What The Pros Know About Drum Recording
VloĆŸit
- Äas pĆidĂĄn 24. 08. 2021
- In this episode I will show you all the steps to getting great drum sounds. We will cover Mic choice, Placement, EQ, Double Mic'ing, Phase and Tone.
đž 45% OFF The NEW Quick Lessons Pro Course - Use Code RB250 âąquicklessons.pro
đ 45% OFF The Beato Ear Training Bundle - Use Code RB250 âą beatoeartraining.com/
đ 65% OFF The Beato Book 4 Bundle - Use Coupon Code: RB250 - Get It Here: âą rickbeato.com/
THE BEATO CLUB â bit.ly/322AGO1
MY HELIX PRESETS âflatfiv.co/products/rick-beat...
SUBSCRIBE HERE â bit.ly/2eEs9gX
--------------------------------------
My Links to Follow:
CZcams - / rickbeato
Follow my Instagram - / rickbeato1 - Hudba
This is a terrific video that Rick has produced here! I would add, for your consideration, the following:
On most drums, the two heads are significantly separated from each other and, as a result, the resonant head will naturally vibrate a fraction of a second later than the batter head, and then some of this sound bounces back re-implicating the batter head. This means that baked into the drum when played are complex phase relationships that also, to some extent, vary by the set of frequencies emanating from the batter head and the shell as sound reaches the resonant head. These phase effects are relatively complex, and are also dependent, as a factor, on the type of heads used, stick type, playing style, how tight the snares are (for a snare drum), shell material, the head tensioning, the type of bearing edges, and if any dampening/muffling is used.
My point is that the "natural" sound of a two-headed drum has baked in numerous phases cancellations "and" boostings going on that depend on the factors I've mentioned above. By "boosting" I'm referring to the extent that increases in amplitude occur when phase frequencies become aligned; cancellations happen to the extent that phase frequencies are non-aligned. It can get more technical but that's an overview. The mics (their number, type and location/position) have their work cut out to capture a simulacrum of the drum's sounds! We're all trying to capture an instrument that itself has phase problems or delights, depending on one's perspective.
Hey Rick, just wanted to tell you that a drummer passed away tonight, Ron bushy from the Iron Butterfly died at 79. He was a good friend of mine I played music with him in the 70s
Man that sucks. Sorry for your loss.
Sorry for your loss
Sad to hear, the architect of one of the most renowned drum solos ever.
@@Randgalf In A Gadda A Vida, baby forever. Ron Bushy, great drummer for heavy psychedelic Iron Butterfly, first classic extended drum solo that will live forever. R.I.P.
Very sorry to hear it. I hope Rick somehow pays his respects here & might end up getting some new ears appreciating Ron's legacy.
This is incredibly helpful. Iâm only a few years into micâing & mixing live drums and itâs the straightforward detailed videos like yours that are the most helpful to get a grasp on technique. Appreciate ya!
I know the stuff already, but just wanna compliment you on this fabulous tutorial you've made! The topic litterally cannot be condensed into a more concise and clear and accessible video. 14 minutes with an hour of info.
With such a great player and kit and setup, it's also an awesome demonstration (and reminder) of how great a sound you can get at the source!
This is pure gold. We are so lucky to have access to this level of detailed knowledge and experience recording drums. Until youâve spent countless hours trying to get good balanced live drum recordings you don't understand just how valuable this is! You'll recording something and compare to another drummer you admire and wonder how the heck did they get that drum sound. This is how! And it isn't something you can learn from a textbook. Maybe you can figure it out on your own but it will take decades of trial and error. Thank you Rick from the bottom of my heart for making this video!
Rick! Iâve been watching your stuff for years and it always inspires me. Musically speaking, you are the man Iâd like to be when I am grown up! (I am 30 but Iâve got time to grow up again.)
Your breadth of knowledge on music and the industry is staggering, and you are an inspiration to us all.
Thank you for what you do!
I donât even record music, I just like hearing Rick talk about it.
If Rick told about numismatics and stamps, I would still watch his videos in complete awe. He is a born storyteller. He could recite the Tokyo phone book and make it interesting enough!
I don't record music either. I was curious about how many mics and channels it would take to record drums. I was definitely enjoying and very interested in everything he had say. This is the first time I ever came across this guy. He's good!
That's for sure.
well yuh dude that's what being a musician is
Great video- one thing I had to learn over time that its not just about flipping phase, often two signals have the same "type" of phase but they are just out of alignment with each other. In fact, the opposite phase phenomenon is usually only encountered when micing bottoms of drums, and behind open back guitar cabinets. 90% of the time, Im zooming in and nudging waveforms to fix phase problems, not flipping the phase. A waveform thats 50% off axis with another will sound just as out of phase when flipped.
Thank God somebody addressed the issue of phase relationship, which is the single most critical factor in recording anything, let alone drums. Brilliant presentation, Mr. Beato. As a 50+ year, gold awarded engineer, I can appreciate this a lot. I would like to address the use of the overheads and what I believe to be the best possible placement thereof. For maximum stereo separation with the least amount of phase cancellation, the plane of the mic diaphragms should be exactly perpendicular - 90 degrees to each other. The ORFT method / system called for a separation of about 7 inches and an angle of 120 degrees, supposedly most closely approximating the way human ears receive sound. When overheads are properly placed, the overall drum sound from these mics alone is the purest and most natural.
This is my broken record spiel, but I kind of want to point out how "approximating the way human ears receive sound" isn't necessarily the way to go. I mean, there is a lot of truth in there as far as typical recordings, genres and settings are concerned where you want to fall back on an "optimal" way to mic your drums, but at the same time there is just so much in the way of stylistic emphasis and articulation that begs for people to just do everything to taste; it should fit your arrangement and your mix more so than cookie-cutter conventions people have come to accept over the years. In my book, there is no such thing as purest and most natural. The thing most closely matching this description is whatever fits your song or performance, and that is just not something you can capture in specs... at least not quite.
@@minhuang8848 Excellent comment, Min!!
@@minhuang8848mess with them until they sound correct. Got it. â€
Hi, Rick
Iâm not a musician but your videos, on this and your other channel, have helped me appreciate the technical and performance subtleties that I might have overlooked or not known.
Thank you.
Thanks, Rick. Love the behind the scenes workings of how you capture the best sounds.â€ïž
I am a long time drummer, live here in the Atlanta area, and I always find your videos to be informative, with similar techniques (tuning, micing, etc.) that I employ as well. Glad to know I have validation through your experience and teachings!
Thank You for taking your time on this video.
Very cool. Thanks for showing us the behind-the-scenes stuff. Great drum performances too!
Rick, you are the best! Love the way you get into it - every second is useful and informative. Thanks so much!
amazingly helpful and cant wait to try it. Thanks!!
Been looking for a good video on drum recording and phase everywhere. Thanks Rick!
Really love the sound you got here! Kick drum sounds amazing!
Thanks Rick! These music production vids are super helpful
This felt like a physics course on recording/miking drums. I understood everthing. Excellent stuff.
Brilliant video, Rick! Really puts into perspective how your techniques make the sound of the drum recordings better overall.
Awesome video. Very helpful. Thanks Ric
Thank you very much Rick! I always take what I learn from your channel and apply it to my own. I like the way you break everything down to make it very simple until even I can understand it.
Yes! I have missed the recording tips videos. Great one!
People talk about the piece of gear that got away. Looking at the drum set reminds me of mine. When I was 18 years old I played drums, and somehow ended up with a Paiste 22" ride that had been Mick Fleetwood's. I sold it with a whole kit a year later to pay for a trip. It also had a vintage A Ziljian 18" cymbal.
Thanks for this Rick! We may not have the same gear as you but at least we can learn and use what we have properly. With your content , I suspect that home demos and recordings are going to be next level!
This is incredible. Thanks a lot for sharing your expertise. Most valuable video explanation I have seen yet! And this in almost no time. Incredible.
As an audio engineer I must admit ,that this is a good entry into drum recording knowledge...Within the years , you will get more and more wisdom but in the end , always trust your ears and dont get lost in the technical jungle ...
Great video Rick, I think it would also be helpful to people who are relatively new to mic'ing drums in the studio to emphasis how crucial the room sound is to a good drum recording. A small room with super fast reflections will often kill a drum sound stone dead. I built a few studios back in the day and the first one took me a long time to accept that my live room was just too small to create a useful drum sound. In the end I added a ton of Rockwool panels in mesh liners and it changed the drums, ( especially the toms) out of all recognition. One of my most successful Metal albums was done with the kit in a VoiceOver booth completely covered in acoustic tiles ( I only accepted the session on condition the booth stayed put due to other commitments and it was a beast to dismantle!) I added a great studio reverb and it absolutely killed.. no one was more surprised than me.
Amazing drum sound! Very open sounding and natural.
Super informative! Thnx again man.
Jackâs got a great groove to his playing. Some meaty chops too.
Once again, Rick explains what for us in magic into something that I can understand and employment in my music. thank you Rick, just great stuff
Amazing Rick, I need to listen that OHs, and if you can, show the signal flow, pre/insert!
I do this technique at work all the time.
I'm 22, budding interest in music production and I have no idea what he's talking about like 70% of the time but I really appreciate this exists đ„șđâ€ïž
@Lilly Liz, do you have any specific questions?
@@dfinma Ohh specifically where he talks about his pre-amps. I know roughly why it's good to use them but I've never seen any in your typical minimal/beginner setup videos and I can only suppose different preamps work better with certain mics but I have no knowledge whatsoever. And at what point between making music on a laptop in your bedroom and recording a full band should they get introduced? đ Sorry if this is super dumb.
@@lisapatscheider Every microphone needs a preamp (except for ones w/ built-in, which you generally don't want) and all audio interfaces and mixing boards have them. The question is how fancy do you want to be. Outboard preamps (and outboard gear in general) might be used by pros based on preference, experience, budget and equipment they have acquired decades ago before modern conveniences.
But don't worry about it. The good news is modern recording equipment, audio interfaces in particular, are servicable well into the semi-pro range and fancy preamps are toward the end of the list of what you need for making a great recording. It starts with the material and performance, then recording technique, perhaps the room, mixing, instruments (as long as they enhance the performance), microphones, then maybe fancy preamps.
@@dfinma Ohhh thank you for the insight!! Yeah that explains why I haven't seen them, I've mostly been experimenting with interfaces đ
Rick shows how hard work is recording, produce music is.
Produce music is like play different (another or all of them ;-) ) instrument, with knowledge , passion, discovery-journey thing.
Very exciting and productive.
There should be more videos about creation process of the music (art overall, movies etc) to show people what they paying for. For hard work and dedication/passion.
From "A" to the "Z". It gives awareness for all those easy grabbing/sharing art stuff.
Its normal, standard work to live from (for all of them, artists) and should be payd and appreciated.
Thankful & Greatfull.
-Bart
Rick, listening to you speaking about these techniques and hearing how incredibly marvelous and thick those drums sound is like spreading melted butter on warm toast on a beautiful spring morning. Man, those drums sound sick without even putting any process on them, wow! It's like it already mixed itself. That's amazing engineering there.
I'm glad to hear this again!
Wow! What can you say?? I enjoy this stuff thatâs way beyond my understanding, but thereâs so much content on this channel for amateur music guys like me to actually use also. This is really the best CZcams channel for any of us to get straight to the point on any subject the title mentions. Bad ass!!!
Thanks for the info, I will definitely explore the bottom mics on toms technique.
superb video, many thanks
great sounding toms, the 414's on top and 421's on the bottom are a great combo.
ages ago i saw nick didia and brendan o'brien double mic toms with 421's and nick just used a simple y microphone cable with one side wired out of phase. that way you get the top and bottom sounds, but use only one mic preamp. been doing this for years. works great.
thanks for such great stuff, rick.
Great stuff buddy thanks!
Incredible drum sound & playing! This is the best info. Cheers from an old Las Vegas drummer!!
Fantastic!! Love seeing this stuff and would love seeing more. Any chance of doing one with your B3?
Kick drum sounds incredible. I've been wanting to try double micing toms a la Steve Albini. It seems so much easier to get a balance of snappy attack and fat sustain
This is a fantastic video, thank you!
08:37 That kick really does sound good. It might need a little more clarity/attack in a mix, but it sounds so gooey and nice.
Now when I record Iâm going to to that top and bottom heads thanks for video !!!!it actually makes sense doing it that way .
Your knowledge of this stuff is impressive Rick. Hard not to get gear envy even if I have no use for a pro setup like this.
Beautiful, to the point, presentation and explanation of some extremely important studio recording techniques. I don't like ProTools but I really appreciate your Pro Tips. Shalom.
Fantastic Rick I appreciate this not just as a drummer but also technically . Thank you . As always stellar video
Loving this Rick. Andy Johns was a genius and had a very scientific approach to recording drums. Well worth checking out too. Thanks again Rick ...brilliant post as usual.
Nice one Rick, just watched it twice. The double mic'ing sounds much better, sounds like when playing my kit, much fuller & rounded. The single sounds a bit short & the slight delay between top & bottom helps to lengthen the note. Keep up the good work.
Loved this! Need to play with some bottom tom micing now
Great video! Cheers
Thank you Rick for the video I learned some today
Damn Rick! Iâm really enjoying your video catalog - one of the coolest channels on CZcams!
Superb! Thanks Rick for a cracking video on Production and Mic placement! I'm doing a degree course in Popular Music Production and Performance, and it reminded me of exactly what our tutor Alex says is very important about placement! As you rightly say, that mix of resonant and playing side of the drums, truly enriches the recording, and it would be foolhardy not to include it to get that fuller sound!
ace video thank you! Didn't realise until now just what a difference having mics on the bottoms of the toms makes
These sound AMAZING
Cool stuff! Some of us don't have access to all the double miking, so it would be also cool to see a video on a more basic approach to getting a great drum sounds.
Those drums sound fantastic
Fantastic, you save Listeners and Subscribers YEARS of Trial and Error, Recording-wise. Much Thanks.
Great kick drum sound!
More drum recording and mixing videos would be amazing!
Geez, I love this video! I am just a beginner in the recording world, but I am a drummer .......and just this whole new world! Phew!
Love it!
Straight forward and on point.
Great video as always! Firt thing I automatically do is cleaning the toms by editing out the spaces (rests). I personally hate the boxy-boomy resonance, especially the floor tom resonating with the kick drum. Then probably gating the kick drum. So if the drum kit already sounds this great without any clean up: hats off, it will sound amazing after editing, EQ, compression and adding reverb.
Live studio drums that sound like live drums! What a concept! Love it!!!
This is so important to know!
Now that's a killer drum sound going on there!
Nice. Helps also to use quality gear for quality player. Nicely done. Mic placement and phasing awareness / polarity is good to know and apply as warranted. Good lesson. TY
Excellent thank you Sir đ
That is one beautiful Gretsch drum kit!!
thanks Rick! Love this type of content from you. My favorite modern drum sounds are on King Animal from Soundgarden. Would love to hear your take on those. Similar vive to what you have going on here.
I even love your rocking Event speakers.
Those drums sound amazing
double tom mic is an excellent tip, thank you
Excellent Recording Studio 101 science being taught here! Don't forget to mention that the same information 180-degrees out of phase cancels the signal when summed. That can happen by timing (distance from the source) or electrical flipping of the signal. Both can happen by accident! So, an engineer's ears are his most important tool. If something sounds thin or is vanishing, you may have a cancellation occurring.
Awesome video!
Hey Rick - super cool vid! Are you reversing the polarity on the top/bottom tom mics?
Rick, can you give some general guidance on EQ and compression settings for the different drums? I realize a lot of that comes down to taste but I struggle with kick drum EQ in particular. Thanks, great video here.
Is that the USA custom gretsch bell brass snare? Gorgeous! Just got the USA SOLID steel. A beast. Great vid!
Very good video!
thanks again rick!!!
I record a lot of live shows and always time align at least the vocal tracks before mixing. I align to where the signal crosses the X axis at the beginning of the wave form. Snare and cymbal leakage into the vocal mic is the bane of my existence.
This was posted some time ago. I remember this lesson from early on when I discovered Rickâs channel.
Wow this was great⊠now I need to gear up!
excelente vide, muchas. gracias
It's a good explanation when it only _mostly_ goes over my head. :)
Fantastic !
Would love to see a video for a 'budget' rig. I'm rocking a bunch of SM 57-58's, a D112 and a couple of cheap, large diaphragm condensers through a MOTU 8-pre. No outboard gear... just plugins. I record because I love it but am trying to get the best sound I can.
Thanks!!!
my favorite drum sound is on the album YES "Fragile".
whoever recorded that was an audio genius.
God DAMN I love that record!
Any tracks in particular? I'd like to give a listen.
@@dfinma heart of the sunrise is a masterpiece.
@@dfinma the whole album. check out 'Long Distance Runaround'
I guess the geniuses are Eddie Offord and Gary Martin. That record is a cornerstone
God bless you Brother!
Hi there, love your content. Just two questions, 1. what is your meter type set to ? 2. what level do you aim to record to in pro tools with said level ? thank you
Thank you!!!!