Velikost videa: 1280 X 720853 X 480640 X 360
Zobrazit ovladače přehrávání
Automatické přehrávání
Přehrát
Same pump, same issue.I was exactly looking for this jugaad… thanks!
Today is 24thJuly2023. Thank you ❤
this video helped me to fix my foot pump air hose, thank you very much from sri lanka🇱🇰
Financial Emergency in your country..🤨
mkdda use karapu hose eka gas batayakda
What a cute video, big like 😊
Thank you 🤗
While refitting you need new grips and it is better to purchase new hose in market already crimped from both sides.
What are those grips called and what is the name of the tool needed to crimp the collars on properly?
The clamps at either end of the hose can be replaced with worm-drive hose clamps, which fit on easily and tight.
yes, very good suggestion, thank you very sir.
@Johny ku Thanks, great video in less than 2 minutes. What clamp was used to fix the 2 connectors
Thks, I use back the original clamp or you can buy new hose clamp
Nice,bookmarked the video👍
thank you
Were they called Hex Collars, the metal bits around the hose at both ends to keep it air tight? Is it called a Hex collar crimp tool to tighten them?
Hello.. I use normal plier to press. But if still the air leak, you can try steel wire to twist it. More fit. Thank for watching my video
Awesome!
I have the red and black now its to look for a new one cause I now know its fakeThx
what crimp you use?
I tried squeezing the clamp with regular pliers, but air was leaking out. I believe you need special hex tool to lock this type of clamp.
Thanks for the comment, maybe your air nipple connector and air hose a bit loose, so you can put Teflon tape at the air nipple connector.
@@johnyku3034 Thanks for the video. I ended up removing the old clamp completely and used steel wire instead of the clamp, i twisted it on two sides of the hose, and it worked really well.
@@KaijuClayClub happy to hear from you to do other way.
Bos beli klep ya dimana.... Kalau punya sy klep ya plastik
I have the similar pump as yours, but mine starting to see some oil leak from the canister. Any idea how to fix it?
A lot? Or maybe the grease oil melts?
@@johnyku3034 not alot, just a little bit .
How to press the grip?
use steel Plier to press.
Nice! Where can you buy hose like that?
can get at Hardware shop/Store
Gas
How did you remove the grip
Use as small skrew driver size to push it out the grip, imagine an act as if you are taking out a muffin from the muffin cup😊
what size are the fittings and the hose? are they 1/4"?
well done! is it the same hose for the gas stove?
yes, ur right. but you can use other air pressure rubber hose too.
Its called braided hose
@@johnyku3034 inner diameter also same?
@@sawpwinchester6824 yes, same. but smaller a bit is the best to fit in the Air nipple.
Tyty
Where do you but the stuff for repair??
sory what you mean?
@@johnyku3034 I think he/she meant to ask where did you purchase the items you used from?
@@elibeli70 thank you my friend
Pipe change kaise karni hai yeh to bata dete
Shop kha hai aap ki
can get any hardware shop
Same pump, same issue.
I was exactly looking for this jugaad… thanks!
Today is 24thJuly2023. Thank you ❤
this video helped me to fix my foot pump air hose, thank you very much from sri lanka🇱🇰
Financial Emergency in your country..🤨
mkdda use karapu hose eka gas batayakda
What a cute video, big like 😊
Thank you 🤗
While refitting you need new grips and it is better to purchase new hose in market already crimped from both sides.
What are those grips called and what is the name of the tool needed to crimp the collars on properly?
The clamps at either end of the hose can be replaced with worm-drive hose clamps, which fit on easily and tight.
yes, very good suggestion, thank you very sir.
@Johny ku Thanks, great video in less than 2 minutes. What clamp was used to fix the 2 connectors
Thks, I use back the original clamp or you can buy new hose clamp
Nice,bookmarked the video👍
thank you
Were they called Hex Collars, the metal bits around the hose at both ends to keep it air tight? Is it called a Hex collar crimp tool to tighten them?
Hello.. I use normal plier to press. But if still the air leak, you can try steel wire to twist it. More fit. Thank for watching my video
Awesome!
I have the red and black now its to look for a new one cause I now know its fake
Thx
what crimp you use?
I tried squeezing the clamp with regular pliers, but air was leaking out. I believe you need special hex tool to lock this type of clamp.
Thanks for the comment, maybe your air nipple connector and air hose a bit loose, so you can put Teflon tape at the air nipple connector.
@@johnyku3034 Thanks for the video. I ended up removing the old clamp completely and used steel wire instead of the clamp, i twisted it on two sides of the hose, and it worked really well.
@@KaijuClayClub happy to hear from you to do other way.
Bos beli klep ya dimana.... Kalau punya sy klep ya plastik
I have the similar pump as yours, but mine starting to see some oil leak from the canister. Any idea how to fix it?
A lot? Or maybe the grease oil melts?
@@johnyku3034 not alot, just a little bit .
How to press the grip?
use steel Plier to press.
Nice! Where can you buy hose like that?
can get at Hardware shop/Store
Gas
How did you remove the grip
Use as small skrew driver size to push it out the grip, imagine an act as if you are taking out a muffin from the muffin cup😊
what size are the fittings and the hose? are they 1/4"?
well done! is it the same hose for the gas stove?
yes, ur right. but you can use other air pressure rubber hose too.
Its called braided hose
@@johnyku3034 inner diameter also same?
@@sawpwinchester6824 yes, same. but smaller a bit is the best to fit in the Air nipple.
Tyty
Where do you but the stuff for repair??
sory what you mean?
@@johnyku3034 I think he/she meant to ask where did you purchase the items you used from?
can get at Hardware shop/Store
@@elibeli70 thank you my friend
Pipe change kaise karni hai yeh to bata dete
Shop kha hai aap ki
can get any hardware shop