Fuel Tank Install | DR650
Vložit
- čas přidán 31. 07. 2024
- Installation of the Acerbis 25L Fuel tank
I got kind of quiet in this video near the end. I was pretty tired and just wanted to get 'er done
Acerbis Fuel Tanks www.acerbis.com/motorsport/en...
Tank purchased from fortnine.ca/en/
For pictures and stories of this bike, its build, and adventures, check out / db.moto.adv
All music used in this video was created by Vexento - Auta a dopravní prostředky
I'm planning on upgrading my DR's fuel tank to basically the same setup you have.
Thanks for the video, it's very useful.
Great video thanks. I just ordered mine but I think I'll be using the stock petcock.
Measure hole location, drill small pilot hole to limit bit walking, then drill to size. Nice tank. A second petcock seems like the only way to functionally use all 6.6 gallons.
While I will admit that she has been on her side, and I knew full well she would be, I didn't want it to be common practice for fuel usage. This is why I opted for the second petcock.
Hey man, coolll got the tank, was wondering if you can use pet cock from original tank on one side ?
Also, was the rad on the right side in the way ?? You didn't mention, but thought I'd ask... seems close
How does sending the fuel line next to the engine itself do with the heat from the block? Does the line show any signs of overheating?
Greetings
Excellent detailed video 🇺🇸🍾🎉🇺🇸
Would you mind to share with us, your 2 years experience with the acerbis tank in a new video.
Thank you for assisting us. Keep producing more videos.
I have this tank and am about to add a second petcock so found your video useful though I don't think I'll be guessing where centre is for drilling the hole 😅 ATB Jason 👍
Good video - When I installed the 25L tank, I found the inside of the extension of the tank on RHS ( throttle side ) rubbed on the oil cooler - the standard Suzuki rubber tank mounts are too soft, when tank is full with fuel. I ended up putting extra thick/harder rubber on the top frame down tube, and on the sides to give tank more clearance. Did you find same problem with a full tank?
Sorry for the late reply. Haven't noticed yet to be honest. I don't see any sort of abrasion on the tank near the cooler. I did notice how soft the mounts were when installing, to the point that the bolt could be tightened right through the mount. I just didn't go that tight and let it have a bit of play. I actually haven't been on the bike yet since the big thaw, so I'll keep all of this in mind when I get the opportunity.
I had the same problem and have just installed a rubber spacer on each side utilising the bolt that holds the cable in position through to the cockpit. Hopefully that will help the sides stay out on a full load. If that doesn’t work the next plan is to take off the oil cooler mount and cut and re-weld the steel mount bringing it 5mm closer to the frame - bringing the top-external corner of the oil cooler in bit closer to the frame and providing greater clearance to the tank.
Hi, thx for the video. I just installed the 2nd petcock using your "instructions". Did you install additional, in-line fuel filters? Or do you think the filters on the petcocks can do the job? Did you remove the filter from the carburetor?
We got the same year dr 650. Im thinking about buying this gas tank. Did you find the added weight from the fuel had a negative impact on the front forks? Thx man. Keep em video coming!
Sorry for the late reply. When I installed the tank it was within a month of purchasing the bike, so I didn't have much time without the tank, and I was still getting a feel for the bike in general. Was also just passed the break-in period, so i was really not pushing the bike to any limits at that point.
Suspension is typically a recommended upgrade for the DR anyways, so that will be taken care of at some time in the future, but again, not enough time prior to the extra weight to really know for sure.
Did your tank come with 2petcocks or you had to order an extra?
Had to order an extra. The OEM petcock is not compatible with the tank.
You have the option of only running one, but as I stated, quite a bit stays in the low spots (which are larger because larger tank) and I didnt want to have to constantly tip over just to access my fuel. I just run them both open.
Have you found that the 25ltr Acerbis tank swells a bit so you can fit more fuel in ?
Not yet. My bike has been put away for the winter for about 3 months now :(
Yes, I have this tank on a DR, filled it once at the Bowser and it took 27 litres. Could have been a suspect pump but I doubt it was out by two litres for just 25 litres.
@@philj3955 Interesting... I have heard that the Safari's swell out upto 37 ltrs. Its not a bad thing as a little extra capacity never goes astray.
Do u mind me asking how much u paid for your Dr650 and did u buy it from a dealer?
Also did u have to make any adjustments to the carb?
Bought it new from dealer yes. I've not adjusted my carburetor.
Did ot come with 2 petcock
No gas filter on your line?
theres a filter in the OEM carb inlet
@@dbmotoadv2965 is that a mod or is that OEM filter? And what kind of filter? A fine screen or something better?