT
Required Components
==================
1. ESP8266
2. DHT11 Sensor
3. Connecting Wires
4. Connecting Cable
Components Link
===============
1. ESP8266 - robu.in/produc...
2. DHT11 Sensor - www.electronic...
3. Connecting Wires - robu.in/produc...
Software Required
===============
1. Arduino IDE - www.arduino.cc...
2. Programming Language - C Language
Source Code
==========
github.com/Tec...
Reference Video of Arduino Experiments
======================================
1. How to Read Data From Spreadsheet and Display in OLED | ESP8266 Projects
• How to Read Data From ...
2. How to Control Bulb and Pump using Blynk IOT | Home Automation | ESP 8266 Projects
• Control Bulb and Pump ...
3. How to Store Temperature Pressure Altitude in Google Spreadsheet | NodeMcu Projects | ESP8266
• How to Store Temperatu...
4. Temperature and Humidity Monitor Using ESP8266 and Blynk IOT | Blynk 2.0 Projects
• Temperature and Humidi...
5. Temperature Pressure and Altitude Monitor using Arduino IOT Cloud and ESP8266
• Temperature Pressure a...
6. Control Electric Bulb Using Blynk 2.0/Blynk IOT | Blynk 2.0 Projects
• Home Automation Using ...
7. Control Water Pump Using Blynk 2.0 / Blynk IOT | IOT Projects | Home Automation
• Smart Irrigation Using...
8. Control LED using Arduino IOT Cloud and ESP8266 | Arduino IOT Cloud Projects
• Control LED using Ardu...
9. Control LED using Blynk 2.0/Blynk IOT using Simple Program | Blynk 2.0 Projects | Node MCU Projects
• Control LED using Blyn...
10. Temperature and Humidity Monitor using Arduino IOT Cloud and ESP8266
• Temperature and Humidi...
11. How to Display Current Date and Time in LCD
• How to Display Current...
12. Top 10 Arduino GSM module projects
• Top 10 Arduino GSM mod...
13. How to interface MPU6050 Accelerometer and Gyroscope Sensor with Arduino Nano
• How to interface MPU60...
14. How to store Temperature data in Google Spreadsheet
• How to store Temperatu...
15. How to Display Temperature, Pressure, Altitude Display in LCD
• Temperature, Pressure,...
16. Rain Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects
• Rain Alert Call and SM...
17. Live Streaming using ESP32 CAM and Blynk App
• Live Streaming using E...
18. How to store temperature data in SD card | Arduino Projects
• How to store temperatu...
19. Object Detection Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects
• Object Detection Alert...
20. Distance Measurement in OLED Display
• Distance Measurement i...
Music: www.bensound.com
♥ Facebook: / techtrendsshameer
♥ Instagram: / tech_trends_shameer
Need more step by step process to understand more for beginners sir my request.
Very nice project dude
Thank you! Cheers!
sir please tell that you connect NO of relay with positive point of fan and COM in positive rail of breadboard ????
what is the volt value of cooling fan? i have 220-240V AC fan. Can i use your video in my project?
I am using 12V fan.
The relay showed in the connection schema is different from the actual physical one. Are you able to show the actual physical connections with the physical components?
Actual relay only has 3 pins, IN, GND, VCC, and 3 insertion points, NO, COM, NC.
I am not getting the similar relay component to draw the circuit
Able to list out how the actual connections to the actual relay used are?@@TechTrendsShameer
Very gud sir
hello sir, I don't have VU in nodemcu. What shall i replace it with? 3v port? or it can't be replaced
Connect to 3V and try.
hiii, your project is fun and cool. may i know it is possible to use a 12v dc fan with a 5v relay?
Yes possible. The specification of the Fan which I am using is below
Voltage: 12 V
Current: 0.15 amp
Power: 3/2.5 W
How to set the tempatature for fan on
You can take me to see if the electrical circuit diagram is connected, but I can't run the fan:
is that 12V DC fan sir?
iya naufal sayang
HI. MY RELAY IS NOT GETTING A SIGNAL TO TURN ON AT MY SET TEMPERATURE, IT JUST KEEPS RUNNING. THE REST OF THE CODE WORKS EVEN THOUGHT ITS DIFFICULT FOR A BEGGINER LIKE ME.
AM I SUPPOSED TO REPLACE THE "FAN_PIN" ON THE SETUP SEGMENT OF THE CODE?
Which library should install in arduino IDE?
Blynk, DHT
Its that button at your DHT11?
@@FFareesHaziq Didnt get you. DHT is a library.
iya sayang
why we use relay
Can we use ESP32 Instead??
Yes. Need some changes in code.
Sir it. Is showing offline how do I connect
Check the connection
Fan on and off avilable oor not
In this program the fan will ON Automatically. There is no manual ON and OFF.
Sir i have facing some error in the code
May I know the error message?
Whic software your using sir for curuit connection
Fritzing
@@TechTrendsShameer but i didn't get how to do it can u snd me the link plz😊🙌
fritzing.org/download/
No such directory its comming
Install the libraries
Bro can u snd the correct code its not working
What is the error ?
@@TechTrendsShameer el ventilador no se prende o apaga de acuerdo con la condicion if
Please check your connection with Relay.
Here is another video of iot fan
czcams.com/video/Z9QPlyxhtik/video.html
Brother whts wrong with u , do send valid links of the product, i ordered frm the link , but the jumper wires we got is different ,, guys don't buy frm this link buy frm somewhere else
If you got wrong product, check with the contact number or customer support of that website. Also check the product description before order.