If you've used XTOOL scanners for key programming as well as other brand scan tools, what can you say about speed, comparatively? I've generally found XTOOL faster than my Autel's generally. What's your experience? Let's talk!😃 Considering any of the XTOOL's? Checkout exclusive discount coupons on Amazon below - XTOOL IK618 - amzn.to/3Sv8uxt (Enter PiykeDIY as coupon code to get 8% OFF) - XTOOL D7 - amzn.to/3Z9X1Hj (Enter Piykecode as coupon to get 10% OFF) #ad
I think they should if you order it with your vehicle details, but I usually get the blanks and cut at a local locksmith. That gives me the best bang for my buck
Thank you I have the X tool D8. Hopefully I can use that. Now how do I get the key blanks cut further ignition? I actually have a valet key, but no master key lost it at the beach yesterday.
Hey, I got a 2009 Honda City (South East Asia) which was an automatic. Got into an accident had the transmission replaced to a manual. Now the car won’t start. The dash shows the key warning. Will I be able to reprogram the key with this method or you have other videos for this case?
Going from automatic to manual will definitely throw off the ECU if not done correctly. Unfortunately, this is not something I can advise on. Its best to stay with an automatic transmission.
Depends on how deep you want to go, D7, MK808 etc are good, but won't do all keys lost for some Lexus. You'll need an emulator. In that kind of scenario, the XTOOL IK618 with the KS100 accessory will be necessary. If you just want to add keys, the earlier options should be fine.
Hi. Confirmed. It will make a master key without an existing master key. As long as you have it cut and it can turn on the ignition. This is on a Totoya made for the US market.
Confirmed. It will make a master key without an existing master key. As long as you have it cut and it can turn on the ignition. This is for USA region Toyota.
If you've used XTOOL scanners for key programming as well as other brand scan tools, what can you say about speed, comparatively? I've generally found XTOOL faster than my Autel's generally. What's your experience? Let's talk!😃
Considering any of the XTOOL's? Checkout exclusive discount coupons on Amazon below
- XTOOL IK618 - amzn.to/3Sv8uxt (Enter PiykeDIY as coupon code to get 8% OFF)
- XTOOL D7 - amzn.to/3Z9X1Hj (Enter Piykecode as coupon to get 10% OFF)
#ad
Also, how do you get cut key blanks. Will Toyotta sell the blanks already cut?
I think they should if you order it with your vehicle details, but I usually get the blanks and cut at a local locksmith. That gives me the best bang for my buck
Support for Volkswagen for Audi for Skoda 4-generation 96-bit online, 5-generation online, MQB online key matching?
I think so, but check www.xtooltech.com/english/FunctionQuery.html to confirm.
Thank you I have the X tool D8. Hopefully I can use that. Now how do I get the key blanks cut further ignition? I actually have a valet key, but no master key lost it at the beach yesterday.
Men. You'll need to order a master blank. Then cut. The D8 will do it easily. I think valet vs master is in the chip not really the blade cut.
X tool D700 working all key lost function? The same process?
If you mean the XTOOL D7, yes. It's the same procedure.
Where did you get your key cut in order for you to program the key?
I had it cut at a local locksmith shop.
Hey, I got a 2009 Honda City (South East Asia) which was an automatic. Got into an accident had the transmission replaced to a manual. Now the car won’t start. The dash shows the key warning. Will I be able to reprogram the key with this method or you have other videos for this case?
Going from automatic to manual will definitely throw off the ECU if not done correctly. Unfortunately, this is not something I can advise on. Its best to stay with an automatic transmission.
Which programmers do you recommend or is best for programming keys for Honda/Acura and Toyota/Lexus in USA? Thanks.
Depends on how deep you want to go, D7, MK808 etc are good, but won't do all keys lost for some Lexus. You'll need an emulator. In that kind of scenario, the XTOOL IK618 with the KS100 accessory will be necessary. If you just want to add keys, the earlier options should be fine.
Will this pull ram truck pins? The d7 won’t do it for those trucks
Yes.
Can this tool be used to erase crash data from a srs module?thanks.
No
can this clone ecu or program mcu?
If you mean replacing an ECU, yes. But it depends on the car.
So can this programmer make a master key if all keys are lost?
Same model right? Let me play with this on the car and get back.
Yes, let me know.
thanks
Did you ever find this out?
Hi. Confirmed. It will make a master key without an existing master key. As long as you have it cut and it can turn on the ignition. This is on a Totoya made for the US market.
Confirmed. It will make a master key without an existing master key. As long as you have it cut and it can turn on the ignition. This is for USA region Toyota.