For anyone that wants a larger than their phone screen for the RCN1 controller but is afraid of it being too heavy as Billy mentions, I use an iPad mini 6 with Drone Valleys extension and I love it. It’s not too heavy and I don’t even use the optional lanyard mount with it.
There is no question, that for the Air 2s, the DJI RC is giving me better signal the the RCN1. After 1 and a half years of continued use of the RCN1, I am getting far less drop outs once I made the switch to the DJI RC. The main reason to get the DJI RC is for its convenience of a dedicated screen but the better signal was an unexpected benefit. I am not sure what others are experiencing when paired with the Air 2s but this is my experience after using the DJI RC for the last 3 months.
Great controller comparison! Covered features, range, ergonomics. A few Specs of interest I am adding are battery life and transmission POWER + Bonus (Screen Brightness). Controller Battery Run Time Transmission Power Screen Brightness RC-N1 6 Hours 398mw (.4 watt) Phone dependent RC (RM330) 4 Hrs (approx) 398 mw (.4 watt) 700 Nits RC Pro (RM510) 3 Hours 1995mw (2 watts) 1000 Nits RC PRO is the BEAST but you pay for it in run time! Get yourself a matte glass screen protector and fingerprint smears and reflections will be a thing or the past! Thanks Billy.
Great video, Billy, but I think the lack of cellular connection should have been brought up. If you need to unlock Geo-zones while using the RC or Pro, it's a real pain to connect to your phone, boot up the app in the phone, unlock the geo-zone, then go back into the RC/Pro and pray that this unlock works. This is a huge miss by DJI since they're the only manufacturer that treats their customers like children with geofencing. I love DJI products in general, however, this is a left hand not working with the right hand issue for sure. If you do industrial or real-estate jobs Part 107 and try to use the RC or Pro remotes, it's a show-stopper when you run into the geo-zone unlock problem. It only works about 50% of the time from my experience. Keep it up, buddy!
good point and interesting to read. Can you not receive an unlock ahead of time for the job? I HATE dji's geofencing. However it appears there is no viable alternative currently.
The RC-PRO would be my preference, but I don't have a compatible drone. I'm still flying my loveable Mavic 2 Pro. Billy, your drone related videos are PACKED with tons of information and it is a delight whenever you drop a new one. You are the best man! Stay flying. 👍
Its a shame the DJI Smartcontroller that came with the Mavic 2 doesn't work (yet?) with Mini 3 or Mavic 3, though they did release firmware to make it work with Mini 2, and it can update the DJI Fly app to latest
great comparison info! I love my RC Pro, but I did enjoy the lightweight feel and similar functionality of the RC when you were up here in RI, so thank you for allowing me a quick test flight of the Mini 3 Pro with that controller
RC can also download maps, as mentioned for the RC Pro. I haven’t experienced range issues with the RC but it is important to keep the antennas (top edge of RC) pointed generally toward the drone. Great job with the comparisons.
Hello, I bought a Mavic 3 recently; it came with the stock RC-N1 controller. I have good range but the flight experience has been disappointing because when I try to manually follow a subject the aircraft is not as smooth as other drones and is very difficult to stay on point. I have tried over and over to adjust the controller settings to improve this but has not worked. I fly with the Tripltek 8 monitor which to me is one of the best. I finally figured out there is a millisecond delay when using the Tripltek with the RC-N1! I set up a test in my house and I can see a visible delay when moving my hand or snapping my finger in front of the camera. This to me would cause the tracking problem when trying to follow a subject because the subject is moving and every action I do is a fraction behind of where it should be. On the other hand, I have a Mini 3 Pro and I used the DJI RC from that drone and paired it with the Mavic 3. NO DELAY observed! No one on CZcams that I know has mentioned this in their videos when making controller comparisons. I think this may be important information if other people are experiencing this.
@billykyle The RC Pro has a capability of adding a DJI LTE Dongle to the rear bottom compartment. Mine has a T-Mobile SIM ensuring I'm connected to the web wherever connectivity exists. While this puts the controller about another $200 US higher in cost, the convenience of this add on is serving to none (yes, I enjoy it a lot). It has to be ordered from overseas, but it does work extremely well.
RE the DJI RC. I fully agree with your thoughts on the signal strength. I installed the Alientech external antenna mod (Pro refit bracket)and it increased my signal strength a lot. Even using the Alientech "stubby" (quick release) antennas the strength was much better. 4Hawks also makes a external antenna mod kit that I'm told is also good..
I would love the RC Pro but the price is just way too high for me. I decided I was going to get the N1 because my phone has a better display and I can just get the files (or even the previews) straight away on my phone. I don't find I am particularly bothered by connecting my phone, usually the controller and drone aren't even paired by the time I get the phone connected.
RC here for my A2S. It saves time for a launch because there is no cable to the phone or ipad. And no bulky awkward bracket for an ipad. The added functionality billy talked about alone is worth the $310.😊
@@drewpgambino3644 thanks! I feel like upgrading from my air2s to Mavic 3 pro, because the new tele lenses are exactly what I miss and the RC seems like the right remote. The rc pro is just too pricey.
Yes the M3P is my next move…Im glad I waited as I came pretty close to buying the Classic. One thing DJI has taught us is that the next offering is usually just months away.
@@drewpgambino3644 I guess it will be different if you live in US, but I just found that in EU drone over 900g really sucks as you will end up in another category..
In UK we have weak CE transmission , so I bought the rcn1 controller, added the FCC patch to my mobile phone, its smaller and like you said has better signal , using plus batteries 🔋, happy all round package 📦 😀 😉 👍 👏 😜
Thanks for this comparison. I just recently purchased the new RC, I'm really enjoying it. Maybe one day I'll be able to justify moving up to the RC Pro.
RC is the way to go but the Pro is awesome but that price point for many just don't make any sense (for many). But I would add, the signal situation is only evident in the Mini 3 Pro... Signal is great or better when using the M3 line with the RC over then N1 RC. That's from my own testing out here in New York city. All in all great comparisons as always Billy. Happy you finally got a Samsung phone 😁
A nice straight to the point description, I cheaped out out first and just bought Mavic 3 with regular N1 controller as had no option even though I already had N1 that came with Mini 2, but Mini 3 Pro I waited and got just the Drone, only a week ago I bought the RC PRO (cost £79 less too) so for me it worked out fine by waiting as RC PRO now works with Mini 3 pro and really those are the main 2 drones that I like to pack which cover most flying situations. As for N1 controller it's good for a backup. Hated attaching phone so much easier now especially with the extra controls.
Great review. One added note is that I believe the RC remote is not set up to work with the Mini 2, much to my chagrin as I just purchased a Mini 2 as a backup to my Air 2s. Had hoped the RC remote and the Mini 2 would be the ultimate small to carry package. No big deal as I still have my RCN1 remote with my iPad mini, so that will be the controller for the Mini 2. Will DJI upgrade the RC controller to work with Mini 2? Probably not since the launch of the Mini 3. Oh well, I will still keep my fingers crossed.
Thanks for the video. I've always wanted a controller with an integrated display, but what stops me is that the joysticks are above the display, and I guess that's just as much of an annoyance for full-screen visibility. I don't know why I don't see many complaints about it. For me, it is the number 1 factor when buying a built display controller. It would be good if they put on the market a version with the screen or in the middle like the one on the Autevo that has or one with the controls below and the display on top. Once again thanks for your contributions brother
You should try one, you’ll discover that the width of the controller means that your hands really don’t cover up any of the screen, unless you have truly massive hands or something. As billy said the screen below means the weight is nicely centralised, a screen on top would be unnecessarily bulky and wouldn’t be much of an improvement imo
Also you can see at 4:07 that the screen isn’t edge to edge, it does have a bezel around it, so the screen isn’t actually as big as you think it is. Also main reason there aren’t more complaints about it is that everyone that has it isn’t complaining
Not mention in this video but i prefer the RC Plus. I use the DJI RC smartcontroller for my Mini 3 Pro and also for my Mavic 3 Pro. Perfect controller for a small price
So, only RC Pro can be used (but not controlled?) with an IPad as monitor? I really like using an iPad Pro 12.9. The poor signal of the RC has me questioning my selection when I bought the M3C.
One little reviewed feature of the RC Pro is the button combination feature. The the 5 way stick, C1, C2 buttons and scroll wheel have different functions when holding the back button. You can also use the scroll wheel to pull focus and adjust aperture or exposure. If the feds ever pull their heads out of their butts and take DJI off the "entity list", we'll also get 4G functionality with the RC Pro that'll not only allow you to connect it to cellular without using a Hotspot but will also allow us to control the drone at potentially unlimited range with less concern for signal loss. The last feature is FPV Live which shares the DJI Goggles feed to the RC Pro... I've gotten it to work, just in case some of you can't! Hahaha!
I'm literally with OriginalDobo and texting Billy Kyle right now, I know, I'm name dropping, but I'm also at CES and was at Commercial UAV last fall. I'm well aware they are two different models, I'm not arguing that. You're arguing that you can't use the RC Pro with the Pilot app...
@Jellan Wait... I'm big enough to admit when I'm mostly wrong. I was able to make it work with beta firmware but in general, apparently it doesn't work. My apologies. I'm going to edit that out because I don't want to spread incorrect info. Reminds me of when we were flying the Air2s with the Motion Controller and FPV Goggles from the DJI FPV Drone... "What do you mean they don't work, I was just using them! " Hahaha! Again, my apologies.
I have all 3 remote at the same time. My most favorite remote is RC. It's lightweight, best ergonomic and stick resistance is just perfect for me. RC Pro stick is too sensitive for me to hold it position.
@@timelapsebylkunl72 it tightens the spring so there will be less jerkiness with the sticks and they will return back to their normal position much slower and are stiffer to move Never tried it but I’d imagine that would happen because they’re spring loaded So to answer your question It’ll be up, down, LEFT and RIGHT All directions
Skydio is from years ago the parameter to knows how others drones are working, not only in tracking. Is better for beginners, also ti fly between obstacles with the RC and the quality of the image is awesome
Curious to know what they're like in hand and the difference between the screen on the top, compared to the built in ones at the bottom...do your hands obscure?
I like the DJI RC but had to send it back with the Mini 3 Pro due to massive jello in the video footage. I either got a lemon or a damaged gimbal. I decided to go with the RC-N1 and a Mini 3 Pro on my next buy which I'm waiting on now. Because I have a Tripltek 7 Pro I decided I liked the brighter and bigger screen than the DJI RC offered. I did like the convenience of the DJI RC though. I do wish the Android OS was open like the DJI RC Pro. The RC Pro is definitely the better RC and the price reflects that. I may save up for one if it continues to be compatible with current and future DJI camera drones.
The DJI RC was so laggy when compared to using my cell phone that I opted to sell it and stay with the N1. The inconvenience oh having to use my phone is much less annoying than lagging between every settings change. I’ve never had an overheating or brightness problem. Also my phone is brighter than the RC built in screen.
Thank for the video! I have a question, what about if someone call while using the rc n1 with a phone? Would that interrupt the flight? In which mode should the phone be before using it with the drone? Thanks again!
WoW! Really! That was a good deal. When I heard I didn’t want to look at the cost difference since I already had the A2S. DJI should really drop that RC Pro price. So what was the upcharge with the RC Pro combo?
Many thanks for sharing; just one comment, the the RC controllers "stick sensitivity" is appalling!!!; there is no real resistance and makes it vey hard to get smooth video!
Hello, good day. I am considering buying either a DJI RC or a DJI RC Pro. The primary factors for me are image quality and brightness. I’ve noted that the DJI RC Pro is roughly triple the price of the DJI RC, so I’m hoping to get an expert’s view on the tangible differences in image quality and brightness between the two controllers. If the DJI RC Pro only offers a 10 or 15% improvement, I may not find it worthwhile to spend an extra 600 euros. In your experience, is the image quality and brightness of the DJI RC Pro significantly better, or is the DJI RC just as good in any given situation, thus making the Pro version not worth the additional cost? Thank you in advance.
Hi Billy I want to use the hdmi out for broadcast video with the RC Pro Can you confirm that once the hdmi is connected that 1080i and 1080p allow 59.94 frame Rate, that is the current Standard most broadcasters use. You're videos are great Thanks for sharing!
The RCN1 has a major flaw. If you fly full pitch forward the stick does not lock into place but wanders left or right and the drone ends up rolling left or right. This does not happen with the mavic mini transmitter or DJI RC or any of the many toy quadcopter transmitters I've used in the past.
The RC n1 gives me the option to use offline maps but without data and GPS connection I can't use the app, I was under the impression that idea off offline maps was for when you had no data WiFi or GPS connection. So in my opinion this function on this remote is a waste of time and without WiFi, data and GPS connection your limited where you can fly.
Hello, does the RCN1, that will work with the iPhone, so I guess you can fly the drone with Dronedeply app, so could the Mini 3 Pro work for mapping? Thank you for sharing.
Billy, my Mavic 3t enterprise has the Pro RC (Pilot 2) and my Mavic 3 Classic came with the regular RC (DJI Fly). Can I load DJI Fly onto the Pro RC and use that controller when flying either drone? Will I have to re-bind each flight or will they just work since the software for each is different? Really enjoy your videos!
really appreciate you pointing out the range on these!!! that right there is what makes this video stand out!! N1 it is for me! i have the Mavic pro 2 with smart controller and there is no way that I'm spending $1200 on a new controller for my new dji 3 mini pro lol- I do wish they were backwards compatible and i could use use my old smart controller with my mini 3 pro :( thank you so much
Why not just get the iPad Mini and use it as your screen. I totally get you on the iPhone over heating in the sunlight. I ended up buying a screen cover to shade it from direct sunlight. I wonder if Apple will ever make an iPhone that will not overheat? Looking forward to the iPhone 15 coming out soon, but not getting my hopes up on the overheating in direct sunlight.
Great video! Curious you mentioned getting a samsung galaxy fold to use for the flight screen...is the controler able to handle that phone when unfolded? I have a fold too and would be amazing to have all that screen real-estate if possible!
You said you for a galaxy fold to use with the N1, does it fit in the controller when opened? I have the fold4 which is much larger, but the outer screen is decently usable, just heavy. Does the phone pair with the controller to get the video stream?
Great overview of the current DJI controllers. There all very good controllers, and each fits the needs and budgets of different users. I prefer to use the RC Pro, the only down side is the size and weight, it's a very minor con. Thanks for sharing.
I would like to fly my air2s with the motion controller and use the headset from my avata. I have a avata but it would be nice if I could fly the air2s the same way.
What I wanna know if there is any difference in stick sensitivity between the remotes. It seems like there is as my friend flies his M3 with the RC Pro and to him he said the sticks on my RC-N1 feels more sensitive. We looked at the gain and expo settings which for both M3s are still stock yet he was having difficulty doing slow cinematic shots on my RC-N1
@Billy Kyle I have a friend that flies his M3 with the RC Pro and when he tried to fly my M3 with my RC-N1 he said the sticks seem super sensitive. I have not touched the gain and expo settings and he compared it to his and they are both at default settings. "Ya man your sticks on that standard controller is super sensitive that I'm having a hard time trying to fly your M3 smoothly. I just flew mine a few days ago and no problems....it's not sensitive like your controller"
its a shame you do not touch more on the programmable buttons on the pro controller as for me those are one of the highest selling points. being able to adjust all camera aspects without taking my hands off the sticks is huge. like you can program c1 to something if you push it if you hold it down you can adjust something else with one of the wheels and so forth.
I installed the Alientech external antenna mod (Pro refit bracket)and it increased my signal strength a lot. Even using the Alientech "stubby" (quick release) antennas the strength was much better. 4Hawks also makes a external antenna mod kit that I'm told is also good.. I also have a RCN1 and installed a Alientech antenna refit bracket on it. Much better signal strength...
Looking at the button layout, it seems DJI removed a lot of buttons from the mavic 2 controller, and let you buy them back for $1000. It's essentially a mavic 2 controller with a screen
Most experienced Mr. Billy K... does the RC-N1 really work with the DJI Mavic 3 PRO? I'm planning to get this Mavic 3 Pro and trade in my Mavic 3 but I would like to keep the RC-N1 (I own the RC Pro, but sometimes I like to fly using my iPad as screen...) and trade in the RC which comes with the Mavic 3 PRO... and is the DJI MAvic 3 PRO officially classified as C2 drone? Thank you for an answer... regards from the Netherlands and take care!
Biggest reason not to get the RCN1 controller: Lack of support from DJI. Having purchased an OSMO Mobile and NEVER ONCE SEEING IT UPDATE TO BE COMPATIBLE WITH A MODERN PHONE AND UNUSABLE WITH THEIR APP, I'd be afraid of that controller being a brick the moment a phone OS update is pushed, with DJI just throwing up their hands and saying "Not our fault. We've chosen not to provide further update support."
I'm bummed that the RC Pro Enterprise can't work with the Mini 3 Pro, I'd really like to not have 2 different controllers if I decide to get a Mini drone to fly when I don't want to fly my M3T!
I own both the RC and the RC-n1. One came with my mini 3 pro and one with my Air 2s. I have never used the RC-n1 other than to update the firmware to make the Air 2s work with the RC, so I don't know what a better range even looks like! Ahh ignorance truly is bliss!
Can you have more than one controller bind to a drone? I know you can use one controler for multiple drones. You said about switching controllers depending on your flight.
Thanks for this useful video. Question I have is I’m thinking about buying either the M3C or the M air 2s I am Coming from the mavic mini 😊 which one would you suggest? I am a very infrequent flyer hoping to use the drone more frequently. Thanks for any input.
Billy you’re the best! Thank you for that excellent comparison video and thank you for pointing out the shortcomings of the RC in the all important connectivity category. I would love to “upgrade” to the RC from my standard remote but the weaker signal is a deal breaker for me despite the fact that it has the built in screen. Hopefully DJI will remedy this in its next version of the RC and keep it affordable at the same time🙏
nice comparison on the remotes. Are the RC and the RC pro gonna be compatible with the upcoming remote ID rules (since there is no phone attached to broadcast the position of the drone)? Can the RC still be used with a phone to use other apps like litchi or mapping software?
I'm curious to see if DJI release's the Air 3 this year, I assume they would make the upgrade to O4 transmission. I wonder if they will release a new controller with it that will run on O4; or if it will be like the Air 2S running on the original Smart Controller and be even worse lol
Hya Bikkie, Wish you made this video using the RC 2 which cme out later. I found the rc 1 ws only 200 meters short of the RC pro. Also the RC 2 where I am runs a littler further but there re a few trees at times. So it is not totally fair but the RC 2 is great at the reduced price. I wonder if they will somehow make the RC 2 able to use the Mavic 3 & Mini 3 Pro. As I see the transmitter does not run a simialr version so maybe never, I sold my mini 1 s it has not furure to me now. Next the Mini 2 is going as well. I still love the Mini 1 Pro, Mini 2 Hasselblad, Mini 3 Pro, Mavic 3, And Mini 4 Pro. Those I will NEVER sell as I hav every extra, vd filters and many batteries for each. I did get the NV filter for mavic 3 Classic. The batteries were terrible for the Classic so I got 2 from an ebay seller. After using 50 % battery on both they registered 1 charge. So at $ 149 & a second one at $139 I got 2 of his and free shipping. Drone super store is on eBay, now down to $132 for this ABSOLUTELY "DJI" REAL battery. and he is great on many other batteries I own for years as well not fake but REAL DJI!! The fellow is amazingly honest. Listed as not new but they sure were!!! I also bought the single charger as I have 2 65 watt charger, IDJI & 1 from RICK Drones Valley. So I save a bundle as they were getting way too much from the biden jerk screwing with out money etc, etc. Back to the point I would like to see what you have to say on the RC 2 s all the later updates are on it from DJI for Christmas so that was sweet of them. I will visit them next time I go to China as a friend works there in Shenzhen. I have a lot of respect for that older Mavic 2 Pro with Hasselblad. That drone is incredible just for what it could do way back when. I know the Mavic 3 has a lot more features but that old Mavic 2 Pro is something!!! I have used the Lenovo tablet (64 bit Must) with all my older drones. It is purrrrrrrrrrrrrrrrrrfect with the right I/O cable from Drone Valley Ray C. in Florida
For anyone that wants a larger than their phone screen for the RCN1 controller but is afraid of it being too heavy as Billy mentions, I use an iPad mini 6 with Drone Valleys extension and I love it. It’s not too heavy and I don’t even use the optional lanyard mount with it.
I need a bigger screen for sure. Where can I get the Drone Valleys extension and is it an easy hookup? Thanks
There is no question, that for the Air 2s, the DJI RC is giving me better signal the the RCN1. After 1 and a half years of continued use of the RCN1, I am getting far less drop outs once I made the switch to the DJI RC. The main reason to get the DJI RC is for its convenience of a dedicated screen but the better signal was an unexpected benefit. I am not sure what others are experiencing when paired with the Air 2s but this is my experience after using the DJI RC for the last 3 months.
Official billy klyes giveaway package 🎁🎁🎁🎁🎁
I also have an Air2S and I have empirically proven that the RC radio signal is better than RCN1.
@@josemiguelpalmer9004 Exactly. Everyone assumes that the signal is lower because of the lack of external antennas. My experience proves otherwise.
There are a lot of comparison videos on CZcams from what I have seen the N1 Controller has a slightly better connection than the RC controller
Great controller comparison! Covered features, range, ergonomics. A few Specs of interest I am adding are battery life and transmission POWER + Bonus (Screen Brightness).
Controller Battery Run Time Transmission Power Screen Brightness
RC-N1 6 Hours 398mw (.4 watt) Phone dependent
RC (RM330) 4 Hrs (approx) 398 mw (.4 watt) 700 Nits
RC Pro (RM510) 3 Hours 1995mw (2 watts) 1000 Nits
RC PRO is the BEAST but you pay for it in run time! Get yourself a matte glass screen protector and fingerprint smears and reflections will be a thing or the past!
Thanks Billy.
Great video, Billy, but I think the lack of cellular connection should have been brought up. If you need to unlock Geo-zones while using the RC or Pro, it's a real pain to connect to your phone, boot up the app in the phone, unlock the geo-zone, then go back into the RC/Pro and pray that this unlock works. This is a huge miss by DJI since they're the only manufacturer that treats their customers like children with geofencing. I love DJI products in general, however, this is a left hand not working with the right hand issue for sure. If you do industrial or real-estate jobs Part 107 and try to use the RC or Pro remotes, it's a show-stopper when you run into the geo-zone unlock problem. It only works about 50% of the time from my experience. Keep it up, buddy!
DO you not need to unlock for the RC-N1?
good point and interesting to read. Can you not receive an unlock ahead of time for the job?
I HATE dji's geofencing. However it appears there is no viable alternative currently.
I was looking for a comment like this. I used to have the Phantom 4 Pro+ and I'll never do a built-in screen again for this exact reason.
The RC-PRO would be my preference, but I don't have a compatible drone. I'm still flying my loveable Mavic 2 Pro. Billy, your drone related videos are PACKED with tons of information and it is a delight whenever you drop a new one. You are the best man! Stay flying. 👍
Its a shame the DJI Smartcontroller that came with the Mavic 2 doesn't work (yet?) with Mini 3 or Mavic 3, though they did release firmware to make it work with Mini 2, and it can update the DJI Fly app to latest
great comparison info! I love my RC Pro, but I did enjoy the lightweight feel and similar functionality of the RC when you were up here in RI, so thank you for allowing me a quick test flight of the Mini 3 Pro with that controller
I have the RCN1 and RC and definitely think each have their pros and cons.
RC can also download maps, as mentioned for the RC Pro. I haven’t experienced range issues with the RC but it is important to keep the antennas (top edge of RC) pointed generally toward the drone. Great job with the comparisons.
Hello,
I bought a Mavic 3 recently; it came with the stock RC-N1 controller. I have good range but the flight experience has been disappointing because when I try to manually follow a subject the aircraft is not as smooth as other drones and is very difficult to stay on point.
I have tried over and over to adjust the controller settings to improve this but has not worked. I fly with the Tripltek 8 monitor which to me is one of the best.
I finally figured out there is a millisecond delay when using the Tripltek with the RC-N1!
I set up a test in my house and I can see a visible delay when moving my hand or snapping my finger in front of the camera. This to me would cause the tracking problem when trying to follow a subject because the subject is moving and every action I do is a fraction behind of where it should be.
On the other hand, I have a Mini 3 Pro and I used the DJI RC from that drone and paired it with the Mavic 3. NO DELAY observed!
No one on CZcams that I know has mentioned this in their videos when making controller comparisons. I think this may be important information if other people are experiencing this.
@billykyle The RC Pro has a capability of adding a DJI LTE Dongle to the rear bottom compartment. Mine has a T-Mobile SIM ensuring I'm connected to the web wherever connectivity exists. While this puts the controller about another $200 US higher in cost, the convenience of this add on is serving to none (yes, I enjoy it a lot). It has to be ordered from overseas, but it does work extremely well.
RE the DJI RC. I fully agree with your thoughts on the signal strength. I installed the Alientech external antenna mod (Pro refit bracket)and it increased my signal strength a lot. Even using the Alientech "stubby" (quick release) antennas the strength was much better. 4Hawks also makes a external antenna mod kit that I'm told is also good..
I would love the RC Pro but the price is just way too high for me. I decided I was going to get the N1 because my phone has a better display and I can just get the files (or even the previews) straight away on my phone. I don't find I am particularly bothered by connecting my phone, usually the controller and drone aren't even paired by the time I get the phone connected.
Got all 3,, and everything you said on this video about them is 100% correct!!! I just hate they took the mini 2 off of the R.C Pro...
RC here for my A2S. It saves time for a launch because there is no cable to the phone or ipad. And no bulky awkward bracket for an ipad. The added functionality billy talked about alone is worth the $310.😊
@@mb-bp1eb have yet to experience a brightness problem and I use it A LOT. My DJI flight report for 2022 said I fly more than %96 of their customers.
@@drewpgambino3644 thanks! I feel like upgrading from my air2s to Mavic 3 pro, because the new tele lenses are exactly what I miss and the RC seems like the right remote. The rc pro is just too pricey.
Yes the M3P is my next move…Im glad I waited as I came pretty close to buying the Classic. One thing DJI has taught us is that the next offering is usually just months away.
Right on
M3P it is
@@drewpgambino3644 I guess it will be different if you live in US, but I just found that in EU drone over 900g really sucks as you will end up in another category..
In UK we have weak CE transmission , so I bought the rcn1 controller, added the FCC patch to my mobile phone, its smaller and like you said has better signal , using plus batteries 🔋, happy all round package 📦 😀 😉 👍 👏 😜
What's the Fcc patch?
@@dishxpert don't you know how to search ??????????
@@kamikazekaos for important things I use ChatGPT. It gives me the answer faster than you and Google.
@@kamikazekaos rather rude answer to a legit question.
@@MysticalDragon73 is this your first time in the comment section?
Nice review but no discussion of aircraft compatibility with each controller?
Don’t forget to mention the battery the RC-N1 battery last twice as long as both them other controllers and it chargers way faster
Yup definitely better on battery, and it more portable. I will take the built in screen all day long though
I appreciate the break down. Seems having both RCN1 an RC wont be bad idea.
Thanks for this comparison. I just recently purchased the new RC, I'm really enjoying it. Maybe one day I'll be able to justify moving up to the RC Pro.
RC is the way to go but the Pro is awesome but that price point for many just don't make any sense (for many). But I would add, the signal situation is only evident in the Mini 3 Pro... Signal is great or better when using the M3 line with the RC over then N1 RC. That's from my own testing out here in New York city. All in all great comparisons as always Billy. Happy you finally got a Samsung phone 😁
A nice straight to the point description, I cheaped out out first and just bought Mavic 3 with regular N1 controller as had no option even though I already had N1 that came with Mini 2, but Mini 3 Pro I waited and got just the Drone, only a week ago I bought the RC PRO (cost £79 less too) so for me it worked out fine by waiting as RC PRO now works with Mini 3 pro and really those are the main 2 drones that I like to pack which cover most flying situations. As for N1 controller it's good for a backup. Hated attaching phone so much easier now especially with the extra controls.
Great review. One added note is that I believe the RC remote is not set up to work with the Mini 2, much to my chagrin as I just purchased a Mini 2 as a backup to my Air 2s. Had hoped the RC remote and the Mini 2 would be the ultimate small to carry package. No big deal as I still have my RCN1 remote with my iPad mini, so that will be the controller for the Mini 2. Will DJI upgrade the RC controller to work with Mini 2? Probably not since the launch of the Mini 3. Oh well, I will still keep my fingers crossed.
Thanks for the video. I've always wanted a controller with an integrated display, but what stops me is that the joysticks are above the display, and I guess that's just as much of an annoyance for full-screen visibility. I don't know why I don't see many complaints about it. For me, it is the number 1 factor when buying a built display controller. It would be good if they put on the market a version with the screen or in the middle like the one on the Autevo that has or one with the controls below and the display on top. Once again thanks for your contributions brother
I've gotten used to the joysticks above. It kind of helps balance the weight.
You should try one, you’ll discover that the width of the controller means that your hands really don’t cover up any of the screen, unless you have truly massive hands or something. As billy said the screen below means the weight is nicely centralised, a screen on top would be unnecessarily bulky and wouldn’t be much of an improvement imo
Also you can see at 4:07 that the screen isn’t edge to edge, it does have a bezel around it, so the screen isn’t actually as big as you think it is. Also main reason there aren’t more complaints about it is that everyone that has it isn’t complaining
Not mention in this video but i prefer the RC Plus. I use the DJI RC smartcontroller for my Mini 3 Pro and also for my Mavic 3 Pro. Perfect controller for a small price
The old DJI “Smart Controller” is not compatible with the Mini 3 Pro or Mavic 3 Pro
Excellent comparison! So many youtube videos are incomplete, inaccurate or just plain wrong. This is thorough and honest re the pros and cons of each.
Thanks for taking the time to help all of us.
So, only RC Pro can be used (but not controlled?) with an IPad as monitor? I really like using an iPad Pro 12.9. The poor signal of the RC has me questioning my selection when I bought the M3C.
One thing Billy you did not mention that the pro has a place in the back to put in a dongle for data sim card
Yup. Forgot that. Not sure how much use this will get with FAA restrictions here in the United States, though.
Can you see the DJI RC screen OK with Polarized Sunglasses on?
Great video. Would you be able to do a video on RC Pro controller HDMI hookup to external screen? I been trying to figure that out. Thanks.
One little reviewed feature of the RC Pro is the button combination feature. The the 5 way stick, C1, C2 buttons and scroll wheel have different functions when holding the back button. You can also use the scroll wheel to pull focus and adjust aperture or exposure. If the feds ever pull their heads out of their butts and take DJI off the "entity list", we'll also get 4G functionality with the RC Pro that'll not only allow you to connect it to cellular without using a Hotspot but will also allow us to control the drone at potentially unlimited range with less concern for signal loss. The last feature is FPV Live which shares the DJI Goggles feed to the RC Pro... I've gotten it to work, just in case some of you can't! Hahaha!
No, the Enterprise RC Pro controller is different to the RC Pro. Only slightly, but enough to make them incompatible. Very annoying decision from DJI.
I started to argue with you but decided not to waste my time. I'm fine with you thinking whatever you wish.
I'm literally with OriginalDobo and texting Billy Kyle right now, I know, I'm name dropping, but I'm also at CES and was at Commercial UAV last fall. I'm well aware they are two different models, I'm not arguing that. You're arguing that you can't use the RC Pro with the Pilot app...
@@londenard Prove me wrong :)
@Jellan Wait... I'm big enough to admit when I'm mostly wrong. I was able to make it work with beta firmware but in general, apparently it doesn't work. My apologies. I'm going to edit that out because I don't want to spread incorrect info. Reminds me of when we were flying the Air2s with the Motion Controller and FPV Goggles from the DJI FPV Drone... "What do you mean they don't work, I was just using them! " Hahaha! Again, my apologies.
I have all 3 remote at the same time. My most favorite remote is RC. It's lightweight, best ergonomic and stick resistance is just perfect for me. RC Pro stick is too sensitive for me to hold it position.
There’s holes in the back to tighten the springs for the sticks
@@TravelByRail Thank. Is it tighten only up & down or also tighten left & right? I already sold it so can not try myself.
They are all great remotes! I love the lightweight design of the RC as well.
@@timelapsebylkunl72 it tightens the spring so there will be less jerkiness with the sticks and they will return back to their normal position much slower and are stiffer to move
Never tried it but I’d imagine that would happen because they’re spring loaded
So to answer your question
It’ll be up, down, LEFT and RIGHT
All directions
Skydio is from years ago the parameter to knows how others drones are working, not only in tracking. Is better for beginners, also ti fly between obstacles with the RC and the quality of the image is awesome
What about the Smart Controller
The Smart Controller doesn't work with any DJI drone after the Air 2s and it barely worked with that drone.
Curious to know what they're like in hand and the difference between the screen on the top, compared to the built in ones at the bottom...do your hands obscure?
I like the DJI RC but had to send it back with the Mini 3 Pro due to massive jello in the video footage. I either got a lemon or a damaged gimbal. I decided to go with the RC-N1 and a Mini 3 Pro on my next buy which I'm waiting on now. Because I have a Tripltek 7 Pro I decided I liked the brighter and bigger screen than the DJI RC offered. I did like the convenience of the DJI RC though. I do wish the Android OS was open like the DJI RC Pro. The RC Pro is definitely the better RC and the price reflects that. I may save up for one if it continues to be compatible with current and future DJI camera drones.
The DJI RC was so laggy when compared to using my cell phone that I opted to sell it and stay with the N1. The inconvenience oh having to use my phone is much less annoying than lagging between every settings change. I’ve never had an overheating or brightness problem. Also my phone is brighter than the RC built in screen.
Thank for the video! I have a question, what about if someone call while using the rc n1 with a phone? Would that interrupt the flight? In which mode should the phone be before using it with the drone?
Thanks again!
RC Pro all the way!!! I cashed in on the Air 2S RC Pro short term FMC last year. WHAT A DEAL!!!
WoW! Really! That was a good deal. When I heard I didn’t want to look at the cost difference since I already had the A2S. DJI should really drop that RC Pro price. So what was the upcharge with the RC Pro combo?
Love the RC Pro. Game changer
Many thanks for sharing; just one comment, the the RC controllers "stick sensitivity" is appalling!!!; there is no real resistance and makes it vey hard to get smooth video!
Hello, good day. I am considering buying either a DJI RC or a DJI RC Pro. The primary factors for me are image quality and brightness. I’ve noted that the DJI RC Pro is roughly triple the price of the DJI RC, so I’m hoping to get an expert’s view on the tangible differences in image quality and brightness between the two controllers. If the DJI RC Pro only offers a 10 or 15% improvement, I may not find it worthwhile to spend an extra 600 euros. In your experience, is the image quality and brightness of the DJI RC Pro significantly better, or is the DJI RC just as good in any given situation, thus making the Pro version not worth the additional cost? Thank you in advance.
Hi Billy
I want to use the hdmi out for broadcast video with the RC Pro
Can you confirm that once the hdmi is connected that 1080i and
1080p allow 59.94 frame
Rate, that is the current
Standard most broadcasters use.
You're videos are great
Thanks for sharing!
The RCN1 has a major flaw.
If you fly full pitch forward the stick does not lock into place but wanders left or right and the drone ends up rolling left or right. This does not happen with the mavic mini transmitter or DJI RC or any of the many toy quadcopter transmitters I've used in the past.
Haven't found this to be an issue.
@@billykyle You just haven’t noticed. Now that I have made you aware you’ll see what I mean. (make sure the grid lines are on)
The RC n1 gives me the option to use offline maps but without data and GPS connection I can't use the app, I was under the impression that idea off offline maps was for when you had no data WiFi or GPS connection. So in my opinion this function on this remote is a waste of time and without WiFi, data and GPS connection your limited where you can fly.
Hi Billy
Do you have to use Hotspot for RC? Or WiFi?
Great question, but nobody answer 🤔
I love the features that the rcn1 has to charge your phone. Nice it’s in the settings
Yeah that’s nice
Where do I find a list of compatible drones?
Hi, thanks for the review! How does the RC that comes with the Mavic 3 Pro compares to the one that came with my Mavic 2 Pro?
DJI RC cant screen mirror or use AR glasses like Nreal, all the other ones can though
I'm wondering if I get the RC with those signal boosters that attach to it with those yagi's and the dish will that make up for the built-in antennas
Why can’t they have the air 3 available for the RCN1
Nice Billy, I so enjoy your vidoes that lay everything out for us.
Thank you!
Well i have to say Billy this Video helped me make up my mind.
Nicely done production. Thanks Bud
You're welcome Bob!
Hello, good afternoon, I bought my DJI2s drone, I want to exchange its control for a DJI RC with a screen, will it be worth it thanks?
Hello, does the RCN1, that will work with the iPhone, so I guess you can fly the drone with Dronedeply app, so could the Mini 3 Pro work for mapping?
Thank you for sharing.
this should also mention the DJI RC is not compatible with ANY SDK's / 3rd party apps where the RC and pro are
Billy, my Mavic 3t enterprise has the Pro RC (Pilot 2) and my Mavic 3 Classic came with the regular RC (DJI Fly). Can I load DJI Fly onto the Pro RC and use that controller when flying either drone? Will I have to re-bind each flight or will they just work since the software for each is different? Really enjoy your videos!
You mention radio distance but never say what the differences in range is between the models...so what is the range difference between them?
Is there a upgraded controller for DJI MAVIC AIR 1st generation
Can you program the right dial to adjust the shutter speed on the mid grade RC similar to the original Mavic Pro?
You mentioned using your Galaxy fold... Is that less top heavy than using a tablet?
really appreciate you pointing out the range on these!!! that right there is what makes this video stand out!! N1 it is for me! i have the Mavic pro 2 with smart controller and there is no way that I'm spending $1200 on a new controller for my new dji 3 mini pro lol- I do wish they were backwards compatible and i could use use my old smart controller with my mini 3 pro :( thank you so much
The rc pro can handle the fpv goggles?
Why not just get the iPad Mini and use it as your screen. I totally get you on the iPhone over heating in the sunlight. I ended up buying a screen cover to shade it from direct sunlight. I wonder if Apple will ever make an iPhone that will not overheat? Looking forward to the iPhone 15 coming out soon, but not getting my hopes up on the overheating in direct sunlight.
Great video! Curious you mentioned getting a samsung galaxy fold to use for the flight screen...is the controler able to handle that phone when unfolded? I have a fold too and would be amazing to have all that screen real-estate if possible!
You said you for a galaxy fold to use with the N1, does it fit in the controller when opened? I have the fold4 which is much larger, but the outer screen is decently usable, just heavy.
Does the phone pair with the controller to get the video stream?
Great overview of the current DJI controllers. There all very good controllers, and each fits the needs and budgets of different users. I prefer to use the RC Pro, the only down side is the size and weight, it's a very minor con. Thanks for sharing.
Thanks Ron!
The only downside(s) is the size and weight? I believe you forgot something sir.
I would like to fly my air2s with the motion controller and use the headset from my avata. I have a avata but it would be nice if I could fly the air2s the same way.
What I wanna know if there is any difference in stick sensitivity between the remotes. It seems like there is as my friend flies his M3 with the RC Pro and to him he said the sticks on my RC-N1 feels more sensitive. We looked at the gain and expo settings which for both M3s are still stock yet he was having difficulty doing slow cinematic shots on my RC-N1
I wouldn't say there is any difference. You can change this in the settings to your liking with all of the remotes for each drone.
@Billy Kyle I have a friend that flies his M3 with the RC Pro and when he tried to fly my M3 with my RC-N1 he said the sticks seem super sensitive. I have not touched the gain and expo settings and he compared it to his and they are both at default settings.
"Ya man your sticks on that standard controller is super sensitive that I'm having a hard time trying to fly your M3 smoothly. I just flew mine a few days ago and no problems....it's not sensitive like your controller"
Absolutely. The DJI is a very nice sweet spot. Great video Billy.
Agreed Bob!
Billy! Another helpful video. Thanks!
Thx. Does mavic pro 2’s RC pro work with mavic pro 3 drone ?
its a shame you do not touch more on the programmable buttons on the pro controller as for me those are one of the highest selling points. being able to adjust all camera aspects without taking my hands off the sticks is huge. like you can program c1 to something if you push it if you hold it down you can adjust something else with one of the wheels and so forth.
The DJI Rc is able to do this as well, so it's not a special feature for the RC Pro
Yes.
Do you think DJI will offer an Air 2S with RC controller bundle anytime soon?
For the middle of the road controler, could you add some sort of external antenna to increase the range, maybe?
Not sure
I installed the Alientech external antenna mod (Pro refit bracket)and it increased my signal strength a lot. Even using the Alientech "stubby" (quick release) antennas the strength was much better. 4Hawks also makes a external antenna mod kit that I'm told is also good..
I also have a RCN1 and installed a Alientech antenna refit bracket on it. Much better signal strength...
Looking at the button layout, it seems DJI removed a lot of buttons from the mavic 2 controller, and let you buy them back for $1000. It's essentially a mavic 2 controller with a screen
That little RC was awesome to travel with
Official billy klyes giveaway package 🎁🎁🎁🎁🎁
Very useful information and well presented. Many thanks! ❤
Most experienced Mr. Billy K... does the RC-N1 really work with the DJI Mavic 3 PRO? I'm planning to get this Mavic 3 Pro and trade in my Mavic 3 but I would like to keep the RC-N1 (I own the RC Pro, but sometimes I like to fly using my iPad as screen...) and trade in the RC which comes with the Mavic 3 PRO... and is the DJI MAvic 3 PRO officially classified as C2 drone? Thank you for an answer... regards from the Netherlands and take care!
Biggest reason not to get the RCN1 controller: Lack of support from DJI.
Having purchased an OSMO Mobile and NEVER ONCE SEEING IT UPDATE TO BE COMPATIBLE WITH A MODERN PHONE AND UNUSABLE WITH THEIR APP, I'd be afraid of that controller being a brick the moment a phone OS update is pushed, with DJI just throwing up their hands and saying "Not our fault. We've chosen not to provide further update support."
I'm bummed that the RC Pro Enterprise can't work with the Mini 3 Pro, I'd really like to not have 2 different controllers if I decide to get a Mini drone to fly when I don't want to fly my M3T!
Very good information as always Billy 👌
I own both the RC and the RC-n1. One came with my mini 3 pro and one with my Air 2s. I have never used the RC-n1 other than to update the firmware to make the Air 2s work with the RC, so I don't know what a better range even looks like! Ahh ignorance truly is bliss!
Hahah in a vacuum the range is great, but the RCN1 definitely has better range between the two!
Thanks for the video, I have RC N1 for my mini 2, would it be possible for me to connect to Mavic 3 classic?
Can you have more than one controller bind to a drone? I know you can use one controler for multiple drones. You said about switching controllers depending on your flight.
yeah, you just need to repair in between flights
Can I use the RC with screen on my mavic 2 pro
Thanks for this useful video. Question I have is I’m thinking about buying either the M3C or the M air 2s I am
Coming from the mavic mini 😊 which one would you suggest? I am a very infrequent flyer hoping to use the drone more frequently. Thanks for any input.
I’d grab a secondhand A2S, as you can fly it with Litchi, Dronelink, Maven etc. Extra features for free.
Billy you’re the best!
Thank you for that excellent comparison video and thank you for pointing out the shortcomings of the RC in the all important connectivity category. I would love to “upgrade” to the RC from my standard remote but the weaker signal is a deal breaker for me despite the fact that it has the built in screen. Hopefully DJI will remedy this in its next version of the RC and keep it affordable at the same time🙏
If you’re brave, there are antenna mods that will greatly improve the RCs connection. You can fit it in half an hour and it’s reversible.
@@Jellanwhat would that be?
I have the RC and range is not a problem and unlike Billy I see no difference to the RCN1 and no damn phone attached to the RC. No brainer…
Hi Billy Can I use the RC for the Mini 3 Pro for the Macic 3 Pro? Thanks
nice comparison on the remotes.
Are the RC and the RC pro gonna be compatible with the upcoming remote ID rules (since there is no phone attached to broadcast the position of the drone)?
Can the RC still be used with a phone to use other apps like litchi or mapping software?
Unclear at this time
Official billy klyes giveaway package 🎁🎁🎁🎁🎁
I fly the air2s with RC and use a insta360 sphere.
I'm curious to see if DJI release's the Air 3 this year, I assume they would make the upgrade to O4 transmission. I wonder if they will release a new controller with it that will run on O4; or if it will be like the Air 2S running on the original Smart Controller and be even worse lol
it's hard to think about what they will come out with next, everything is so good as it is!
Hya Bikkie,
Wish you made this video using the RC 2 which cme out later.
I found the rc 1 ws only 200 meters short of the RC pro.
Also the RC 2 where I am runs a littler further but there re a few trees at times.
So it is not totally fair but the RC 2 is great at the reduced price.
I wonder if they will somehow make the RC 2 able to use the Mavic 3 & Mini 3 Pro.
As I see the transmitter does not run a simialr version so maybe never,
I sold my mini 1 s it has not furure to me now.
Next the Mini 2 is going as well.
I still love the Mini 1 Pro, Mini 2 Hasselblad, Mini 3 Pro, Mavic 3, And Mini 4 Pro.
Those I will NEVER sell as I hav every extra, vd filters and many batteries for each.
I did get the NV filter for mavic 3 Classic.
The batteries were terrible for the Classic so I got 2 from an ebay seller.
After using 50 % battery on both they registered 1 charge.
So at $ 149 & a second one at $139 I got 2 of his and free shipping. Drone super store is on eBay, now down to $132 for this ABSOLUTELY "DJI" REAL battery. and he is great on many other batteries I own for years as well not fake but REAL DJI!!
The fellow is amazingly honest. Listed as not new but they sure were!!!
I also bought the single charger as I have 2 65 watt charger, IDJI & 1 from RICK Drones Valley.
So I save a bundle as they were getting way too much from the biden jerk screwing with out money etc, etc.
Back to the point I would like to see what you have to say on the RC 2 s all the later updates are on it from DJI for Christmas so that was sweet of them.
I will visit them next time I go to China as a friend works there in Shenzhen.
I have a lot of respect for that older Mavic 2 Pro with Hasselblad.
That drone is incredible just for what it could do way back when.
I know the Mavic 3 has a lot more features but that old Mavic 2 Pro is something!!!
I have used the Lenovo tablet (64 bit Must) with all my older drones.
It is purrrrrrrrrrrrrrrrrrfect with the right I/O cable from Drone Valley
Ray C. in Florida
What about the DJI RC Plus Remote Controller, and what is it compatible with?
Just the M30 right now.
Thank you for the insights.
Brother what is the screen size of dji rc and dji rc pro
is it possible to use my remote from my older Mavic pro with a air 3?
Can DJI GO 4 app be installed in RC or RC Pro?
Very informative video. I have the newest remote with the mini three pro. I love it.
Awesome!
Do any googles connect with the RC PRO ? Great videos !! thank you for sharing with us.
Not …. Yet