One thing he did not say is...Use a "heat gun" or your ol lady's "hair dryer" might work too but anyways heat the connectors, after a bit and a little wiggle they will come right out!...y'all are welcome
Im doing a engine swap from a 4.8 (2004) to a 5.3 (2002) the 04 has one plug and the 02 has two plugs can i swap the NSS from one to the other and it work?
Is this the same for every neutral switch? I noticed on my Pontiac g6 it takes a lil bit longer than normal for it to start, like 3-4 seconds and sometimes it doesn't start on the first try.
I got very lucky and used no heat and they came out. No breakage. Thank god
One thing he did not say is...Use a "heat gun" or your ol lady's "hair dryer" might work too but anyways heat the connectors, after a bit and a little wiggle they will come right out!...y'all are welcome
All you have do is heat the plugs up with heat gun or blow dryer and the connectors come out like butter
great info on how to adjust the switch!!!
Are all those wires JUST for sensing neutral/park?
Are they not also used for shifting gears and engaging the lockup solenoid of the TC?
This helped me get my truck started! Thank you so much!!!
We are happy that this helped, you're welcome!
Hey I did a 4l80e swap repinned harness truck won’t start👀 adjust switch still no start but eventually I found out in 2 gear
we have found that our electric heat gun will most of the time get the job done.
That's what i always use.
So, are you supposed to put silicone in there to seal connectors, every time new switches installed?
Im doing a engine swap from a 4.8 (2004) to a 5.3 (2002) the 04 has one plug and the 02 has two plugs can i swap the NSS from one to the other and it work?
Give us a call and we would love to help you out!
Thanks
Do you have any ideas for the 6L80E transmission?
i always use a little torch heat the plugs up and they come right out everytime
I got the ultimate tip for the harness !!!! I USE A HEAT GUN TO REMOVE THE PLUGS !
Great explaining
Is this the same for every neutral switch? I noticed on my Pontiac g6 it takes a lil bit longer than normal for it to start, like 3-4 seconds and sometimes it doesn't start on the first try.
We see that Thor Converter sticker :) Good info as always guys!
there is a tool to exactly adjust it. free with a gm replacement switch
Where is the NSS on a 2004 Cadillac Deville? Is it inside the transmission? I don’t see it outside of it.
The NSS on the 4T65E Transmission is internal you will have to drop the pan to get to it. Thank you for choosing Monster Transmissions.
Do you know if anyone makes a bracket to fit this type of switch to a 700R4?
We do not unfortunately
Can a switch be swapped for one with a different plug
They both bolt on the same way however they each take different wire harnesses.
@@MonsterTransmission the one I have has the same harness but torque converter doesn’t line up any suggestions
@@everydaycar3518 It may be the wrong converter difficult to tell without seeing
It’s a 2005 trans we got it bolted in everything’s working
How do you tell if it was actually rebuilt
Dang I was lucky mine didn't break
Use a lighter and heat the connector casings before pulling on the wires to loosen that glue n save yourself 50 bucks