now take this structural model and add interior walls, you showed the warning error when you selected a wall instead of a structural wall, so how do you take this structural model and turn it into an architectural model?
Hello Balkan, how the steel beam is connected to the concrete wall? Is it simply supported or moment resistant to the core ? Any special clamp, anchor or whatever is needed at this point? Just if you can elaborate more on that. Thank you for the video, made me try on revit
Such good content, thank you! Please, any chance of you creating a tutorial of a roof top pool the building being steel frame and concrete slab floor? Thank you so much in advance!! :D
so now you have to keep your detail at fine always just to see these beams?? what if you just want to add a decorative I beam to a roof or balcony and not a complete steel construction?..
Hi Balkan, I want to know when you have a K series steel joist or joist girder that is at a roof and the joist is sloping, at the bearing seats; the seat is manufactured horizontal to the bearing point while the joist is sloped. Right now Revit shows the seat sloping so when you cut the section it's not shown correctly. Thanks in advance.
Hi. Hopefully you read comments. I faced a problem while scaling my project from 1:100 to 1:1000 All my number and axis annotations went huge because of that. I didn't mange to find any solution to that. Can you or anybody else help with that. Sure it is a common problem. However there are no videos of such type.
Hi.. I am having an error when i add structural beams or structural walls.."None of the created elements are visible in Floor Plan: Level 1 View...". Googled and applied all solutions of view tab and discipline change ...but to no avail. Hope you will help
You have gotten so many students through university with your tutorials, legend!
your videos are 10000000000 times better than the revit classes that i had in university
Thank you so much Balkan❤️
Please create a complete one. Having both architectural elements and structural ones❤️❤️❤️
Thanks a lot from morocco
You're videos are awesome!
youre the best .. sir tnx for this...
Thank you so much!
thank u so much balkan . i love u
Great job Balkan! Keep up the good work!
Very good content.. Thanks a lot Balkan
Can you please do one with cladding, like a warehouse storage build from start to finish
now take this structural model and add interior walls, you showed the warning error when you selected a wall instead of a structural wall, so how do you take this structural model and turn it into an architectural model?
thank you bro :)
Make a video on rebar detailing in structure. I have seen your previous videos. But plz show detailing of whole structure. A small structure.
you rule!!! thanks for the help
Hello Balkan, how the steel beam is connected to the concrete wall? Is it simply supported or moment resistant to the core ? Any special clamp, anchor or whatever is needed at this point? Just if you can elaborate more on that.
Thank you for the video, made me try on revit
Such good content, thank you!
Please, any chance of you creating a tutorial of a roof top pool the building being steel frame and concrete slab floor?
Thank you so much in advance!! :D
i would like to see dome construction like monolithic domes which use an air form to which you add concrete... please...
thank you very mach
God bless you
Nice job brooo
the beam system is floating from the end point not sitting on the main beam
Hi could you please soften the upper level sounds or use pop filter
Very good video
Thanks Mate!
Balkan architect - try justification instead of raising the bean system
See for normal steel structural columns, do you need rotate them 90 degree when there is a change of direction in order for the beams to fit????
Good job
You're too good and too fast, I set up x0.5 speed to watch the video haha
Lave, svaka cast! Jel ima di crna verzija Revita za skinut? Hvala i zivio
COOL.
What if we want to set the dimensions of the steel coloumn or beam? I mean, not using the template. Could you show the way?
Excuse me, can I request about modeling castellated beam and its connections?
so now you have to keep your detail at fine always just to see these beams?? what if you just want to add a decorative I beam to a roof or balcony and not a complete steel construction?..
Great video. For some reason when I cope the beams/columns, only one or 2 works? Could you assist?
Why not use OWSJ in between the main beams instead of smaller beams?
You rock
how do you get your metal decking to actually show up corrugated like that
Hi Balkan,
I want to know when you have a K series steel joist or joist girder that is at a roof and the joist is sloping, at the bearing seats; the seat is manufactured horizontal to the bearing point while the joist is sloped. Right now Revit shows the seat sloping so when you cut the section it's not shown correctly.
Thanks in advance.
Thanks v good 👍
Can you draw 5 floor steel scrctucer 5000m² ground floor area.. please can you draw it
Did you create the floor metal deck family, if so that’s brilliant.
Can you teach Piping and Ducting
How to calculate the depth of i beam
Awesome :)
How to create new reveal? Please explain
the beam system going in side the column it should be but same like cope, but how
Hi. Hopefully you read comments.
I faced a problem while scaling my project from 1:100 to 1:1000
All my number and axis annotations went huge because of that. I didn't mange to find any solution to that. Can you or anybody else help with that. Sure it is a common problem. However there are no videos of such type.
Can you make the Leeza SOHO building please?
how to perform structural analysis on this structure?
My trim and extend is not working.
How you made your levels show in 3d view? Thanks for tutorial.
How to design scaffolding please help
how did he get the steal beam famillies?
nothing you said works, offset, set it 8000....gos way out the screen...I dont understand this...I realy dont..
Hi.. I am having an error when i add structural beams or structural walls.."None of the created elements are visible in Floor Plan: Level 1 View...". Googled and applied all solutions of view tab and discipline change
...but to no avail. Hope you will help
Try to type 'vr' and adjust your view range
I only can see one type of beam anyone can help me?
How do you get the numbers
Total newbie, but I don't get the level lines in the 3d view at 4:02. I just get the box.
Levels in 3D view Only in revit 2019 version
Please, how can I add the Steel tab? Note that I use Rivet 2017.
I had the same problem. Download Revit 2019 for free and you have the Steel tab in your menu. Good luck.
@Wirsha Fatih thanks my dear .
beam system
Hi
lost you in 2 min.....I cant make the offset work...
You are too fast could you please slow down
Clearly you have a lot to offer regarding how Revit works. However, you have no idea how a structural steel building is framed.