i love the way you take yoru time and so step by step on how to do things. i tried to replace my servo by myself and didnt notice the image on the back. so i shorted out my servo and blow my servo saver to pieces. thanks for your good work. you make this a lot easier for us newbies. keep up the great work
Un vero tutorial sulla manutenzione e sostituzione del servosterzo, ottima spiegazione e buone inquadrature mi aiuteranno a sostituire il pezzo, grazie del servizio
every other servo video I've seen on arrma 3s trucks don't take the whole electronic mount out and make this look like a serious headache. this makes it super simple, thank you
@@Hobby365 Yes it did. Got a 23T as replacement so I reused the servohorn. It seems that the 23T servo horn does not really fit und a Spectrum 23T replacement servo. Really bad. Had to put some pressure in to bring them together. At least it survived the first LiPo ride.
Excellent video. Specially newbies like myself these tutorials helps a lot . I have this truck v3 blx 3s version. Didnt have any issue yet but again only had few weeks now. Question- does this truck uses same size screw all around. Hex key correct or alan both same i think? Atleast during servo upgrade looks like you only need one size..
Great video. Helped to take it apart for sure. I need to replace my servo. I currently have a (ADS-5 5Kg) what would you recommend to replace it. It’s driven by an 8yr and an adult who acts like a kid🙋♂️. I’d like to upgrade but not very knowledgeable and need some advice.
I am so glad it helped. Really any servo above 100 oz-in of torque will work. Naturally I would recommend metal gear servos. The savox 0231 is a popular upgrade. One thing to keep in mind, you may need a new servo saver depending on what brand of servo you go with. if your servo horn is red you should be compatible with Futaba spline (25T) servos. Savox, protec, and futaba servos will be a good fit. Check out czcams.com/video/xvuGJUExEpA/video.html. I did a video on upgrading the servo. Its in a typhon but the process is the same.
What model is that dealt screwdriver please? I’m looking at buying something along them lines, and this looks real smooth.. really appreciate your reply, thank you. And great informative video.. 👍🏼😎
If I were to buy another one I would get this model with the clutch. I got mine long before this one was available: www.amazon.com/DEWALT-DCF680N2-Gyroscopic-Screwdriver-Battery/dp/B00DL7QDS2/ref=sr_1_3?dchild=1&gclid=Cj0KCQiAs5eCBhCBARIsAEhk4r6YWzip6V1FtGw6MzJK7j1uZKjVxERUvMFHSZ4xW0mvA6KVCOeRj3UaAhUQEALw_wcB&hvadid=177794050724&hvdev=c&hvlocphy=9011015&hvnetw=g&hvqmt=b&hvrand=15573172452160895955&hvtargid=kwd-72400204703&hydadcr=1670_9901586&keywords=dewalt+8v+gyroscopic+screwdriver&qid=1615217630&sr=8-3
So i replace it in my senton 3s step by step just how u did urs n i am still having problems with it it does not want to turn full left or right It berly moves its a second servo i try. The first one i though was bad but now with a brand new n still no movement what should i try n do any tips will help thanks
I have seen some instances of something blocking the bell crank arms from moving. A rock, a stick, even a stray screw could cause the issue. Try disconnecting the servo arm from the servo and move the steering with out a servo attached. To make sure the steering is moving freely. If you strike out there you may need to replace the servo saver.
I just purchased an arrma granite two weeks ago, I don’t abuse it or bash it hardly and my servo went out it won’t turn it does a buzzing sound and clicks when it tries to turn, brand new i hope arrma send me another one when i give them a call or hopefully my hobby town where i got it from can replace it
Same here they just sent me one this week bought it cpl weeks ago didn’t have them in stock till March so my hobby shop gave me an upgraded servo for there cost minus the cost of stock so I payed 10 bucks
Clicking noises is probably a stripped servo gear. That isn't normally covered by a "Warranty" as it is usually attributed to crash damage, but they may send you one anyway. Just give them a call and be honest. If you don't think you can tackle the repair defiantly reach out to your local Hobbytown.
@@nestorrangel6288 There are 3 different servo spline counts (ie: Spektrum is 23 tooth Hitech is 24 and futaba is 25) You probably have a servo that isn't compatible with your original servo saver.
I dont have a video for a 25t servo however it is the same process you just need to replace the servi saver with a 25t one. You can use part number ARAC8883 or KIM200.
its been a pretty confusing process for a lot of us ive come to find. theres so many ways ppl have recommended to do it, and a lot of the parts you need are out of stock every where or noobs like me are un sure of the other options. maybe a good topic for a new vid.
i love the way you take yoru time and so step by step on how to do things. i tried to replace my servo by myself and didnt notice the image on the back. so i shorted out my servo and blow my servo saver to pieces. thanks for your good work. you make this a lot easier for us newbies. keep up the great work
Un vero tutorial sulla manutenzione e sostituzione del servosterzo, ottima spiegazione e buone inquadrature mi aiuteranno a sostituire il pezzo, grazie del servizio
Nice job bro I had to watch it a few times, but very educational
every other servo video I've seen on arrma 3s trucks don't take the whole electronic mount out and make this look like a serious headache. this makes it super simple, thank you
You are very welcome. I am so happy to make this easier on you!
Great patience and recording skills. You are the best on the tube bro.
Thank you so much for the great complement. I am really glad it helped you.
I broke that little clip that hold the cable on the side minute 7:29, apart from that it was a very helpful video thanks.
Brilliant video helped me change my servo . Brand new to the Rc world so thanks
Amazing video and super helpful, thank you so much!!! 😄😄😄
Thank you so much for the feed back. I am glad it helped.
Thanks bro! Because of you my Arrma Granite is back in action!!💪🏾🥶
So glad it helped you out
Having to replace the servo in my boy's BRCC. Very helpful. Thanks !
I am so glad that it helped you out.
Grate video definitely helped me out when I put my servo in 🚚
That is the kind of feed back I love. I am so happy it helped you out.
I'm replacing the servo in my Granite. This is a great help, thank you.👍🏻
I am so glad it helped you.
@@Hobby365 I'm also going to replacing the receiver with the Flysky Noble NB4 receiver. I'll do both servo and receiver together. 👍🏻👍🏻☺️
Thank you so much worked great on my arrma big rock
I am so happy it helped you.
Great video, definitely helpful for beginners like me. Thanks a lot!
I am glad it helped you get your servo replaced
@@Hobby365 Yes it did. Got a 23T as replacement so I reused the servohorn. It seems that the 23T servo horn does not really fit und a Spectrum 23T replacement servo. Really bad. Had to put some pressure in to bring them together. At least it survived the first LiPo ride.
Awesome 🎉
Great instructional video 👍
Thank you for the feed back.
Awesome guide!! Even if I didn't make it right :D
I am so glad it helped you out.
I use the Same gyroscopic screwdriver they are freaking amazing not many people know about them I don’t think
It is one of my favorite tools.
Thank you
You are welcome
Great video thank you.👍👍💯💯
Thank you, I hoped it helped you out.
Excellent video. Specially newbies like myself these tutorials helps a lot . I have this truck v3 blx 3s version. Didnt have any issue yet but again only had few weeks now. Question- does this truck uses same size screw all around. Hex key correct or alan both same i think? Atleast during servo upgrade looks like you only need one size..
For the servo upgrade you only need one size which is the 2mm. The other sizes you need for the rest of the truck is 1.5mm and 2.5mm.
Thanks for shearing will these tires fit senton n body
The granite tires will fit the senton. Chassis but will create some clearance issues with the body. You will to creatively lift and trim the body.
Great video. Helped to take it apart for sure.
I need to replace my servo. I currently have a (ADS-5 5Kg) what would you recommend to replace it. It’s driven by an 8yr and an adult who acts like a kid🙋♂️. I’d like to upgrade but not very knowledgeable and need some advice.
I am so glad it helped. Really any servo above 100 oz-in of torque will work. Naturally I would recommend metal gear servos. The savox 0231 is a popular upgrade. One thing to keep in mind, you may need a new servo saver depending on what brand of servo you go with. if your servo horn is red you should be compatible with Futaba spline (25T) servos. Savox, protec, and futaba servos will be a good fit. Check out czcams.com/video/xvuGJUExEpA/video.html. I did a video on upgrading the servo. Its in a typhon but the process is the same.
What model is that dealt screwdriver please? I’m looking at buying something along them lines, and this looks real smooth.. really appreciate your reply, thank you. And great informative video.. 👍🏼😎
If I were to buy another one I would get this model with the clutch. I got mine long before this one was available:
www.amazon.com/DEWALT-DCF680N2-Gyroscopic-Screwdriver-Battery/dp/B00DL7QDS2/ref=sr_1_3?dchild=1&gclid=Cj0KCQiAs5eCBhCBARIsAEhk4r6YWzip6V1FtGw6MzJK7j1uZKjVxERUvMFHSZ4xW0mvA6KVCOeRj3UaAhUQEALw_wcB&hvadid=177794050724&hvdev=c&hvlocphy=9011015&hvnetw=g&hvqmt=b&hvrand=15573172452160895955&hvtargid=kwd-72400204703&hydadcr=1670_9901586&keywords=dewalt+8v+gyroscopic+screwdriver&qid=1615217630&sr=8-3
So i replace it in my senton 3s step by step just how u did urs n i am still having problems with it it does not want to turn full left or right It berly moves its a second servo i try. The first one i though was bad but now with a brand new n still no movement what should i try n do any tips will help thanks
I have seen some instances of something blocking the bell crank arms from moving. A rock, a stick, even a stray screw could cause the issue. Try disconnecting the servo arm from the servo and move the steering with out a servo attached. To make sure the steering is moving freely. If you strike out there you may need to replace the servo saver.
Nice video, I did it a different way and now I feel like an idiot haha
So long as you got it done that is what matters!
Thanks for the video! I was stumped on mounting the servo saver at zero for a minute then I remembered oh yeah CZcams! I’m a dummy lol
I am so glad it helped you That is why I am doing these videos.
Thanks
Your welcome. I am glad it helped.
I just purchased an arrma granite two weeks ago, I don’t abuse it or bash it hardly and my servo went out it won’t turn it does a buzzing sound and clicks when it tries to turn, brand new i hope arrma send me another one when i give them a call or hopefully my hobby town where i got it from can replace it
Same here they just sent me one this week bought it cpl weeks ago didn’t have them in stock till March so my hobby shop gave me an upgraded servo for there cost minus the cost of stock so I payed 10 bucks
But I drive it hard triple back flips all day long
Clicking noises is probably a stripped servo gear. That isn't normally covered by a "Warranty" as it is usually attributed to crash damage, but they may send you one anyway. Just give them a call and be honest. If you don't think you can tackle the repair defiantly reach out to your local Hobbytown.
None of the 3 servos i already have fits the servo saver idk which one to get that’ll fit
@@nestorrangel6288 There are 3 different servo spline counts (ie: Spektrum is 23 tooth Hitech is 24 and futaba is 25) You probably have a servo that isn't compatible with your original servo saver.
What size Allen wrenches
2mm and 2.5mm are the sizes you need.
Hi how come you had to change the servo?
I didn't have to replace the servo. I just wanted to show people how easy it was.
do you have a video where you do a 25t servo saver?
I dont have a video for a 25t servo however it is the same process you just need to replace the servi saver with a 25t one. You can use part number ARAC8883 or KIM200.
its been a pretty confusing process for a lot of us ive come to find. theres so many ways ppl have recommended to do it, and a lot of the parts you need are out of stock every where or noobs like me are un sure of the other options. maybe a good topic for a new vid.
@@durkadann2943 I will see if I can get a video in the que for you. Thank you for the suggestion.
Yeah I just changed my servo the ones that Arma comes with their junk
Glad you got an upgrade. They are always worth upgrading.
I enjoyed a great video let's be friends.!
우리 친구 해요.!
😁😁