THIS VIDEO IS SIMPLE TUTORIAL ON KOMATSU 220/228 /6/7/8 PC & LS VALVE, WHY IT IS OVERLOAD OR ALMOST STOP THE ENGINE WHILE ON WORKING, THIS IS THE SOLUTION ON HOW TO FIX
Good job sir thank you for giving us your knowledge Pwedi din po bang pakipaliwanag yong PC 200-3 OLSS type pump kong pano amg adjiusmemt sa engine backdown pag nag ooperate ma po yong machine.. Thanks po sa info
ask ko lng anu b ang main problem nang machine, engine o main hydraulic pump, lumang npaka lumang model n ito ah, pero ok lang, minsan kasi akala ntin nsa makina ang problema lalo n kpag naooperate, pero d natin n notice n nsa hydraulic system pla, pero meron din talaga n ang mkina n ang problema, hindi b mausok n nag makina mo o may backpressure n s breather, ask ko lang pra may reference ako s mga ppwede ko masabi, ngayon kung bagung ovehaul ang makina, ok malalaman mo nman yan, kung malakas ang pickup nang makina mo kpag nka idle k biglain mo nang full acceleretion, dapat kung ok makina mo bigla din sya n nka full accelerate pero kong nka full n tapos dahan dahan ang pagaccelerate nya may problema o low power talaga makina o mahina humatak.ppwede n magadvance timing or late timing or inspection mo muna ang makina mo, baka may mga dapat n nkakabit pero nakondem n o d n ikinabit. ha. o kya add mo ako s messenger jhunhunk pra makapag send k nang picture o kahit kaunting video pra makita ko ang sitwasyon
Chief,can you relay to us,how much the standard resistance for the two solenoid...if the reading is abnormal or no reading at all in ohms it causes the solenoid valve closed the passage of hydraulic fluid,am i right?God bless your channel it helps a lot to practitioners like me.
ser salamat poh marami poh akong natutuhan s inyo isa nlng poh problema k poh ser..ok nmn poh lahat ng power nya pero pag ka poh louded sya nauupos poh ang galit ng makina.pero s boom up lng poh sya hirap.tapos pag nagwarning poh battery lumalata din poh sya.ser..pc290 poh komatsu poh ser salamat ser..
@@abetvits94 ang problema b eh ung nmamatay ang makina kpag nka full trigger k s boomup o arm in or out kpag ganun check mo muna ung dlawang solenoid doon s main pump, ang pag testing nya switch on mo tapos on mo ung safety lock ska mo e check ung supply dpat pareho un n may supply 24v kpag na start mo n mawawala ang supply nang isa ung isa lang ang permanent check mo un, kung may bulb tester k mas maganda ksi makikita mo n iilaw ang bulb ppwede rin n nagkapalit ang socket nya , plike and share n rin ang video ha salamat
Thanks for the video. I have old 228 Komatsu excavator.. it won't shut off the engine even I turn off ignition and pull the key out. Engine is still running.. any idea?
Hi there my kohmatsu pc88 will not run the engine stall and low power.. but when I run emergency switch it runs perfectly.. any ideas?no problem with epc silonide it's new..
Sr I have a problem with my Komatsu.. I changed my hydraulic oil on my Komatsu.. After charging I the hydraulic was low and I topped up and it became too much. Then the plug at the front of the solenoid vavle come off due to pressure.. Since then the machine is busting the pilot hose and the hose which goes to the block behind the main control vavle.. It is lacking power if it gets power it bust the seal or bust a hose what might be the problem
bro i dont konw how thats happen you just change the oil in then, all the problem you told is came out saddenly,how thats happen,what type of grade of oil you used,before you do changing oil you never had any problem,contac me in my whatapp. +971567581176
@@user-df9yn4hh2q for what? just enough electricity, i dont understand what are you talking about, bro you should have to discribe something what do you need.
Hey bro i have a komatsu pc2288uslc-3 and it reads overheat temperature as soon as the machine is started on a morning i have changed the coolant temperature sensor and it still reads high
ok bro thanks for contacting me,so regarding about the problem of your machine,i thinks it is electrical shorte on wiring harnes insfect the harnes maybe the harnes is touching to the body,but have you try,disconnect the temp sensor and try to switch on,if still the same,can you pls contac me in my whatsapp i need some pics about the monitor,+971567581176
actualy bro many reason why the is happens first maybe low pressure one of your pump that driving and giving pressure for the boom, at first you should have to check individualy your main pump, and also try to check your travel if one of the travel is slow meaning one of your pump low pressure, see this video bro, how to testing the main pump to know if main pump is low pressure, you have to use pressure gauge around 500bar gauge the attach the gauge where the main pipe pressure locate there is a small head of bolt you have to remove then attach gauge there, ok, czcams.com/video/mFUyGo0BxjY/video.html
hi sir,first thanks for messaging me,and giving the information about the problem that you are facing on your machine ,sir i just want to ask first before the problem is started,what did you observe,we want to know more ,for me to analys what is main cause of problem,contac me in my whatsapp for more better conversation,+971567581176
Hello sir some function of hydraulic system its working or not ,if not meaning maybe do you have problem on ppc lock, but if some function is working I think you should have to check hydraulic pressure and need to get high pressure at arround 350br
Sir magtanong lang po,pc200-6, sa main pump 2 solenoid, saan mag gagaling hydrauluc oil supply, ung nagawan ko sa main control nangaling, ung suply ng pump1 na pumunta main control valve, doon kumuha ng supply for pilot lever, pa ma ba yon, tnx
what do you mean 20ton,can pls give me the complete details of your machine exact model number,then have try before that 20ton before or just first time.my whatsapp +971567581176,send picture regarding about the breaker and deatails of your machine
hello sir . i have same problem excator is doosan 300. i check the solenoid valve electric is available .but now have same problem means operating machine then almost stop machine. have any another problem sir?
@Johnson hi bro i have doosan dx225lc 2008yr i have same problem loosing power onload and now pump getting too much heat did you sort your problem? Thanks
Hy mr.! I have one Komatsu PC 210 LC 8 from 2008Fuel consumption is very high at about 18l / h. Do you have any idea why? The engine works well, it has power and does not emit smoke, it rarely happens that travel sistem it reduces my engine speed!
Good day Sir.. New subscriber here..ask ko lng po kong anu cause ng hydraulic overheating sa KOMATSU GD 755-5R na grader?. thanks po and more power sir..
s greader mga pweding dahilan ventilation, or over used n ang hydraulic oil mo, kung dipa npapalitang ang hydraulic filter mo, bka nagbabara n o hirap n makadaloy langis, pwede ring over pressure, at over yong flow limit nya.
@@aljonnfernandez8889 ganun b kabilis uminit baka nman sira lang sensor check mo muna sender nya bka damage nya npaka impossible nyan in just a minute eh high temp n agad
@@caterpillarjhunhunk oo nga sir..napalitan ko na sir.. Hindi mo mahawakan mga hose sa sobrang init..pinalitan ko narin hydraulic pump at control..nag bago lng kunti..
@@aljonnfernandez8889 na e check mo nb ang pressure ng main pump mo ngayon baka over pressure sya o over din ang flow, tapos kpag ginagamit n kinokontrol ng operator pra lang d mamatay, ppwede talaga magoverheat kpag ganun, mag chexk k muna ng pressure pra sigurado pra may basihan k ha
Hello I am from India have Komatsu PC 71my engine doesn't start, but if I losen MRV ON MAIN HYDRAULIC PUMP, ENGINE STARTS IMMEDIATELY, THAN WE TIGHT MRV FOR WORKING, IS THERE ANY SOLUTION
ok bro this is i want you to do, can you check the main pump if there is any solenoid attach on the main pump check it and see if we have power supply if solenoid available there.
contac me in my whatsapp +971567581176 and send me any picture of the model and serial number, and also pump and engine ok i try to find the model of your machine but i cannot find it
sinsya n now ko lang nreplyan message mo,check mo muna fuel line baka nagbabara pwede s tanke pwde rin s mga hose,s mga ganyan problema pweding kinakapos sa fuel yan,check mo n rin electrical bka may nagllost contak
ask ko lang anung brand nang machine mo,kung same din nitong nsa video check mo ung solenoid,yan nsa side nang pump dlawa yan s unang start mo nang machine mo dapt ung solenoid pareho may supplytpos kpag nagoperate kna magauto off n ung isa at isa nlang ang gagana o may power,or kung may mssenger k add mo ako **jhunhunk**pra makapagusap tyo nang maayos bka d kpa nka subscribe bka pwede subscribe k muna and hits mo yung bell and select all
Boss pa2long pc 138 dati hirap umandar pero nung napanuod ko video sinubukan kong. Nag direk sa bat.gumanda ang andar pero mahina naman ang galaw bagong over houl un makina main pump at control
Hey bro, I have a 1998 Komatsu pc-75 machine that’s 16,000 that bogs down when tracking it. It only happens when it warms up, could this be a fuel issue? I cleaned all the lines out and someone put a small electric fuel pump on it. Could the fuel pump not be putting o it enough fuel?
ok bro actualy its hard for me to say somthing regarding about your problem, usualy that type of engine you have on your machine is everythings manual ok,now asper my imagination that i dont know exactly what happen, but for better conversation can you please contac me in my whatsapp, +971567581176, give some picture about how the engine figure and fuel pump if you can, its for me and my refference to analys the problem.
alin ang mahina kanan o kaliwa, ang left travel nyan front main pump ang nagpapagana, ung right travel nman ay rear pump ang nagpapagana individual, ang ksama s front pump, ay boom, bucket at travel, the rest pra sa rear pump n swing, arm at travel
brad sinsya n at ngayon lang nagreply, yung PC-epc ang permanent n may supply yan ung nsa bandang labas n nsa pagitan ng dalawang pump.ung isa LS-epc yan ung nsa bandang loob yan nman mag oon lang yan s starting time kpag nagenergize n o na on n ang ppc lock valve o ung lock s operator cab un nsa kaliwa n handle magooff n ung habang nag ooperate ang machine then kapag naka idle lang ulit makina or nagpapahinga magoon ssya to release pressure at mag free wheel lang makina habang nka neutral k.
what type of hydraulic system bro, play this video bro and pls bro do not skip the ads ha pls. check that video regarding some simple way of testing czcams.com/video/mFUyGo0BxjY/video.html
hi, regarding about the solenoid we have so many type of solenoid and power input 12v 24v on dc about highier voltage is also same, thats defind on the size and where is using
bro i dont know what type of solenoid that you are look resistanse, many type of solenoid that we have and all of that diffirent resistanse just because of power input now if you are asking about komatsu in ppc lock solenoid that is ranging 20 to 60 omhs for 24v input
kung alam mo ung valve na nakalagay s likod ng main control valve ang tawag doon ay merge divider doon meron din nka install n relief valve sa ganyang problema isa un s dahilan kung nwawalan ng power,pero kung nwawala wala o putol putol ang pag gana nya check nyo rin ung pilot supply baka naman ung solenoid nya nagooverheat n or pasera na,merge divider,at double stage solenoid baka hindi n nagffunction ng maayus inspection nyo muna ung electrical baka isa sa dahilan eh naandoon
pwede nman kya lang pang testing lang para s pag trouble shooting,kung mag ddirect ka observe mo ung solenoid bka mag over heat ksi hindi n nrregulate ung supply nya,n galing ecm
sir good day from Philippines. need help with our pc200-7.... low power, changed main pump, still the same.. san po ba kayo pwede macontact? thanks in advance sir!
Sir paano malaman kung normal working ang solenoid valve,,at ilan ba talaga ang voltage,, kc nung nag check ako 8volts na register sa tester, ang isa walang voltage,, nka start ang engine at nka engage. Pero slow idling pa
ppwede ko b malaman kung anung model nang machine mo, normaly kung nag machine ay dash 7 below supply nyan ay 24v pero kung dash 8 pataas may solenoid n ang nagccontrol ay ecm ung tinatawag n variable solenoid, yan eh kung komatsu.
ito p s first starting mo normaly ang solenoid nyan ay nka on lahat s dash 7 yan ha. tpos kpag nag operate kna magooff ung isa na ang nagccontrol ay pressure switch, ung isa pemanent n nka on ang nagccontrol naman ay ecm malalaman mo ya kung alin s dalawang solenoid kpag e disconnect mo isa isa kpag nagwarning s monitor un ang pra ecm
same problem po.pc200-7 nka start engine at engage safety lock..isang solenoid no valtage pero pag disconnect naman.may voltage 24v.ang isa 24v pag nka disconnect..once connected naging 8v nalang
@@jillque3536 n try mo nb s bulb tester kung npapailaw nya doon s dlawang wire nang bawat solenoid,ska magwwarning yan s monitor kpag n disconnect mo ung solenoid n controller ang nagpapagana,nagwarning b? yang harnes ksi nyan hanggat d mo sya pinapagana nag hydraulic system nya pero dapat yan may supply n 24v tpos un nga kapag nag operate kna ung isang solenoid mawawalan nang supply ung isa ang nka maintain ang supply.
Sir patulong nmn po .. sa ginagawa ko .. kumatsu pc228 .. pag nakafull throttle sya at ngwork n taas baba po bigla rpm nya .. nglalaro po ung throttle motor nya .. kahit anu gamitin .. swing stick bucket travell o boom ..
try mo e disconnect ung speed sensor n nsa flywheel tingnan mo kung may pagbabago, kpag ganon p rin, e adjust mo ung tension rod nya pweding paigsiin mo o kya pahabain mo sya, or insfection mo harnes baka naputul or or nag short n sya doon s, pero check mo muna error code nya s monitor, bago mo gawin yang mga sinabi ko
Arm sensor is located at side of the control valve with separate brocket the function of that sensor is auto acceleration, and behind of the control valve is the main pressure monitoring
Ser sken ganian din.. Pag nagsabay ung swing saka travel namamatay ung makina or humihina.. Posible kayang ganian dun ung pwedengaging cause nung? Bago pangnunit nmin Ser ee.. D ako masyadong marunong sa hydraulic kaya marami ako matututunan sa inyo
paanung ayaw gumana,as in hindi gumagalaw o nagalaw sya pero hindi makaangat paanu b.ad mo ako sa whatsapp +971567581176, para makapag send k ng video or picture about s situation ng machine ha
ok ganito may time ksi n minsan kpag nagpalit nang bagung servo or accelerator motor ung socket nya d naibabalik nang maayos s brocket, kya nangyayari napuputol wire cause nang vibration, try nyo e check ang servo motor wire hatakin mo isa isa o kung ok ang wire, e try mo e disconnect ang rpm sensor, pag wla p rin, diagnose mo muna e check mo kong may active error, makikita mo doon, kung may damage wire or disconnected, maddtec nman nang ecm or controller.
haha sinsya na medyo sobra busy nmin ngayon, send mo nga s akin s whatsapp ung ung monitor at ung design ng accelerator motor, baka ksi iba yan s normal nmin n ginagamit, para alam ko kung anung klasing systema nyan wala ksi kaming ganyang modelo n machine dito s amin pero mag kkaroon ako ng idea s excavator, +971567581176
Ano poh whats app number nyo patulong poh ako sa unit ko pc 120-6 halos napanood kna poh lahat ng video nyo sir ang problema sa unit ngaun malakas po mga cylinder nyo pabalik halimbawa boom up mabaga boom down mabilis po ganun din sa travel.
Sir pa help po. Problem ko sa machine ko isa lng po solenoid valve nakakabit sa main pump ko. Minodify ata ng pinagbilhan ko. Nung mabili ko cia wala supply kuryente un solenoid kaya nahihirapan makina pg dumadakot. Btw pc228-2 po unit ko.
try mo e direct ung solenoid maglagay k ng dalawng separate wire s solenoid positive at direct wire s negative s body try mo kung gagaan ang galawan at load pra s makina, ang supply nyan galing s ignation switch pero dumaan s fuse
bro i dont know what is the problem exactly with your machine,if you can possible send me the picture or details regarding about your machine.whatsapp +971567581176
bro tell me what is the model of your machine, but if the machine is shutting off maybe overload or over pressure, if that machine is excavator check the solenoid attached on the main pump maybe no power, or not working or stock the valve
@@edgarbermudez3094 bro have you check the solenoid valve attached on the main pump, maybe no power to energize the valve, or if you know how to check the pressure check it, before you do the procedure of testing or adjustment, ok
s ganyang sitwasyon check k muna pressure ng main pump, or try mo n. rin e adjust ung merge divider valve nsa likod ng control valve, kung nsa ilalim k ng makina at nka harap k s control. valve nsa bandang kaliwa may adjuster ng pressure doon luwagan mo nut at adjust mo. ng screw driver pahigpit, saka testingin, try kahit isang ikot lang
Sir yung unit ko po Kya anong nangyari??pag uminit na po xia mahihirapan na po Ang makina nya,,namamatay po Ang makina pag nainit na..ok Naman po cooling system nya,,
@@caterpillarjhunhunk kapag po binibitawan ko Ang sable nya pag mainit na sya bumababa po Ang rpm nya..pag ginalaw ko po ulit tataas po ulit rpm nya tapos pag nahirapan po sya halimbawa po matigas Ang dinadakot ko dumadapa po Ang makina nya pag pinilit ko po namamatay po Ang makina
Brad maraming pweding pagmulqn ng mausok n makina, baka hindi na sservice ng maayos katulad nlang ng fuel filter, oil filter, and air filter, pero ok nman ang maintenance, check nyo blowby, or ung nagkaka roon n sya ng pressure s loob ng makina may talsik n kung tawagin deepstick kung nabuga n ng langis, pwede rin overload ang mkina dahil s hydraulic system.observe mo ung mga nsabi baka isa doon ang problema
sir sorry po ngayon ko lang nabasa message mo check mo muna power ng makina bka nsa makina lang ang problema, minsan kasi npaghihinalaan natin n hydraulic system ang problema pero d natin napansin n makina pla. ang problema, isang dahilan kinakapos s diesel, kpag walang load ok pero kpag ni load mo n ndapa makina, pero kung s plagay mo n malakas ang makina, check mo ung solenoid n nka attach s hydraulic pump baka wlang supply, pag wlang supply try mo e direct s battery ang supply saka testing kpag ganun pa rin, xontakin mo ako s whatsapp pra makapagusap tayo maayus +971567581176
At first step you need to do is check the main pressure of the main pump,on that way you well understand where the problem came from. Contac me i my whatsapp +971567581176
bro magcheck muna kyo nang pressure yung high pressure mula s pump kung ok yung pressure nang main pump, baka may problema ang load valve kung aling cylinder hose ang naputok o kya nman mahinang klase lang ang hose at yung pagkaka, grift nang hose, pero ma observe mo yan kung bakit naputok ang hose, isa rin s mraramdaman mo medyo hirap makina
Ser ptulong naman poh,about s pc220-5 n avance,problem q poh pag gnamt ng 2hours humihina ung boom up at bucket noh poh kya problema bgo n poh laman loob ng hydraulic pump.sna poh mtulungan nyo aq thanks poh
ok ganito basi s mga na experience ko kung alam mo yung valve s likod ng control valve doon pumasok ang main pressure ganito meron relief doon adjutable din yung try mo higpitan yung screw,pero luwagan mo muna ang locknut then observe mo testing,kpag nag ok sya on that way,higpitan mo pa ng kaunti then observe ulit until hindi n magbago ung movement
@@caterpillarjhunhunk n try q nrin poh mg adjust s line relief ng boom up at bucket.pti s main relief valve ng adjust at ngpalit n aq ng mga oring at nung needle jet.
@@altheasantiago6399 malakas b ang usok subra kpag ganun baka ung solenoid n nka install s gilid ng main pump eh hindi gumagana,kaya overload sya yung kasi ang nagrregulate ng pressure ng pump
Boss nagpalit me ng dalawang hose ng oil filter kc pumutok yong at luma na rin uomg isa kaya dalawa na pinalitan ko ngaun at nagchange oil na rin.pgkatapos ng chamge oil pag mgoperate ako may tunog naman na, iiiinnnnnggg..sa bandang oil pump or katabi ng oil pump na pinanggalingan ng hose na pinalitan ko po. Pg mgpwersa na sha may unsual sound na "iiiiiinnnnnggg... gnun po sound nya sa bamdang harapan malapit sa ilalim ng alternator o sa bamdang oil pump anu kaya possible cause nya? Ok lng ba ginagamit pa rin kahit gnun may tunog sha na umiiyak ba iiiiinnnnnng gnum po🤭
parehas b ung hose doon s original,n naikabit mo bago at nilinis nyo b bago ikinabit buksan nyo nlang muna ulit ung hose baka may sira ung loob ng hose kya parang may tunog,dati b wala sya tunog n ganyan bago p nasira
Mula lng po nung pinalitan ko hose nya kc pumutok.maliit ng konti lng po yong butas nya sa original.ngbleed me ng langis sa oil filter malakas naman po labas ng oil kaya nagdagdag ulit po 🤭
@@caterpillarjhunhunk wala po dati tunog na parang nahihirapan,iiiiinnngggg.....gnun ngy.nagkaroon lng ikinabit ko na bago na dalawa.at yong butas ng fittings na pinalit maliit ng konti sa orig nya
normaly ang test port ng komatsu ay 10mm head kailangan mo maglagay ng adaptor pra s gauge mo,kung main pressure check mo kung saan ung mainpipe nya nsa tapat lang noon ang testing port
Good pm po sir tanung ko po may pc 138us komatsu po ako anu po ang dipirincya non hirap umandar din pag nag travel himihina ang makina at namamatay..yan lang po sir tankyou po subcribe ko po kayu sir..
@@wenskieyb281 dito s video n ito may pinakita ako dyan n hydraulic pump tpos doon my wire n pink at black dalawa un check mo yan kung may supply o power n 24v habang nakaandar ha
bro sorry late reponse, regarding about low rpm, did you try to disconnect the rpm sensor, if not try it then check start. if same problem insfect the wiring harnes near in accelerator motor full slowly one by one the wires sometimes wire is damage inside, or maybe short or open wire, or check at service menu any error related on accelerator motor.
Sir, I messaged you on WhatsApp before and I would like to again have your number I have komatsu pc78-6, in relief we are getting 260kg on boom raise and 220 on boom lower. When we do compound function the boom circuit is about 50% slower than the arm and bucket. We have to let off of the left joystick 50% for it to be at the same speed as the boom raise. We did the PC tuneup and single function of boom raise was right on specification at 3.5seconds. but when operated compound it was very slow. It also travels very slow. We are getting correct pressure from pump. We swapped suction valves on boom circuit with arm circuit. No change nor improvement. Checked oil pressure on boom valve output going to boom cylinder and was 4KG lower than relief pressure. Boom holding valve held pressure and didn't drop. Poppet inside holding valve moves freely. Merge divider spool, LS unloading spools, logic valve spools all move freely with no apparent damage. Screens to logic valve were clean. We checked spring height on merge divider valve, was 1mm less than spec. Adjusted swash plate angle 1/4 turn out, and it made function worse. 1/4 turn in from original position didn't change how it operated in original position. Shop manual is stating safety suction valve is bad/ compensation valve is bad.
You are a Very Good man, Everyone not explain to all,,,
ok na po ser ung advece mo na bka wlang power ung solonoede tnx sa video
salamat sa tutorial boss lagi kitang panuorin sa lahat ng vedio mo
sige sir salamat ng marami, s support
Good job sir thank you for giving us your knowledge
Pwedi din po bang pakipaliwanag yong PC 200-3 OLSS type pump kong pano amg adjiusmemt sa engine backdown pag nag ooperate ma po yong machine.. Thanks po sa info
ask ko lng anu b ang main problem nang machine, engine o main hydraulic pump, lumang npaka lumang model n ito ah, pero ok lang, minsan kasi akala ntin nsa makina ang problema lalo n kpag naooperate, pero d natin n notice n nsa hydraulic system pla, pero meron din talaga n ang mkina n ang problema, hindi b mausok n nag makina mo o may backpressure n s breather, ask ko lang pra may reference ako s mga ppwede ko masabi, ngayon kung bagung ovehaul ang makina, ok malalaman mo nman yan, kung malakas ang pickup nang makina mo kpag nka idle k biglain mo nang full acceleretion, dapat kung ok makina mo bigla din sya n nka full accelerate pero kong nka full n tapos dahan dahan ang pagaccelerate nya may problema o low power talaga makina o mahina humatak.ppwede n magadvance timing or late timing or inspection mo muna ang makina mo, baka may mga dapat n nkakabit pero nakondem n o d n ikinabit. ha. o kya add mo ako s messenger jhunhunk pra makapag send k nang picture o kahit kaunting video pra makita ko ang sitwasyon
Hola muy buen tutorial falta en los de 200- 7 gracias
hello bro thanks for watching my videos.
Good job
Go ahead sir
Langsung is very interested
I am understand this matter
I am indian
thanks bro
@@caterpillarjhunhunk sir you whatsapp number???
00971567581176 watsapp
@@caterpillarjhunhunk sir country cod at frist in mobile number?
bro can you pls subscribe my channel and like, share
Nice information about system.
thanks bro
Thanks very well explained
your welcome bro
Chief,can you relay to us,how much the standard resistance for the two solenoid...if the reading is abnormal or no reading at all in ohms it causes the solenoid valve closed the passage of hydraulic fluid,am i right?God bless your channel it helps a lot to practitioners like me.
ser salamat poh marami poh akong natutuhan s inyo isa nlng poh problema k poh ser..ok nmn poh lahat ng power nya pero pag ka poh louded sya nauupos poh ang galit ng makina.pero s boom up lng poh sya hirap.tapos pag nagwarning poh battery lumalata din poh sya.ser..pc290 poh komatsu poh ser salamat ser..
kung may watsapp k 0567581176 o kya messenger jhunhunk pra makapagusap tyomaayos
May ganyan din kaming unit sir ganyan Ang trouble anokaya Ang nagging problema nya sir..
@@abetvits94 ang problema b eh ung nmamatay ang makina kpag nka full trigger k s boomup o arm in or out kpag ganun check mo muna ung dlawang solenoid doon s main pump, ang pag testing nya switch on mo tapos on mo ung safety lock ska mo e check ung supply dpat pareho un n may supply 24v kpag na start mo n mawawala ang supply nang isa ung isa lang ang permanent check mo un, kung may bulb tester k mas maganda ksi makikita mo n iilaw ang bulb ppwede rin n nagkapalit ang socket nya , plike and share n rin ang video ha salamat
@@caterpillarjhunhunk ok.po sir I check ko po salamat po
Good job sr
Well done job sir
thanks
Love you sir
this is well explained
thanks bro
Thank you
🙏
Thanks for the video. I have old 228 Komatsu excavator.. it won't shut off the engine even I turn off ignition and pull the key out. Engine is still running.. any idea?
bro give the specific model with -6-7-8 in witch dash model of your machine,so i can tell you what to do
Stepper motor is bad
Hi there my kohmatsu pc88 will not run the engine stall and low power..
but when I run emergency switch it runs perfectly..
any ideas?no problem with epc silonide it's new..
Contac me in my whatsapp+971567581176
Why you have not used the prolix switch to supply both coils LS AND PC
This video is just to share the simplies way to understand and find where the troubles located, this is base my own experience
Hi bro,
PC200-6 and PC200-7 are use same hydraulic pump and main control valve ?
i think the end model of dash 6 that almost same with dash 7
Sr I have a problem with my Komatsu.. I changed my hydraulic oil on my Komatsu.. After charging I the hydraulic was low and I topped up and it became too much. Then the plug at the front of the solenoid vavle come off due to pressure.. Since then the machine is busting the pilot hose and the hose which goes to the block behind the main control vavle.. It is lacking power if it gets power it bust the seal or bust a hose what might be the problem
bro i dont konw how thats happen you just change the oil in then, all the problem you told is came out saddenly,how thats happen,what type of grade of oil you used,before you do changing oil you never had any problem,contac me in my whatapp. +971567581176
Sir please show us how to link directly through video and thank you for the effort
im sorry i dont know what do you mean about linking video for what purpose
@@caterpillarjhunhunk I want to know if it has enough electricity or not so I ask you how to connect it directly from the battery
@@user-df9yn4hh2q for what? just enough electricity, i dont understand what are you talking about, bro you should have to discribe something what do you need.
Sir I have a komatsupc60-7 excavator I have a problem with it for the pass 3 years now and I can't fix it would love your help
ok can you tell me what kind of problem you have withyour machine tell me when the problem started. and also bro can you kindly share my video
تحياتي اعمل على حفارة كوماتسي ب200 في بعض الاحيان تتعطل عند رفع وهبوط اين بتكون مشكل
Sir can I ask the diagram and pin assignments for 12 pin DLC kumatsu pc138US 2005 year model
Whatsapp me +971567581176
Hey bro i have a komatsu pc2288uslc-3 and it reads overheat temperature as soon as the machine is started on a morning i have changed the coolant temperature sensor and it still reads high
ok bro thanks for contacting me,so regarding about the problem of your machine,i thinks it is electrical shorte on wiring harnes insfect the harnes maybe the harnes is touching to the body,but have you try,disconnect the temp sensor and try to switch on,if still the same,can you pls contac me in my whatsapp i need some pics about the monitor,+971567581176
Brother I have a problem whit my komatsu 220 lc6 the problem that I have is when the bucket is full the boom don’t go up soon enough any recomendation
actualy bro many reason why the is happens first maybe low pressure one of your pump that driving and giving pressure for the boom, at first you should have to check individualy your main pump, and also try to check your travel if one of the travel is slow meaning one of your pump low pressure, see this video bro, how to testing the main pump to know if main pump is low pressure, you have to use pressure gauge around 500bar gauge the attach the gauge where the main pipe pressure locate there is a small head of bolt you have to remove then attach gauge there, ok, czcams.com/video/mFUyGo0BxjY/video.html
Brother I have a problem what my komatsu pc270-7 the problem that I have is when the bucket is full the boom don't go down any recomendation
@@ishmaeldadzie7227 contac me in my whatapp +971567581176 for better conversation
Good morning bro
good day bro
Bro could you please help me to rectify the problem issue on my excavator pc200-8 not getting start when the engine is hot many thanks
hi sir,first thanks for messaging me,and giving the information about the problem that you are facing on your machine ,sir i just want to ask first before the problem is started,what did you observe,we want to know more ,for me to analys what is main cause of problem,contac me in my whatsapp for more better conversation,+971567581176
Any basic advice sir track malfunction forward & reverse not working what possible problem sir?
Hello sir some function of hydraulic system its working or not ,if not meaning maybe do you have problem on ppc lock, but if some function is working I think you should have to check hydraulic pressure and need to get high pressure at arround 350br
Sir magtanong lang po,pc200-6, sa main pump 2 solenoid, saan mag gagaling hydrauluc oil supply, ung nagawan ko sa main control nangaling, ung suply ng pump1 na pumunta main control valve, doon kumuha ng supply for pilot lever, pa ma ba yon, tnx
yes doon nga magmumula ang pilot supply isa s main supply kung saan nakalagay ung self reducing valve, andoon din ung pilot supply
Hi
We have pc220 with 20t breaker
When we are operating arm cylinder engine is getting switched off due to load pls help
what do you mean 20ton,can pls give me the complete details of your machine exact model number,then have try before that 20ton before or just first time.my whatsapp +971567581176,send picture regarding about the breaker and deatails of your machine
hello sir . i have same problem excator is doosan 300. i check the solenoid valve electric is available .but now have same problem means operating machine then almost stop machine. have any another problem sir?
bro can you add me in your watsapp if you so we can talk well, about your problem
+971567581176
have you check your monitor about any type of error its easy for me to give an idea were and how you can solve your problem
@Johnson hi bro i have doosan dx225lc 2008yr i have same problem loosing power onload and now pump getting too much heat did you sort your problem?
Thanks
@@gwajimagwajima bro can you pls subscribe my channel if i have any uploaded video you will be notify thanks
@@caterpillarjhunhunk thanks done bro
How to access monitor PC200-6 step by step for checking hydraulic main pump pressure, error code etc ?
contac me in my whatsapp for better conversation, +971567581176
@@caterpillarjhunhunk Thank you bro I got service manual now I can access it.
Hy mr.!
I have one Komatsu PC 210 LC 8 from 2008Fuel consumption is very high at about 18l / h. Do you have any idea why? The engine works well, it has power and does not emit smoke, it rarely happens that travel sistem it reduces my engine speed!
before applying any trouble shooting just check the main pump pressure.
Could you tell me what values the pump should indicate to me?
F.Pump and R.pump
@@alinbradea4810 the front is inner side rear pump is outer side
What is the pressure sitting of PC, LC and MRV?
Bro pls contac me in my whatsapp,+971567581176
@@caterpillarjhunhunkhello
Hii bro i have komtus excavater pc 220 totaly hydrolic system is not working so how can i troubleshooting
check the ppc lock solenoid located under the control valve
Good day Sir.. New subscriber here..ask ko lng po kong anu cause ng hydraulic overheating sa KOMATSU GD 755-5R na grader?. thanks po and more power sir..
s greader mga pweding dahilan ventilation, or over used n ang hydraulic oil mo, kung dipa npapalitang ang hydraulic filter mo, bka nagbabara n o hirap n makadaloy langis, pwede ring over pressure, at over yong flow limit nya.
@@caterpillarjhunhunk salamat po Sir.. Ngayon ko lng kasi naranasan to na grabi kabilis mg init yong hydraulic oil mga 10 minutes lng..
@@aljonnfernandez8889 ganun b kabilis uminit baka nman sira lang sensor check mo muna sender nya bka damage nya npaka impossible nyan in just a minute eh high temp n agad
@@caterpillarjhunhunk oo nga sir..napalitan ko na sir.. Hindi mo mahawakan mga hose sa sobrang init..pinalitan ko narin hydraulic pump at control..nag bago lng kunti..
@@aljonnfernandez8889 na e check mo nb ang pressure ng main pump mo ngayon baka over pressure sya o over din ang flow, tapos kpag ginagamit n kinokontrol ng operator pra lang d mamatay, ppwede talaga magoverheat kpag ganun, mag chexk k muna ng pressure pra sigurado pra may basihan k ha
Boss stedy ba un supply ng solonoid ng main pump
Kung ung s main pump ang gusto mong malaman yes pagka switch on nka on n rin un
sir what are the problem of komatsu pc160 engine is low power low rpm
sir can contac me in my whatsapp+971567581176
God job sur ara you filipino?
pinoy man po
its a nice job
THANKS
Hello I am from India have Komatsu PC 71my engine doesn't start, but if I losen MRV ON MAIN HYDRAULIC PUMP, ENGINE STARTS IMMEDIATELY, THAN WE TIGHT MRV FOR WORKING, IS THERE ANY SOLUTION
ok bro this is i want you to do, can you check the main pump if there is any solenoid attach on the main pump check it and see if we have power supply if solenoid available there.
@@caterpillarjhunhunk SIR mine machine hydraulic pump does not have any wiring, is there any thing I can check
contac me in my whatsapp +971567581176 and send me any picture of the model and serial number, and also pump and engine ok i try to find the model of your machine but i cannot find it
@@caterpillarjhunhunk Ok fine
Hello sir ano kaya problema ng komatsu PC 78us di sya tuloy tuloy umandar. 5 seconds lang tapos patay ulit.
sinsya n now ko lang nreplyan message mo,check mo muna fuel line baka nagbabara pwede s tanke pwde rin s mga hose,s mga ganyan problema pweding kinakapos sa fuel yan,check mo n rin electrical bka may nagllost contak
Sir anu po kayang dapat Gawin sa PC 228 - 6 Bigla pong humina
Please help have one machine pc210lc have some problems
tell me about the problem you are facing on your machine
Sir baka po pwd mag tanong solenoid ba prob ng backhou pc200 -8 if pag nasasagad ang sable e namamatay ang unit.
try mo brad o kya check mo kung may supply ung solenoid
ser ask ko lang po pg ng deeper po ako na ma2 tay po ang engene ko ganon din po kya yan
ask ko lang anung brand nang machine mo,kung same din nitong nsa video check mo ung solenoid,yan nsa side nang pump dlawa yan s unang start mo nang machine mo dapt ung solenoid pareho may supplytpos kpag nagoperate kna magauto off n ung isa at isa nlang ang gagana o may power,or kung may mssenger k add mo ako **jhunhunk**pra makapagusap tyo nang maayos
bka d kpa nka subscribe bka pwede subscribe k muna and hits mo yung bell and select all
@@caterpillarjhunhunk slamat p0 ser sge po try ko at nka pg subscrbe na po ako
Boss magandang araw ask ko lang Kung Anu problema Ng pc138-2 Yong travel gagalaw lang Ng kunti. salamat
mahina lahat nang function nya
Boss pa2long pc 138 dati hirap umandar pero nung napanuod ko video sinubukan kong. Nag direk sa bat.gumanda ang andar pero mahina naman ang galaw bagong over houl un makina main pump at control
Mag sukat k muna ng pressure ng main pump para may idea k kung saan nagmula ang problema
Hi sir i have apc50 mr when it work and become hot it slow and want to stall . Please help
you have watsapp give me so we can talk well
@@caterpillarjhunhunk oh yes thanks my no 5977253350.i am from suoth america . Suriname
@@hanoemanmanishkoemar2482 bro this number is your watsapp, can you pls include the country code
Soory for late reply. My country no is 0597 and whatapp no 7253350
I have a pc 160 it developed a problem , it starts in the morning and works perfect , but if you switch it off after like 2 hours it wont start ,
do i know which model dash pc160-6-7-8 i want to know that
@@caterpillarjhunhunki have the same issue, -7 model
Hey bro, I have a 1998 Komatsu pc-75 machine that’s 16,000 that bogs down when tracking it. It only happens when it warms up, could this be a fuel issue? I cleaned all the lines out and someone put a small electric fuel pump on it. Could the fuel pump not be putting o it enough fuel?
ok bro actualy its hard for me to say somthing regarding about your problem, usualy that type of engine you have on your machine is everythings manual ok,now asper my imagination that i dont know exactly what happen, but for better conversation can you please contac me in my whatsapp, +971567581176, give some picture about how the engine figure and fuel pump if you can, its for me and my refference to analys the problem.
@@caterpillarjhunhunk is there another way I can contact you? You don’t show up in WhatsApp
@@danielharrell2074 i dont know why not show up on you, so many people contacting in this number direct call and whatsapp message
Chef jhun ..ano Ang problem mahina mg steer Ang gamit ko n pc 220 ..
alin ang mahina kanan o kaliwa, ang left travel nyan front main pump ang nagpapagana, ung right travel nman ay rear pump ang nagpapagana individual, ang ksama s front pump, ay boom, bucket at travel, the rest pra sa rear pump n swing, arm at travel
Good morning sir please i have this komatsu pc210 and the is too much black smoke and the sound also is bad
observe and check oil level maybe your engine is damaging or eating oil,that cause of more smoke and annoying sound
Hello Master..
Ask ko lng kung alin s dalawa yung normally open or alin sir yung mag si switch off na solinoid during operation.. pc po b or ls....
brad sinsya n at ngayon lang nagreply, yung PC-epc ang permanent n may supply yan ung nsa bandang labas n nsa pagitan ng dalawang pump.ung isa LS-epc yan ung nsa bandang loob yan nman mag oon lang yan s starting time kpag nagenergize n o na on n ang ppc lock valve o ung lock s operator cab un nsa kaliwa n handle magooff n ung habang nag ooperate ang machine then kapag naka idle lang ulit makina or nagpapahinga magoon ssya to release pressure at mag free wheel lang makina habang nka neutral k.
@@caterpillarjhunhunk thank you po sir ..malaking tulong po sa akin
boss paano po e adjust dahil kapag makabitan ng rekta ang red wire humihina naman boom up at saka travel ng kanan motor
anu bang machine yan
Any video of Troubleshooting Hydraulic System.
what type of hydraulic system bro, play this video bro and pls bro do not skip the ads ha pls. check that video regarding some simple way of testing
czcams.com/video/mFUyGo0BxjY/video.html
PC 400
@@mosesjuma2478 pc 400 what?
How muuch the resistane solonoid sir?
hi, regarding about the solenoid we have so many type of solenoid and power input 12v 24v on dc about highier voltage is also same, thats defind on the size and where is using
contac me in my whatsapp for better coversation +971567581176
@@caterpillarjhunhunk Yes sir i know if voltage,but i meaning resistane of Ohm units..
bro i dont know what type of solenoid that you are look resistanse, many type of solenoid that we have and all of that diffirent resistanse just because of power input now if you are asking about komatsu in ppc lock solenoid that is ranging 20 to 60 omhs for 24v input
Hi bro my problem pilot prasar note se want to du ple explain brother
tell what type of problem you have on pilot control
if you have watsapp give me your watsapp number so we can talk and assist you about your problem
009660538002576
@@rajeshrai1011 ah you are in saudi arabia
Chief may idea ka po ba sa connection ng pressure reducing valve connection ng pc-228
bakit anu ang problema
@@caterpillarjhunhunk nawawala ang pressure sa boom up.tapos blik ulit tapos nawawala nmn.pareho cla ng stick out
kung alam mo ung valve na nakalagay s likod ng main control valve ang tawag doon ay merge divider doon meron din nka install n relief valve sa ganyang problema isa un s dahilan kung nwawalan ng power,pero kung nwawala wala o putol putol ang pag gana nya check nyo rin ung pilot supply baka naman ung solenoid nya nagooverheat n or pasera na,merge divider,at double stage solenoid baka hindi n nagffunction ng maayus inspection nyo muna ung electrical baka isa sa dahilan eh naandoon
sir magtatanung lang ako kung mayron ka wiring diagram para sa ls valve pc valve dahil natangal na ang mga number ng wiring para sa pump ng pc 200..
gawa k ng whatsapp account at message mo ako bigyan kita +971567581176
@@caterpillarjhunhunk Hello sir jhun...
@@patrickcunanan8626 yes boss anu b nag maipagllingkod ko
Good morning sir, pde ba gamitin pag dinirekta ung redwire ng solenoid sa battery, wla po ba masisira na iba...
Salamat po... Godbless
Komatsu pc228
Po ung unit ko, salamat po
pwede nman kya lang pang testing lang para s pag trouble shooting,kung mag ddirect ka observe mo ung solenoid bka mag over heat ksi hindi n nrregulate ung supply nya,n galing ecm
Swash plate angle sensors ?
bro no sensor for angle swash,only valve is available to control swash plate
sir good day from Philippines. need help with our pc200-7.... low power, changed main pump, still the same.. san po ba kayo pwede macontact? thanks in advance sir!
yes pwde mo ako kontakin s whatsapp,+971567581176 para mas mabilis ang conversation natin
Sir paano malaman kung normal working ang solenoid valve,,at ilan ba talaga ang voltage,, kc nung nag check ako 8volts na register sa tester, ang isa walang voltage,, nka start ang engine at nka engage. Pero slow idling pa
ppwede ko b malaman kung anung model nang machine mo, normaly kung nag machine ay dash 7 below supply nyan ay 24v pero kung dash 8 pataas may solenoid n ang nagccontrol ay ecm ung tinatawag n variable solenoid, yan eh kung komatsu.
ito p s first starting mo normaly ang solenoid nyan ay nka on lahat s dash 7 yan ha. tpos kpag nag operate kna magooff ung isa na ang nagccontrol ay pressure switch, ung isa pemanent n nka on ang nagccontrol naman ay ecm malalaman mo ya kung alin s dalawang solenoid kpag e disconnect mo isa isa kpag nagwarning s monitor un ang pra ecm
kya nman dapat ung dalawang solenoid ay gumana s unang start mo kasi pra hindi magbigay nang pressure o load s makina.
same problem po.pc200-7 nka start engine at engage safety lock..isang solenoid no valtage pero pag disconnect naman.may voltage 24v.ang isa 24v pag nka disconnect..once connected naging 8v nalang
@@jillque3536 n try mo nb s bulb tester kung npapailaw nya doon s dlawang wire nang bawat solenoid,ska magwwarning yan s monitor kpag n disconnect mo ung solenoid n controller ang nagpapagana,nagwarning b? yang harnes ksi nyan hanggat d mo sya pinapagana nag hydraulic system nya pero dapat yan may supply n 24v tpos un nga kapag nag operate kna ung isang solenoid mawawalan nang supply ung isa ang nka maintain ang supply.
Sir patulong nmn po .. sa ginagawa ko .. kumatsu pc228 .. pag nakafull throttle sya at ngwork n taas baba po bigla rpm nya .. nglalaro po ung throttle motor nya .. kahit anu gamitin .. swing stick bucket travell o boom ..
try mo e disconnect ung speed sensor n nsa flywheel tingnan mo kung may pagbabago, kpag ganon p rin, e adjust mo ung tension rod nya pweding paigsiin mo o kya pahabain mo sya, or insfection mo harnes baka naputul or or nag short n sya doon s, pero check mo muna error code nya s monitor, bago mo gawin yang mga sinabi ko
Where is arm sensor located sir. Pc228
Arm sensor is located at side of the control valve with separate brocket the function of that sensor is auto acceleration, and behind of the control valve is the main pressure monitoring
I have pc 200 komatsu display have E02 code error .machine all function is not working .somtime working vary slow .please give the slotion
bos can you contac me in my whatsapp,and send the details of problem model number and more +971567581176
Ser sken ganian din.. Pag nagsabay ung swing saka travel namamatay ung makina or humihina.. Posible kayang ganian dun ung pwedengaging cause nung? Bago pangnunit nmin Ser ee.. D ako masyadong marunong sa hydraulic kaya marami ako matututunan sa inyo
yes sir try mo check power supply nung solenoid s hydraulic pump dpat may power sya pareho bgo mo e start, pero dpat nka on lang muna ska mo check
salamat, pero pa subscribe mo nman channel ko pra at click mo ung bell botton pra update k s mga upload ko n video
add mo ako mssenger pra makapagusap tyo nang maayos,
(jhunhunk)
My power lahat ng soloniod nya Ser.. San kaya pwede maging cuase.. Ok nman ung mga fuse..
Baguhan palang po ako sa hydraulic kaya halos 0 knowledge pko d2.. Wala nman ako katulong na nakakaalam.. Truck mechanic lang po kase ako
Good morning Bro. Pwede ba pa hingi ng idea regarding sa Komatsu PC228US ayaw gumana Ang boom up. Ano kaya possible causes.?
paanung ayaw gumana,as in hindi gumagalaw o nagalaw sya pero hindi makaangat paanu b.ad mo ako sa whatsapp +971567581176, para makapag send k ng video or picture about s situation ng machine ha
@@caterpillarjhunhunksir salamt Po sa mga vedeo NYO,more power Po God bless,gusto korin Po matutu Ng mga ganyan trabaho,
sir gud pm,ano kaya ang posibling sira pag ung machine ay no acceleration ok nman ung governor control motor
ask ko lang anu model yan
kumatsu pc 228 po
ok ganito may time ksi n minsan kpag nagpalit nang bagung servo or accelerator motor ung socket nya d naibabalik nang maayos s brocket, kya nangyayari napuputol wire cause nang vibration, try nyo e check ang servo motor wire hatakin mo isa isa o kung ok ang wire, e try mo e disconnect ang rpm sensor, pag wla p rin, diagnose mo muna e check mo kong may active error, makikita mo doon, kung may damage wire or disconnected, maddtec nman nang ecm or controller.
p subscribe nman kung dkapa nkapag subscribe,thank for watching
@@greenly2769 saan location mo
Helow sir reques poh ako ng video tungkol sa pc 120-6 ayaaw mamatay sa susian at nawala poh ung rpm nya.ano ya prolema nito. Thanks po.
haha sinsya na medyo sobra busy nmin ngayon, send mo nga s akin s whatsapp ung ung monitor at ung design ng accelerator motor, baka ksi iba yan s normal nmin n ginagamit, para alam ko kung anung klasing systema nyan wala ksi kaming ganyang modelo n machine dito s amin pero mag kkaroon ako ng idea s excavator, +971567581176
Ano poh whats app number nyo patulong poh ako sa unit ko pc 120-6 halos napanood kna poh lahat ng video nyo sir ang problema sa unit ngaun malakas po mga cylinder nyo pabalik halimbawa boom up mabaga boom down mabilis po ganun din sa travel.
Boss,saan po speed sensor,pressure sensors location
isa lang nman speed sensor nyan nsa flywheel nsa gilid lang ng accelarator motor
good day sir new subcriber nyo po, ask kopo sana yung pc 228 ko mahina lahat ng galaw po, sabi po ng mechaniko computer box, salamat po sir,
hi sinsya n medyo late ang reply ko, pwede b contakin mo ako s whatsapp+971567581176, pra s iba pang info about s problem ng machine nyo
Sir pa help po. Problem ko sa machine ko isa lng po solenoid valve nakakabit sa main pump ko. Minodify ata ng pinagbilhan ko. Nung mabili ko cia wala supply kuryente un solenoid kaya nahihirapan makina pg dumadakot. Btw pc228-2 po unit ko.
try mo e direct ung solenoid maglagay k ng dalawng separate wire s solenoid positive at direct wire s negative s body try mo kung gagaan ang galawan at load pra s makina, ang supply nyan galing s ignation switch pero dumaan s fuse
pero ganito kung may whatsapp k contakin mo ako pra makapagusap tyo ng maayos, +971567581176
Hi my comothsu pc120 6 how to travel motor remove
bro i dont know what is the problem exactly with your machine,if you can possible send me the picture or details regarding about your machine.whatsapp +971567581176
My komatsu turns off randomly wen moving forward or picking something up
bro tell me what is the model of your machine, but if the machine is shutting off maybe overload or over pressure, if that machine is excavator check the solenoid attached on the main pump maybe no power, or not working or stock the valve
@@caterpillarjhunhunk model is komatsu pw 160 it has a banana grapple
@@edgarbermudez3094 bro have you check the solenoid valve attached on the main pump, maybe no power to energize the valve, or if you know how to check the pressure check it, before you do the procedure of testing or adjustment, ok
Ok thanks
@@edgarbermudez3094 your welcome
cat excavetor
fast boom over speed down
what problem
brother what do you mean fast boom,boom down very or boom up very slow,this is my whatsapp,+971567581176
@@caterpillarjhunhunk bom down very? up is good
1 video pls
Het Readwater probably sir Pc 120 please reply
bro what do you mean about, on your problem with your machine, i dont understand
Sir ano Po Ang problema Ng kumatzu PC200 pag dating Ng dalawang Oras Hindi na gumagalaw umihina cya thank Po sa sagot at godbless
s ganyang sitwasyon check k muna pressure ng main pump, or try mo n. rin e adjust ung merge divider valve nsa likod ng control valve, kung nsa ilalim k ng makina at nka harap k s control. valve nsa bandang kaliwa may adjuster ng pressure doon luwagan mo nut at adjust mo. ng screw driver pahigpit, saka testingin, try kahit isang ikot lang
Sir yung unit ko po Kya anong nangyari??pag uminit na po xia mahihirapan na po Ang makina nya,,namamatay po Ang makina pag nainit na..ok Naman po cooling system nya,,
sir baka nman pwede ko malaman kung anu machine mo para may idea ako, sa mga pwede kung sabihin anu.
@@caterpillarjhunhunk sir pc70 po avance
@@caterpillarjhunhunk dumadapa po Ang makina lalo na po kapag swing or steering
@@caterpillarjhunhunk stress na po ako sa unit eh..nag uumpisa po sya kapag almost 1hour na po syang nag ooperate
@@caterpillarjhunhunk kapag po binibitawan ko Ang sable nya pag mainit na sya bumababa po Ang rpm nya..pag ginalaw ko po ulit tataas po ulit rpm nya tapos pag nahirapan po sya halimbawa po matigas Ang dinadakot ko dumadapa po Ang makina nya pag pinilit ko po namamatay po Ang makina
I think both solutions current
From 350-700 mm amp
Thats depend on your situition bro observe the possibility reason of the problem
Pwede po makahingi manual ng pc200 xa mga solenoid
sinsya n at now ko lang nabasa message mo anu bang dash yang pc200 mo 6- 7 - 8
@@caterpillarjhunhunk Sorry po boss ngayun q lng nabasa pwede 6,7,8 nalang
Bosing bakit masok ang komatsu pc220 anong sira nito bosing
Brad maraming pweding pagmulqn ng mausok n makina, baka hindi na sservice ng maayos katulad nlang ng fuel filter, oil filter, and air filter, pero ok nman ang maintenance, check nyo blowby, or ung nagkaka roon n sya ng pressure s loob ng makina may talsik n kung tawagin deepstick kung nabuga n ng langis, pwede rin overload ang mkina dahil s hydraulic system.observe mo ung mga nsabi baka isa doon ang problema
Ser anu ba ibig sabihin ng pc sa backhoe na kumatsu.
anu b yan tinatanung mo its regarding on trouble o only at model initial
Sa komatsu PC78us lowpower problem sir namamatay ang makina pag inuoperate
sir sorry po ngayon ko lang nabasa message mo check mo muna power ng makina bka nsa makina lang ang problema, minsan kasi npaghihinalaan natin n hydraulic system ang problema pero d natin napansin n makina pla. ang problema, isang dahilan kinakapos s diesel, kpag walang load ok pero kpag ni load mo n ndapa makina, pero kung s plagay mo n malakas ang makina, check mo ung solenoid n nka attach s hydraulic pump baka wlang supply, pag wlang supply try mo e direct s battery ang supply saka testing kpag ganun pa rin, xontakin mo ako s whatsapp pra makapagusap tayo maayus +971567581176
Sir anung dahilan pag hindi na mag another power.
Paanung another power
sir how to fixet low power of pc220-6
At first step you need to do is check the main pressure of the main pump,on that way you well understand where the problem came from.
Contac me i my whatsapp +971567581176
Sir how can i cantact you
you can contac me in whatsapp +971567581175,and send me some details of what you need like pics or video
sir bakit po malimit akong mputukan ng hydraulic hose,magaan nman po ang binubuhat ko,,posible po bng mataas mxado ang rpm ko?
bro magcheck muna kyo nang pressure yung high pressure mula s pump kung ok yung pressure nang main pump, baka may problema ang load valve kung aling cylinder hose ang naputok o kya nman mahinang klase lang ang hose at yung pagkaka, grift nang hose, pero ma observe mo yan kung bakit naputok ang hose, isa rin s mraramdaman mo medyo hirap makina
san kba ngayon at anu unit mo
occ mindoro po,,pc 128 komatsu po
@@caterpillarjhunhunk tnx po sa advice
@@ahlfrenorongan6662 ok lang,ok nb machine mo
Ser ptulong naman poh,about s pc220-5 n avance,problem q poh pag gnamt ng 2hours humihina ung boom up at bucket noh poh kya problema bgo n poh laman loob ng hydraulic pump.sna poh mtulungan nyo aq thanks poh
ok ganito basi s mga na experience ko kung alam mo yung valve s likod ng control valve doon pumasok ang main pressure ganito meron relief doon adjutable din yung try mo higpitan yung screw,pero luwagan mo muna ang locknut then observe mo testing,kpag nag ok sya on that way,higpitan mo pa ng kaunti then observe ulit until hindi n magbago ung movement
@@caterpillarjhunhunk ung main relief poh vah adjust q.
@@caterpillarjhunhunk n try q nrin poh mg adjust s line relief ng boom up at bucket.pti s main relief valve ng adjust at ngpalit n aq ng mga oring at nung needle jet.
Ser pti poh ngbubuhol ung usok at namamatay pag ng boom up
@@altheasantiago6399 malakas b ang usok subra kpag ganun baka ung solenoid n nka install s gilid ng main pump eh hindi gumagana,kaya overload sya yung kasi ang nagrregulate ng pressure ng pump
Robit is good elections
Boss nagpalit me ng dalawang hose ng oil filter kc pumutok yong at luma na rin uomg isa kaya dalawa na pinalitan ko ngaun at nagchange oil na rin.pgkatapos ng chamge oil pag mgoperate ako may tunog naman na, iiiinnnnnggg..sa bandang oil pump or katabi ng oil pump na pinanggalingan ng hose na pinalitan ko po. Pg mgpwersa na sha may unsual sound na "iiiiiinnnnnggg... gnun po sound nya sa bamdang harapan malapit sa ilalim ng alternator o sa bamdang oil pump anu kaya possible cause nya? Ok lng ba ginagamit pa rin kahit gnun may tunog sha na umiiyak ba iiiiinnnnnng gnum po🤭
Pc200-8,model 2007 po pala sha salamat
parehas b ung hose doon s original,n naikabit mo bago at nilinis nyo b bago ikinabit buksan nyo nlang muna ulit ung hose baka may sira ung loob ng hose kya parang may tunog,dati b wala sya tunog n ganyan bago p nasira
inspect nyo ulit kung anu ang ikinabit nyo kung bakit nagkaroon ng tunog n kakaiba
Mula lng po nung pinalitan ko hose nya kc pumutok.maliit ng konti lng po yong butas nya sa original.ngbleed me ng langis sa oil filter malakas naman po labas ng oil kaya nagdagdag ulit po 🤭
@@caterpillarjhunhunk wala po dati tunog na parang nahihirapan,iiiiinnngggg.....gnun ngy.nagkaroon lng ikinabit ko na bago na dalawa.at yong butas ng fittings na pinalit maliit ng konti sa orig nya
Gud day sir,Test port of pc100 sir
normaly ang test port ng komatsu ay 10mm head kailangan mo maglagay ng adaptor pra s gauge mo,kung main pressure check mo kung saan ung mainpipe nya nsa tapat lang noon ang testing port
@@caterpillarjhunhunk salamat Po sir,pwede Po pahingi Ng picture kng saan banda
Salamat Po sir,sa long arm Po sir pc220 LS man manual Po kayo salamat Po
@@joeforneirbajuyo9276 mssage mo ako s whatsapp +971567581176 at details ng machine mo
@@caterpillarjhunhunk Hindi Po aq marunong mag wattsapp sir,ok lng Po dimasagot sir,para di nakayo madisturbo Po..salamat Po sir
Sir,pwede Po pahingi manual
anu bang manual wala k nman binibigay n detalye ,add mo ako s whatsapp +971567581176
Good pm po sir tanung ko po may pc 138us komatsu po ako anu po ang dipirincya non hirap umandar din pag nag travel himihina ang makina at namamatay..yan lang po sir tankyou po subcribe ko po kayu sir..
paanung hina b ok b rpm nya db mausok
slamat
send mo s akin mssger mo at add kita or add mo ako jhunhunk
Hinde nmn ma cyado maosok sir kahit malakas na ang rpm pag tinaas yung arm humihina ang makita pag pinilit namamatay cya..sir
@@wenskieyb281 dito s video n ito may pinakita ako dyan n hydraulic pump tpos doon my wire n pink at black dalawa un check mo yan kung may supply o power n 24v habang nakaandar ha
hi
hello darling
I have pc200-7 low rpm
bro sorry late reponse, regarding about low rpm, did you try to disconnect the rpm sensor, if not try it then check start. if same problem insfect the wiring harnes near in accelerator motor full slowly one by one the wires sometimes wire is damage inside, or maybe short or open wire, or check at service menu any error related on accelerator motor.
Sir, I messaged you on WhatsApp before and I would like to again have your number
I have komatsu pc78-6, in relief we are getting 260kg on boom raise and 220 on boom lower. When we do compound function the boom circuit is about 50% slower than the arm and bucket. We have to let off of the left joystick 50% for it to be at the same speed as the boom raise. We did the PC tuneup and single function of boom raise was right on specification at 3.5seconds. but when operated compound it was very slow. It also travels very slow. We are getting correct pressure from pump.
We swapped suction valves on boom circuit with arm circuit. No change nor improvement.
Checked oil pressure on boom valve output going to boom cylinder and was 4KG lower than relief pressure. Boom holding valve held pressure and didn't drop.
Poppet inside holding valve moves freely.
Merge divider spool, LS unloading spools, logic valve spools all move freely with no apparent damage.
Screens to logic valve were clean.
We checked spring height on merge divider valve, was 1mm less than spec.
Adjusted swash plate angle 1/4 turn out, and it made function worse. 1/4 turn in from original position didn't change how it operated in original position.
Shop manual is stating safety suction valve is bad/ compensation valve is bad.
Can you contac me in whatsapp,+971567581176 for faster way of conversation
Comatsu 350 excawetar trawling quick no wat working
Check pressure first ok