YES YES YES! I was trying to connect it and could not figure it out! I finally figured it out by watching a video in Dutch..... Thanks for doing one in English!
When I click 'Add Present' under the 3D tab in Network Configuration, nothing happens. Both MA2 & MA3D have the same IP address, but they don't seem to be talking to each other. And it won't even let me input the IP address manually in the 3D tab in Network Configuration. Is there something I missed? I'm using v3.3.2.2.
After trying for 2 hours... from manual: The software version of the MA 3D and the console/onPC needs to be the same. MA 3D v.3.0.0.5 fits to grandMA2 console or onPC version 3.0.0. Important are the first 3 numbers. If you have different version numbers, there is no connection possible.
Hey Christian, is it possible to control the stepfade of a chasers with another executor fader? So e.g. you can make an "StepFade" master for all of your Chasers?
Hey Christian, I am trying as hard as I can to get the 3D and MA2 on PC to connect and no avail. At this point i Just want to give up on MA completely and us whats been working for me... I guess MA is just not meant to work for me....
Hey Christian, I was wondering if you were ever planning on doing that RZ mix or review, if you do is it possible for you to maybe put a cdj on the side? Because I was planning on getting an RZ and maybe getting a CDJ 2000 NXS 2 aswell. I would just love to see how they work together!
Curious, if I want to hook up a 2nd computer, what would I do? I'm confused! Thank you for your video:) I really wanna run 3D during the show on another computer!
Hi Christian, Could you please give me a helping hand with the 3D? The session is properly connected, I've patched my fixtures but only some of them are visible in stage view and 3D. Is there something that I'm missing in patching? I've created the fixtures myself because I could't find them in the library. Thanks for your help!
I got them connected but my show file doesn’t show up on MA 3D. All of my lights are in the middle of the room and on the ground, nothing changes. I’m pulling my fucking hair out trying to get this god damn visualizer working.
Hey Christian, I have a question. I followed all the instructions in this video, but when I go to my network config tab, under 3D, the version says 3.2.2.3 in red. My MA3D version is 3.1.2- Im not able to connect 3D to OnPC and i think that is the issue. Any suggestions?
I can "add present" but it will not lights up green the hostname and 3D says "standalone" but see the session on session tap. Anyone know what happend?
Hey Christian! Please continue making these MA2 videos they are really interesting!
Still working for V3.9 this was exactly what I needed. Thank you!
Thanks man, helped me a lot. I'm building lights for church this weekend and couldn't figure out how to get the program running lol.
YES YES YES! I was trying to connect it and could not figure it out! I finally figured it out by watching a video in Dutch..... Thanks for doing one in English!
Yes thanks for this video man! really was going crazy not getting it to work
love it, still applies in 2020
I was about to go crazy about this, can't thank you anymore!!
I have no present/ items when i try add new layer 3D in MA Network Configuration :
Thanks man, I keep coming back to this tutorial. Super helpful
Thank you so much Christian, i was searching the whole internet and just found your vid by accident, now i know it!! Thanks so much!!
thank you mr jacskon !!!! i'm borring all the day about this session member "yes" !!!! great thank's
Aw man this was very helpful, glad I could find it. Thank you so much!!!
you saved my show :)
It worked, thank you very much Christian!
Thank you so much Christian Jackson
Thank you. This video is really helpful still in 2021!!
Thank you for this.I couldn't find that missing Join button!
Thanks for this video- very helpful!!
Thank you so much!!
YES! THANK YOU! Great videos my man. Subbed.
Hi Chris, im stucked in the 3D where I need to set the IP of MA3D. Add present button does not respond. What did I missed? Thanks in advance.
Did you fixed it? I have the same issue
Yessss needed this so much!
Thank you !!! Only this video help me!! I connect ma2pc with 3d. You best!!))
thankyou so much sir
Thank you!
Merci l'artiste. Tu es bien sympathique.
Thanks a lot for this video ! I was just about to burn down my computer to find that join button !
God bless you sir.
Thank you very much !
Man, I was JUST having this problem. Thanks!
Thanks Champ
Gotchu.
yea i was having problems connecting.. might wanna make sure you have the right versions together also :)
thank you!
Helped me out! Thank you!
This is so useful, if only that had existed a month ago :)
It did. we had it!
Thanks!!! This video really helped
i live the video
Perfect ! You Saved me !
Its really helpful!!!
When I click 'Add Present' under the 3D tab in Network Configuration, nothing happens. Both MA2 & MA3D have the same IP address, but they don't seem to be talking to each other. And it won't even let me input the IP address manually in the 3D tab in Network Configuration. Is there something I missed? I'm using v3.3.2.2.
Nevermind, apparently for some reason it only works when I use the local 127.0.0.1 IP address for both.
Now they both won't stay on the loop back
After trying for 2 hours... from manual: The software version of the MA 3D and the console/onPC needs to be the same. MA 3D v.3.0.0.5 fits to grandMA2 console or onPC version 3.0.0. Important are the first 3 numbers. If you have different version numbers, there is no connection possible.
LorenZo-M I have exatly the same versione but it doesn't connect, can you help me?
@@DragonHeir8585 thanks so much dude
seriusly i love you
thank you
Thanks alot! The join button dissapears indeed :P
Thanks boss ! you saved me :)
Hey Christian,
is it possible to control the stepfade of a chasers with another executor fader? So e.g. you can make an "StepFade" master for all of your Chasers?
Hey Christian, I am trying as hard as I can to get the 3D and MA2 on PC to connect and no avail. At this point i Just want to give up on MA completely and us whats been working for me... I guess MA is just not meant to work for me....
Hey Christian, I was wondering if you were ever planning on doing that RZ mix or review, if you do is it possible for you to maybe put a cdj on the side? Because I was planning on getting an RZ and maybe getting a CDJ 2000 NXS 2 aswell. I would just love to see how they work together!
I am trying this with 3.4 but Net Control wont allow me to add a new Station. and nothing shows up in selct station when I go to Network config
What did you get figured out. ImHaving same problem
Why does my loopback speed connect at SLOW?
Are you ever available to Skype and explain writing Bome files?
thanks
holaaa Christian,,, thank you for the video...
i want to ask, how to enter the stage on ma 3d with sketchup file or 3dmax?
thank you for your time
Can you do a Martin garrix mix and a gear tour
Curious, if I want to hook up a 2nd computer, what would I do? I'm confused! Thank you for your video:) I really wanna run 3D during the show on another computer!
how much does MA3D cost? awesome video btw
Hi Christian,
Could you please give me a helping hand with the 3D? The session is properly connected, I've patched my fixtures but only some of them are visible in stage view and 3D. Is there something that I'm missing in patching? I've created the fixtures myself because I could't find them in the library.
Thanks for your help!
I got them connected but my show file doesn’t show up on MA 3D. All of my lights are in the middle of the room and on the ground, nothing changes. I’m pulling my fucking hair out trying to get this god damn visualizer working.
Hello, thank you so much for video, I did everything but session didn't change to green, can you help me, please?
the same happened to me, till I used the loopback IP 127.0.0.1 and then i suddenly worked fine!
Ok mine says master 1? And it lets me to threw your process, shows ip address but isn't allowing me to add
how do i reconnect when you leave
Hey Christian, I have a question. I followed all the instructions in this video, but when I go to my network config tab, under 3D, the version says 3.2.2.3 in red. My MA3D version is 3.1.2- Im not able to connect 3D to OnPC and i think that is the issue. Any suggestions?
yes, you need to have the same streaming version to be able to communicate.
+Christian Jackson how do I set them to have the same streaming version? I'm pretty sure I have the latest version of 3D.
Same problem here... how did you fix it? Where do I change in to the streaming version?
I can "add present" but it will not lights up green the hostname and 3D says "standalone" but see the session on session tap. Anyone know what happend?
Did you try right click on session member and choose yes? usually it taks a little bit and then it turns green and then it starts to sincronize.
Thangs
TOT you are the savior!!!!! i gonna kiss your feet!!!!
the worst interface.. honestly. thank you for the video and all te rest of the helpful videos.
this still doesn't work for me for some reason
Does not works.
cfg info pc? pls
Everything on MA is so needlessly complicated. These consoles suck IMO. I don’t care if they’re the industry standard. They suck.
thanks