New OPL Update Allows for Any Size Hard Drive, Even 16TB And Higher!
Vložit
- čas přidán 1. 06. 2024
- Use ANY Size Hard Drive In Your PS2!
A person by the name of GrimDoomer has just released an update to OPL that allows you to use hard drives of any size! Currently, the largest capacity we could use was 2TB, but now we have no limit (well the theoretical limit is 144,000TB!). So let’s take a look at GrimDoomer’s new version of OPL and what features and improvements it brings with it!
//GrimDoomer’s OPL Links:
► Github: github.com/grimdoomer/Open-PS...
► PSX-Place: www.psx-place.com/threads/tes...
//Parts Links (Affiliate):
► 16TB Hard Drive: amzn.to/40tfgs7
► PS2 SATA Adaptor: amzn.to/3G35ZPu
► Free McBoot Memory Card: amzn.to/3lWG19t
// Support Macho Nacho:
► PATREON: / machonachoproductions
► MERCH: macho-nacho.com/shop/
► WEBSITE: macho-nacho.com/
► JOIN our DISCORD Community: / discord
► The Tools I Use (Affiliate): www.amazon.com/shop/machonacho...
// Follow Me On Social Media
► Twitter: / machonachomedia
► Instagram: / machonachoproductions
► Facebook: / machonachoproductions
---
Timestamps
0:00 Intro
4:00 Stuff Needed To Set Up New OPL
7:06 How To Set It Up
10:56 Features
12:10 Pros and Cons
-----
// SAVE MONEY at these Retro Gaming Stores! (Affiliate Links Below):
► SAVE 10% by using COUPON CODE: TITO on any purchase from RETRO GAME: TITO on any purchase from RETRO GAME REPAIR SHOP here: retrogamerepairshop.com/?ref=...
► SAVE 5% by using COUPON CODE: MACHONACHO on any purchase from RETRO MODDING here: bit.ly/39hHnz7
► SAVE 10% by using COUPON CODE: TITO on any purchase from CASTLEMANIA Games here: castlemaniagames.com/?ref=tito
// TOOLS AND GEAR I Use For Video Game Console Modding (Soldering Equipment, Flux,
►All other stuff I use: www.amazon.com/shop/machonacho...
-----
// These stores provide fantastic GEAR and MODS for RETRO CONSOLES! If you use the following links below, I received a small percentage from sales at no cost to you. This is a great, free way to support the channel (Affiliate)!
○ Stone Age Gamer (Flash Carts and other great Retro Tech)
► stoneagegamer.com?afmc=MACHONACHO
○ eBay (Second Hand Retro Gaming Gear and More. It’s where I buy a lot of the consoles I mod!)
► ebay.us/NCwNkl
○ Sendico (Proxy Service to bid on Japanese Auctions. I use Sendico to get great deals on Retro Consoles directly from Japan!)
► sendico.com/referral/MachoNacho
-----
// Intro Music for Retro Renew Series by Matthew McCheskey:
► matthewmccheskey.bandcamp.com/
-----
Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Macho Nacho Productions or Tito Perez. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.
Affiliate Disclosure: I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
#PlayStation2 #SonyPlayStation #MachoNachoProductions - Hry
For anyone having issues with your hard drive not showing games, when you go to settings make sure hard drive device start mode is set to auto, and then there's an option for block devices next to BDM start mode. Go to block devices and you have to turn on the hard drive in there. Back out and save settings, and that should do the trick.
After several days of watching videos, excessive searching, and reformatting hdd/ssd's that's the one thing that seemed to make it consistently work.
Wow after 2 days of formatting different hard drives i find your advise. WOW ''Go to block devices and you have to turn on the hard drive in there'' was my problem.
Thanks a lot :-)
Dude you are the fuckin man!! Thank you so much!
Thank you that worked
Can't get it to work. HDD isn't in that menu. Just USB, iLink, and MX4SIO, whatever that is
The storage expansion is certainly phenomenal, but honestly I'm going to be getting a lot more use out of this just being able to manually add games without using that god-awful program we've had to use for the past decade lol
The drag and drop nature of adding games is amazing and super convenient!
That is what I'm most excited about as well.
I'm in the same boat. Amazing stuff
This !! So much this !!
@@BrendanRaymondKoroKoro Just like on USB, MX4SIO and Firewire.
Honestly the coolest thing about this is being able to just drag and drop ISOs! The current tool to install games into the old PS2 hard drive format takes foreeeveeerrrr
Agree! It makes the whole process super convenient!
WinHIIP is actually not that slow on a SATA drive, but drag and drop is a very welcome improvement
@@cortbelmont I don't know what you consider "not that slow" but I disagree. I did a lot of file transfers of maybe ~20ish at a time on a usb3 port and it still took like 45-60+ minutes a batch iirc.
Yea, this is big deal...
@@cortbelmont Was not slow at all
This is incredible news! I feel like this is the best build for this system. And I’m so excited to start gathering parts for this! Huge thanks to GrimDoomer and everyone still working for such a beautiful useable outcome. And as always your videos are gorgeous and the soundtrack is so relaxing.
The fact that OPL finally supports exFAT with the internal hard drive setup makes it SO MUCH EASIER to copy ISOs across to the hard drive. I had a lot of issues with getting some of the old tools like hdldump to work reliably on my PC. Great stuff!
Tito can't stop making absolute amazing videos with such great presentation! Keep up the amazing work!
Thanks GrimDoomer for the awesome software and Tito for sharing it with us!
dude you are the man, i been searching all over forums and youtube video to get my 4tb to work and once i watch the video i got it to work thank you so much man
Thanks for the awesome tutorial, just got this working for myself!
UGREEN USB 3.0 to SATA III Hard Drive Adapter worked for me.
I have that exact same Sabrent enclosure, great to know that its forcing this setting on my hard drives, thanks for the awesome video @MachoNachoProductions
Very cool. Thank you for also mentioning HD Boot as I really enjoyed loading straight from the harddrive without a memory card. So, good to know a workaround is being created.
Let's see...
Wow, this is impressive, you could theoretically have a drive with the entire PS2 library on it!
I’m sure with compression and cutting out releases (for example some games that were released both separately and on the same disc, or games that got definitive releases later on) you could fit the full library on a 16 tb drive.
@@einsteinx2 Do you have that same statistic for NTSC-U releases?
@@Gold171 Those are probably all of the Regions combined.
@@Gold171 So I just checked and looks like that stat is out of date now anyway, there are currently 11110 total games, which if the average dump size stat is the same would be about 25.5 TB. There are currently 2470 America region games which would total about 5.5 TB.
However keep in mind that includes MANY demos, betas, duplicates (sometimes 3 or 4 for a single game), etc. So the total size of just retail games without duplicates would be much smaller.
I’d have to grab the DAT and dig into it to get the exact figures though. I’m just going off a quick look at their website.
In CHD form, just US releases minus crap like Barbie, I fit all games on to a 2TB drive. CHD frees a lot of space so might need 3-4TB for ISO.
Thanks for this. Saved me a ton of time dealing with the old software and having to buy a compatible drive. Just formatted an old 4 tb I had lying around and good to go.
Very informative video, easy to follow and great editing skills! New subscriber! 🙌✨️
This is so awesome thanks for the video! This also makes me happy that it supports sd card at the same time as the hard drive because I got the sd card based off of your video. Im also so happy that it supports drag and drop and you also dont have to split the large games in half anymore. Man this is an amazing update, good job everyone involved!
Thanks for the video. This is unbelievable what has become possible with OPL. I tried it yesterday after this video with my PS2 and can confirm that with version 1.2.0 the video sequences in Fantasy XII are played almost smoothly and that from USB! This is a huge improvement compared to version 1.1.0. I am thinking about installing a hard drive in my PS2. Then all my games should be able to be played perfectly.
VERY helpful vid. If anybody is like me and couldn't get OPL to read games from my hard drive, I found this nugget from grimdoomer in his testers thread:
(in OPL settings) You need to set BDM Start Mode to Auto, and under the Block Devices menu you need HDD set to ON.
Block devices appears to the right once you select "auto" for BDM Start Mode.
I have these settings and my games still do not load consistently in OPL.
Dude, I had the same problem until I read your comment! Thanks a lot, bro!
Rock on! I'll be waiting for that official update to do this. Thanks Grimdoomer and Tito! :)
Looks like it's about time I updated my old opl setup on my ps2. Amazing that people are still working on this stuff in 2023.
This is one of the very best channels in this hobby. Thank you for your consistently amazing vids.
Awesome, I’m gonna give this a try over the next couple days. I probably won’t really use it but I love attempting these mods and being successful, just another project that gives a good feeling of satisfaction and accomplishment
⬆️⬆️⬆️congratulations you are among our shortlisted winners claim your reward🎁……..
I’ve been thinking about modding my ps2 for a while and was finally thinking of getting around to it so it’s funny you upload this now. Maybe it’s a sign if one of my favorite CZcamsrs is posting it 😅
⬆️⬆️⬆️congratulations you are among our shortlisted winners claim your reward🎁……
Another awesome video, it's pretty insane that you can fit the entire library on one drive now.
That being said I think we're going to start seeing the first petabyte drives in probably 15 years from now, maybe less.
The drag and drop option is a game changer! Interested to research game compatibility differences on GrimDoomer's OPL versus Original OPL. Is there a working list at the moment?
Thanks for the great video. I ordered the MC2SIO from your previous video and hope to be styling with my PS2 Slim
I love those passionate folks out there. Great video!
Gracias Tito por tu video. Hasta ahora había sido un fastidio este tema y gracias a ti me he animado a probarlo de nuevo y todo el proceso mejora muchísimo (no tener qué usar aplicaciones para trocear las ISOs etc)
for connecting my Hard Drive to my PC without opening it and connecting it to the motherboard, I bought a cheap USB to SATA adapter from Amazon. Your milage may vary depending on the vendor you get it from, but the one I bought it branded as BENFEI and it works perfectly for moving all my games to the hard drive
I followed all the instructions, but I had to start OPL three times until the Games on the HDD would show up. Works great now!
Thank you for your video, it's always a pleasure
Great video as always Tito! I would love a video of 8bit era consoles too.
During your setup instructions... You can do the initialize and the format BOTH in the Disk Management Utility without having to open one program closing it then opening a second program. ALSO you can just right click the start button and then click Disk Management, instead of using search. Greatly simplifying your instructions.
I can't tell you how many times I've had people ask me what right click was. Oof.
This is insane work, kudos to all involved! Just waiting on a good HDMI mod to come out :)
Honestly, the RT5x is much better value for money. I guarantee you won't see the difference between a pure digital out and the RT5x in practical use, unless you like to game inches from the screen.
Won’t have to wait much longer. The crew at pixelfx has great stuff in the works :)
This is amazing, I've been using Whinhip for years.
I don't think I'll be touching my PS2 I use now to do this but I'll definitely consider doing this with my Second PS2 Phat I have.
I love the music in your intro so muich. It sounds so, so good. :3
OPL is amazing, I'm glad to see new features like this enhancing it further. Personally I just use OPL to load my games off my network storage since it's been super convenient for me to use.
the smb share is another great method to load games!
I use SMB share for my slim PS2 as the laser is dead. I was going to use that on both my slim and phat but I'm going to go head first back into using internal HDD for my Phat PS2 once this version of OPL goes out of Beta.
@@MachoNachoProductions I am glad that my idea is of use. 😅
(I was also the first User of SMB and OPL/USBLD. Good old days...)
@@asimpson1 It's not even in the Betas, but a seperate test-branch for now.
@@tnaplastic2182 RIP PSX-SCENE...
Wonderful!
Each time you make a PS2 hardrive video the process improves so much.
Back when you posted your first PS2 HD video I was so confused.
It seemed like everyone had a different opinion of what software and setup was better.
Looks like all my issues with it have ben solved completely.
I can wait for the final version though.
Ran this set up and have all the working titles on here now plus I have all working ps1 games to boot win win. Thanks
The biggest improvement IMO is not more storage, but being able to drag and drop ISO files. With an SD card setup it's even more simple even if storage size is limited since it's so easy to change games in the card. I'm guessing we can just copy over our +OPL folders in our currently PS2-formatted drives for a smooth transition to this new OPL release?
Big thank you that you keep us updated about new things of the retro gaming hacking scene :)!
"What could possibly go wrong?"... Famous last words, lol. Anyway, what a weird error. I always thought that 4K drives were typically configured in manufacturing... Anyway, mad props to GrimDoomer for the innovation!
You can use diskgenius to format the hdd with 512 sector size instead of 4K. Tested with baseus/ugreen usb 3.1 enclosure.
Tito, I love your videos man. Keep up the amazing work!
I'm gonna try this new version and the drag and drop feature is a game changer.
I'm hoping someday you will try the PSIO mod for the PSOne.
⬆️⬆️⬆️congratulations you are among our shortlisted winners claim your reward🎁……
Tito.... Like always, your videos are awesome!
incredible update to OPL! looks like i will need to pick up a 4TB+ hdd and move all my files over once again (sadly, i setup 2X 2TB hdd's less than a year ago thinking i was finally done with my archiving haha). i didn't think it would get any better than 2TB to be honest. my only concern at this point is compatability as i hope the larger capacity does not introduce game compatibility issues or bugs. i think i will wait this one out for a bit to ensure everything is working 100%.
Keep those 2 TB ones for archival purposes! Having them already set up is a great fallback option ... HDD and SSD are not at all immortal as we know ...
It’s amazing how much love the PS2 still gets!
it was an awesome console!!
It’s often in the debate for best console of all time, and rightfully so.
i still have ps2 fat and slim ps2 the best
I have this exact Sabrent enclosure. I'm glad you called it out, because I would have been going insane trying to figure out what was happening! i guess opening up the case and direct connecting SATA is my only solution for the moment because the Sabrent is the only external option I have.
⬆️⬆️⬆️congratulations you are among our shortlisted winners claim your reward🎁…….
Knowing I no longer have to jump through hoops to get my hardly stable 2TB drive to work has me literally in tears
The future of ps2 homebrew is exciting!
@@MachoNachoProductions There is much more stuff in the works.
@@tnaplastic2182 Dkwdrv ❤
@@MitraDaGalp the day that this replaces the default PS1 driver on boot I'll be ecstatic. Would also be amazing if booting PS1 isos from the HDD is possible, but unfortunately the creator said it will only work on Deckard (75000+) PS2s, which lack HDD support. If this changes to work on pre-deckard consoles, we will have definitely hit the jackpot.
@@Brodensson yes but fortunately PS1 games run perfectly well from USB despite it's 1.1 speed. The best thing for Deckard models is probably using the mini router, don't you think?
That's very great news for every newcomer and games horder in the PS2 modding community! 🥳
However no FHDB support is a deal breaker for me until they work around that. I have my Slim set up with FMCB + USB but I love the simplicity of the Fat (once the HDD is prepared) being setup with FHDB only, which makes her look very clean and stealthy mod-wise, while my Slim looks very much modded from the outside.
My personal collection/selection of PS2 games only is a little over 700GB and that's with some duplicate PAL/NTSC games and special editions like MGS2S+3S, so the extra capacity is no net worth for me, which only brings it down to FHDB vs Drag&Drop for me ... and I already have my HDD prepared the old method, so there is nothing gained by switching only lost ATM. When FHDB support is added to the new driver, then I will happily upgrade just for the sake of modernizing my setup, but until then, there is no reason for me to do so 🤷♂️
Now I am only waiting for a proper PS1 solution ... hope is small but I refuse to give it up just yet.
The problem is not a driver, but that FHDB can not *boot* from an MBR or GPT/GUID formatted drive!
What is FHDB?
This is good. I was recently looking at my PS2 and dreading adding more games to the hard drive.
Great video :) Nice update too :)
Does the allocation unit size matter for OPL?
Btw, you can check your sector size by going to System Information and looking under Components>Disks
Unreal. Every week I'm just blown away by how far these devs are pushing our old beloved consoles!
⬆️⬆️⬆️congratulations you are among our shortlisted winners claim your reward🎁…….
wish they sold them to the market, sadly we are just modern slaves unable to do anything against the system
This is great news. PS2 is one of my favorite systems of all time and it'll be nice not to have to pick and choose what games to put on a hard drive.
Fantastic update! I was just messing around with moving games to my PS2 recently and was wishing for a better way. My prayers have been answered! I'm updating immediately....provided it still supports running PS1 backups
PS1 does NOT work...
This is really Wild! Great video!
I did setup my PS2 with FreeMcBoot a while back....did the old burnt CD swap trick LOL. ^_^
So this is good to know. I'll have to revisit this.
Once again, great video.
Cheers!
-Gerry
This is amazing, not having to use external apps to transfer games is the best news for PS2 modding! It used to take days to fill a 2tb drive. This is amazing.
Well done GrimDoomer!
I've had a lot of similar issues with SATA -> USB enclosures like that. I've found using an enclosure with an eSATA connection avoids such issues.
Could you add a link to the one you are currently using?
Oh man, this is great! Can now fit the entire PS2 collection on one drive. I just finished an OPL setup and getting the artwork to work. It was a real hassle! It looks like I get to do it again now. :/
I had this same exact issue with a similar looking enclosure from another brand I had been using with my NAS. At the time I thought it was some kind of security encryption forcing me to only use that enclosure with the drive, but now knowing this it could have been the sector size issue.
The reason I discovered this was that the cheap enclosure was making the drive click regularly even if it wasn’t being accessed. Since it was a backup, I was concerned it was killing the drive, I put it into a different enclosure and found that I could not read the drive at all with it! In my case I ended up having to reformat the drive to use it in the other enclosure.
With all these new developments for the PS2 I hope that someone creates an open source alternative to the HDD enclosure as original ones are getting harder to find and like mentioned in the video the third party ones can be of dubious quality.
Regarding the sector size problem, I guess having a removable sata frame in the pc bays is always good. I use it for making backups.
That should work 👍
@@MachoNachoProductions if I use a 2.5 HDD I can just connect it to the PC with a SATA to USB 3.0 cable, right?
The sector size problem with the JMicron chipset USB enclosures (most use this chip) has been fixed. You just need to install the latest firmware for it (available from the manufacturers website). I have the same enclosure as Tito and it formatted my 6tb drive just fine with 512 sectors.
@@davidcameron648 Hi, is it the "Jmicron FW Update" on the sabrent website?
Man, amazing! Mostly for the drag and drop option. I truly hate using "transfer software". I hope it gets an official stable version soon. Very thankful for the dev. Great work. 😎
Well... It isn't even in the official OPL Beta-builds yet. It's a seperate branch test-build.
Thanks for the update news :)
I hope this adding a layer doesn't introduce any of the bugs that some games had when running from usb. The amount of green on the internal hdd column on the opl compatibility list always kept a 50001n as my everyday driver.
Great video, super appreciate the info/tutorial on such an awesome update to OPL.
I still had issues with games appearing in the OPL Games List and in the OPL Settings and in the BDM / Block Devices section turned HDD to Off - which seems counterintuitive but the games appeared! For CD games mine were all in Bin/Cue format and only OPL Manager worked to convert them into ISOs that showed up in the OPL list. I hope this helps someone out there!
I'm now trying to figure out how game saves work as my FreeMcBoot Memcard in Slot 1 is almost full and most games don't seem to allow you to choose the Memcard in Slot 2. I've been physically switched after booting a game but its not ideal - any suggestions welcome!
Interesting, Mine also shows 512 sector byte size, and when I load up the OPL from the USB the IDE section is blank, and I also have the BDM set to auto. Going to go change it to off to see that that fixes it
BRO!!!! Thank you! This just got my games to show. Glad I combed through the comments, was about to give up on this drive.
@@DoubleDguitarglad it helped you out! Was honestly close to giving up
Tried it but still not working for me. It sees the HDD but it is blank. exFAT, 512b. It is a 3TB but I decrease it to 1.5TB (I just need 1.3tb) hoping for more compatibility but still nothing.
Somebody give this man his flowers for this video 💐! Been running mine off the Fold 4 but this 👌🏾
Incredible, I was waiting for this for years. I currently have 2 PS2 with 2TB in each to store my European fullset. Now it will become just a console with 4TB
Hi,
I manage to (re)buy a fat PS2 in order to play old games! How does it work? How Can I download this version of OPL ? With this, Will I be able to put a 6 or more TB HDD in the PS2? Thank you!
I always play straight through an SMB share over ethernet but this is a really awesome development. It might make me consider putting an HDD on my Fat PS 2 and maybe taking it with some games for a gaming night at the office.
You might as well consider testing out another upcoming feature. "UDPBD" will replace SMB for everyone who can run the server and it can probably be compiled into an OpenWRT-package.
It's only March and we already have Time's Person of the Year. 👏
Great, thank you very much for this novelty.
Splendide !
Thanks for sharing.
Are you planning on making a video showing how to use an SD card larger than 128GB on the PS2 Slim?
I go to the OPL link. The zip files when extracted do not have an OPL.ELF file
I finally got this mod going on my PS2 last night. I'm only using a 500gb hard drive, however because I don't need to convert, things actually work by dragging and dropping! Very nice, thank you!
How does this affect playing games and dvds on the disc drive? @jacobprayer8656
I don't own a PS2 anymore (I simply emulate it these days), but it's awesome to see the scene take such a monumental leap!
Currently have a 2tb ssd in my ps2 but considering a regular 4tb HDD. At the end of the day the ease of transfer is a huge benefit. Using 3rd party software led to me having to reformat my drive if I wanted to write more. Not to mention having to split my art drive on opl due to how many files ulaunchelf can see.
This leads me to a couple of questions. OPL creates the folder on the exfat drive correct? Also has someone made a SATA adapter that supports Ethernet connection? Removing and inserting the HDD can be a chore.
You dont have to use larger capacity to use this new version, you can still use your 2tb ssd with and have all the benefits, actually you will benefit the most by using cause windows will be able to use full ssd speed while also making it easy to transfer files, just format it to exfat and it will work , so it will have its benefits to stick to the 2tb ssd.
@@erwinamanciosilva7693 yeah but what if I want to put more games on it? Also if I have to delete games and add new ones it gives me writing errors which results in me having to reformat the drive.
I have a recommendation:
5,25" Hot Swap Frame for 3,5" HDDs, internal and SATA of course.
They are cheap and you can easily transfer stuff to and from the Drive.
That's the way I transfer stuff from PC to PS2 drives (640GB and 1TB)
Do you have alink to one on Amazon?
Great video for PS2 enthusiasts!
I very recently finished setting up a 2TB SSD for my PS2 (666 games with space for a few more). Transferring the games wasn't too bad using HDL Batch Installer. The more laborious part was using OPL Manager to grab all the artwork, having to rename many titles from Redump into a compatible format, and even then artwork for some titles didn't display in OPL. It's nice to see the process of adding games just got easier. Hopefully grabbing artwork can be made easier too (unless I was just doing it wrong).
OPLM supports fetching the name and renaming your games.
You can load partitions like the +OPL-Partition with PFS-BatchKit-Manager and then just drag&drop files as well. You can use OPLM to automatically fetch the Art for your games and let it place it in the right folder with the right name as well.
@@tnaplastic2182 Thanks for the pointers. I need to do more research. I don't mind reading, but even on the relevant forums, information seems somewhat scattered.
Drag and drop from PC to PS2 HDD is awesome. It took me days to load my 2TB using the old way and many failed on first attempt. CHD support would be great as it saves so much space.
Where do you put PS1 games?
As for that dock, when you formatted, if you changed the default cluster size to 512, would that not have worked? I think 4096 (4kb) is the default size regardless. I have that dock. I've had mine for years and has a built-in cooling fan but really it is identical. I'll have to check out the formatting.
OPL supports ZSO.
PS1-games? Nowhere... It is not supported...
you're confusing Allocation Unit or Cluster size with Sector size.
@@TieDyeShyGuy You're right. My bad. I fixed it.
@@tnaplastic2182 That is what makes the old way better, PS1 support. If I'm not mistaken, you're still stuck to low resolutions that almost rules out all flat panels except old standard definition LCD TVs and monitors. You would need an upscaler like a retrotink (or just use an emulator). The copy speed is actually not so bad now with USB3 but you will need to run it overnight, the old method that is.
This is odd, I have the same exact Sabrent enclosure that you have (Bought 3~4 years ago) and I used it to set up OPL just fine. Mayhaps they changed the way it works?
Since he did just buy it, and you’ve had yours for a while that does sound like a very good possibility that it did get changed.
Were you using the old tool to install PS2 games and not this new method? If you were it wouldn’t show up at a normal volume on your computer so the enclosure probably doesn’t mess with the sector size. Just a guess…
Could very well be
I’m sure with some more troubleshooting the answer could be revealed.
At work, I use a Startech slot loading, external drive dock. It's mostly used on drives in embedded systems, and doesn't silently change settings.
Supporting XFAT is such an amazing feature! Really glad to see how sophisticated and easy to use PS2 homebrew has become in the last few years, even though it's not a console I follow too closely.
FYI to anyone looking to use this. This OPL version has been abandoned.
Why?
I wish this could be done to the PS3 one day
Multiman/Webman has the ability to mount PS3 ISOs over a network share using a special program called ps3netsrv that works on Linux. So you could probably build yourself a dedicated NAS for this. It won't be portable unless you configured the network on both the PS3 and NAS to have a similar function to a massive external HDD, but it should still work.
Yeah it’s crazy the PS3 has an even lower limit (1.5TB) than the previous PS2 limit. PS3 games are much bigger it would be nice to have a bigger drive in there, though you’d still be limited by the 2.5in form factor… would be nice to at least be able to use a 4TB drive though…
Would have been cool if they had a larger bay for 3.5 inch drives
@@tyisafk yeah I use my laptop as a nas to access media files and play them back on PS3. But running PS2 games HAS to be done on the PS3 internal hardrive at least as of right now.
@@MachoNachoProductions There are very slim profile flash drives by SanDisk that bump up the storage by like 256gb. But that's still not enough for everything good on PS3.
This is pretty cool, I currently have an older version of OPL (Anniversary Edition) but it still runs well. My opinion I don't really need more than 2TB as I don't have that many games to fill that. Plus my PS2 console has the DMS4 Pro modchip installed so I don't need FCMB either. I previously had to load my PS2 games via the HDL Batch program, so to just simply drag and drop the ISOs is a big time saver. Now just have to see if I can incorporate the new version of OPL to the modchip's flash somehow.
I accidentally lost a hard drive processing the old way of using OPL a few month ago (feet, wire, disc, floor while writing... 😭)
This update will be such a life saver for later 🙏🏽
How about OPL Manager to download covers etc? Can it read exFAT HDD too?
Yes it does. Works with my Exfat formatted USB for my SMB share.
Ok if you want some helpful advice and don’t want to have this thing running off of a USB stick the entire time drop it into the boot folder run it and save it and it should show up on your main list of games in fmbc I spent a day looking for this so I hope this helps someone
So I did this, ran it and clicked save but it still doesn't show up in the fmcb menu. Ic opted it to the boot folder like you said. Anyone what might be wrong?
@@soulreaperx7x did you try and run the opl in the menu or did it take you too the original one? Because for me it somehow replaced the one in the main folder and just worked but I can try and help
@@Velikann I managed to figure out eventually. Whatever I did it would always take me to the original OPL which in my case was OPL-v1.0.0. I tried filling replacing, renaming, copying in different areas etc. Nothing worked. I eventually looked up how to update OPL on fmcb card and I had to name the new OPL elf to OPL-v1.0.0 and now it finally replaced the old with the new. It still says the old file name but it is indeed the new OPL. If I try to name it to the new version number then it completely disappears from the fmcb menu list programs available. Name doesn't bother me but it is weird that that's the only way it worked.
Anyways thanks for the response and offering to help though. Much appreciated.
@@soulreaperx7x glad you figured it out these things are strange lol
Awesome to see this, the PS2 definitely needs this the most. I would love to have every single PS1 and PS2 game on my PS2, i wonder if 4tb is enough. The PSP needs something similar aswell, it can support upto 4tb but there is no SD Card adaptor that goes beyond 128gb and then there is the PSX DVR, that definitely needs it’s harddrive encryption reverse engineered.
No... ~56TB might be enough...
...and the PSX HDD stuff has long been RE'd by my fellow Admin krHACKen.
Damn, that’s a lot of storage! 😅
in your tutorial when you format the exfat partition, i clearly see you leaving the "allocation unit size" to default, thats where you are supposed to manually put 512B if you dont want it to be 4kB.
could that be your issue and not because of the enclosure?
No, that is NOT the issue because *filesystem clusters* have nothing to do with *logical sector based addressing* on a Hardware-level.
We can read pretty much any Cluster-size from 512Byte - 128KB without any issues. IDK about those above that... They are not thoroughly tested.
It is btw. NOT recommended for ANY device to select a Cluster-size below 4K...
Very cool!
When having lots of games on the harddisk, does it take a long time to bootup the system, show all the games when browsing or any other kind of slowdown? Think I've seen a review once on this and they mentioned having lots of games came with slowdown, perhaps the exfat update also takes care of that?
Thank you everyone who's worked hard to extend the life of such a iconic console.
Hmm, scratch that. Looks like Grim Doomer has abandoned the project or something? Even the download links to the ELF file are dead.
They are a bit hard to find, but I found them you just have to do a bit of snooping into the version logs, and there will be a few downloads. I would recommend looking at the updates though because they change.
@@Velikann yeah but I mean his fork is basically dead while the main fork continues on. It's just weird that he straight up disappeared.
Cool stuff. Nice to know bigger drives can be used. My old ancient IDE Maxtor drive is probably seeing its last days of running lol. Still works but can't wait till it finally fails as I would lose the games I like to play. This video will help me out setting up a new drive another day.
And i thought my 250gb SSD in my ps2 was enough. lol
Is it not? You can stack ~100 games on it and as ZSO even more...
@@tnaplastic2182 i feel like personally it is, atleast for me. Ive used about 100gb of that and im almost done using it. 2tb felt like overkill but 16tb is insanely overkill
I modded my PS2 Fat with a flip top lid and a hard drive in like...2004? I really need to refresh it. Nice to see you don't need a flip top lid anymore. Wish I would have kept the original shell. This looks really fun to set up and get going.
dude thank you for this excellent news
To me the biggest game changer is the fact that we can use now direct fat32 drives instead of passing by the hddmanager of the ps2!
exFAT*