thank you, this is the opposite of those looooong videos where you get stuck watching a bunch of nonsense to get maybe 1 useful tip but you forget it because you need a nap afterward
How could I not have thought of this before? It would have saved me pain and a visit to the doctor. How can you hold small and smaller things in your hand and not clamp them in a vice? Be more careful, safety first!
13/26 OMG don't do that, please... You will destroy your cables like this. 15/26 Concept is good, but the paper clips are visibly not enough to hold. A better clamping mechanism would do the trick. A square would also make more sense rather than a ruler.
Aos quais Deus quis fazer conhecer quais são as riquezas da glória deste mistério entre os gentios, que é Cristo em vós, esperança da glória. COLOSSENSES 1:27 👏
its so funny because I worked as a fishmonger for so long and you can literally just use a knife against the natural direction of the scales and it works just as well haha
These are just common physics knowledge. Fulcrum and weakest link stuff. Anyone doing construction OUGHT to know these kinds of solutions. How to make something structurally sound, getting things measured and aligned correctly, etc. 1:24 fulcrum. If you just understand that concept, you can do so much w/o even knowing the specifics beforehand. I use it all the time in the kitchen. Opening cans that have the tab. I bend the tab up, stick a pen into the hole and two fingers below the pen, pull BACK towards myself on the pen and it opens with such little force that a 2 year old could do it. But nice vid anyway. People who haven't thought along these lines can make their lives easier. I don't bother with trying to open bags and bottles and kitchen stuff with my hands as much anymore. Easier ways. Rubber mat for opening, exacto knife for all plastic bags and cardboard boxes, etc.
Highly inspirational! Glad I watched this; will bookmark it. The glueless wedged wood joint reminds me of what old woodworkers used to say when I was a kid. They didn't like nails and it was the era before PVA glue. Their work was finer than this, but I could never quite figure out how they did it and probably still don't have the necessary fine motor control. That wedging looks easy. I think the nearest thing they did was to use dowels which may perhaps be just as easy. Ha! The tool I clicked for is the one thing in the whole video I wouldn't have a use for. :) Phone stand out of zip ties! I just... the one thing I've always needed... and commercial products are never any good... Why didn't I think of this?
OH COME ON 😢 THIS IS NOT THE FIRST TIME IT HAPPENS AND THAT'S WHY I'M UPSET! LIKE DO YOU HAVE TO POST THIS TWO DAYS AFTER I BOUGHT A CONTOUR GAUGE (THAT I WILL ONLY EVER USE ONCE!) THE CONTOUR GAUGE I HAD TO WAIT 10 DAYS FOR IT TO BE DELIVERED BECAUSE MY HARDWARE STORE DIDN'T CARRY THEM AND DIDN'T HAVE ANY IN STOCK AND DIDN'T EVEN KNOW WHAT I WAS TALKING ABOUT WHEN I ASKED FOR A CONTOUR GAUGE AND HAD TO TRY AND DESCRIBE THEM AND THEY JUST DIDN'T GET AND I DIDN'T KNOW THAT THEY WERE CALLED THE CONTOUR GAUGE IT'S WAS TRYING TO DESCRIBE THAT THINGAMAJIG WITH LITTLE THINGS IN IT THAT GET PUSHED IN AND OUT TO MIRROR THE SHAPE OF THE MOLDING I WANT TO CUT AROUND... FOR A ONE-TIME TOOL THAT TOOK 10 DAYS TO GET AND SO MUCH AGGRAVATION THE SPAGHETTI HACK WILL WORK JUST JUST FINE IT WOULD HAVE DONE THE JOB JUST PERFECTLY WELL I WOULD HAVE BEEN ABLE TO CUT THE PIECE JUST FINE AND IT JUST SO HAPPENS I HAVE LOTS OF SPAGHETTI IN THE HOUSE BUT NO NO NO NO YOU COULDN'T SHOW ME THIS HAT BEFORE I WENT THROUGH ALL THAT NIGHTMARE EH! LIKE I SAID I'M SURE YOU DO IT ON PURPOSE BECAUSE THIS IS NOT THE FIRST TIME ONE OF YOUR TIPS OR HACKS WOULD HAVE BEEN REALLY USEFUL TO ME HAD I JUST SEEN IT BEFORE I FUMBLED AND FIDDLED WITH SOMETHING THAT COULD HAVE BEEN SO MUCH BETTER HAD I SEEN YOUR VIDEO FIRST!!!
It has now occurred to me that you could round out the handle of the knife and put it directly in a drill. No need for all that extra fabrication. Just a spinning knife in a drill! How could I not think of this before? 😆😆
Like I mean or what I'm trying to say or ask is... Do you post these when you do just to have me thinking to myself oh well I could have really use that or I wish I'd known that before I had or my would have been a lot better to do it like that or... well you get the idea... And even though your videos are often causing me to smack my head saying "DOUGH! I WISH I'D KNOWN THAT BEFORE" I still really appreciate them none the less!
y nosotros SOMOS GEEKS ..... te seguimos donde vallas, somos la familia geeks mas grande de internet !!!!! Tu Nombre es Daniel Virgen y Nosotros , SOMOS GEEKS!!!!
THANK YOU FOR SHARING THAT! I really appreciate your videos, your tips and your hacks (even if I often see them only a couple of days after I could have really used them!)
Know that a PERSON i is a CORPORATE fiction created in the late 15th century for the purpose of conducting commerce No One is born a PERSON - One is born either of two kinds of Man either Man or WoMan (incorrectly written these days as woman) The two kinds of Man are collectively known as Mankind A PERSON im-PERSON-ates the living soul Man -- and uses his name Because the PERSON is a DEAD entity ( i.e. without a Soul) The name is written in ALL CAPS -- like the soul-less CORPSES in the cemetery. Undertake an extensive reading program to educate yourself to a higher level Study Law and Latin for the next 20 years and then you will be educated and much wiser. Unfortunately - I cannot teach you law in 5 minutes - not even in 5 years
Some of these techniques have been around for a long time, but I do appreciate this channel collecting them together, adding more, and publishing them. It's a really useful collection I mean to rewatch often.
This is one of those false "hack" videos, creating things, that aren't neccessary to make! Like the drill bit that got heated up, and placed into the end of a plastic handle. We already have these things called a SCREWDRIVER and a Drill!! 🤦♀️
NEW AMAZING VIDEO👉czcams.com/video/aog_lq7vkf0/video.html
So many dangerous "hacks" here, and ones that can be done far cheaper and easier by just using the proper tools!
I like how you present information in this video, very easy to understand and engaging."
The spaghetti profile gauge is hilarious. If you don't have spaghetti you could also use a profile gauge.
Last time I run out of Spaghetti I used Bucatini. It was tasty as well!
@@DiegoSynth It did not work with macaroni
@@mjverostek1278 😂
Thank-you for numbering the tips.
thank you, this is the opposite of those looooong videos where you get stuck watching a bunch of nonsense to get maybe 1 useful tip but you forget it because you need a nap afterward
Thanks also like the background sounds.. soo much better than most music choices on others 😃
5:29 The first bottlecap thing i was okay🤷🏼♂️? THIS ONE🤣Cracked me Totally up!!🤣🥰
HILARIOUS!!!
I googled "how to be shit at DIY and scrape stuff off dead fish" and this amazing video came up. 👍
Several creative, novel and useful ideas. Thanks for the video.
Thank you for the tips and beautiful nature soundtrack. All the best.
Congratulations on inventing the world's messiest fish scaler.
5:17 what you do with used beer/pop caps- a fish scaler. I like the bird sound in backround.
Yeah I need a hinge I'm going to have to stop by the Home Depot to get an arc welder and a nut and bolt
Oh this is the type of content where you mix lies with secrets.
No 21 is widely used in Indian flute (Bansuri)
Примерно за две трети этих гениальностей - мастера набьют лицо.
Береги свой хавальник!
🎃🤗🐷
Точно набьют за длинный поганый язык.
@@user-buser1970 береги свой.
How could I not have thought of this before? It would have saved me pain and a visit to the doctor.
How can you hold small and smaller things in your hand and not clamp them in a vice?
Be more careful, safety first!
i went through so many emotions while watching this
очищать чешую с рыбы лучше, поместив рыбу целиком в ведро с водой - В ЭТОМ СЛУЧАЕ ЧЕШУЯ НЕ РАЗЛЕТАЕТСЯ
I like the Uri Geller idea with the fork !😁Let's just hope the Amazing James Randi isn't looking down !
13/26 OMG don't do that, please... You will destroy your cables like this.
15/26 Concept is good, but the paper clips are visibly not enough to hold. A better clamping mechanism would do the trick. A square would also make more sense rather than a ruler.
I will use that phone standing support when traveling by train to see the passengers reaction :D
You should only use pencils instead of markers when working on wood :D But still a nice Video^^
Aos quais Deus quis fazer conhecer quais são as riquezas da glória deste mistério entre os gentios, que é Cristo em vós, esperança da glória.
COLOSSENSES 1:27 👏
We all have things that we found on our own.
This video is very good. ! 😊
Do that to one of my chisels once and you won 't do it twice!
the brush scaler was perfect the drill bit scaler was OVERKILL surprised ya didnt send chunks of fish meat flyin with it
its so funny because I worked as a fishmonger for so long and you can literally just use a knife against the natural direction of the scales and it works just as well haha
Some of these I have no idea what you are accomplishing but some are very good.
столько недешевого электрооборудования, а на чистилку рыбной чешуи денег пожалел.
неужели всё ради лайков?
Вилкой провода закручивать😮
А вы знаете, что если у вилки два крайних зуба в стороны развести то за один раз еды больше возьмёшь😂😂😂
this is great, please what is the liquid stuff poured to break the tiles?
Those birds sounds in the backround are actually coming from his head...
A good ratio of useful tips VS clickbait.
Thank you.
Is nobody gonna talk about the thumbnail?
Превосходно! Вы, несомненно, русский!
1:30 --- You're cancelled. 😏🤣
Safety first, OMG. Be careful with placing your hands and fingers so close to things that shred.
Great video both .
These are just common physics knowledge. Fulcrum and weakest link stuff. Anyone doing construction OUGHT to know these kinds of solutions. How to make something structurally sound, getting things measured and aligned correctly, etc. 1:24 fulcrum. If you just understand that concept, you can do so much w/o even knowing the specifics beforehand. I use it all the time in the kitchen. Opening cans that have the tab. I bend the tab up, stick a pen into the hole and two fingers below the pen, pull BACK towards myself on the pen and it opens with such little force that a 2 year old could do it. But nice vid anyway. People who haven't thought along these lines can make their lives easier. I don't bother with trying to open bags and bottles and kitchen stuff with my hands as much anymore. Easier ways. Rubber mat for opening, exacto knife for all plastic bags and cardboard boxes, etc.
Самый последний вариант с селиконом для замазывания углов с применением трубки,👍
*The way you make your tools is amazing. I really like the way you do it my friend* 👍👌
must be nice to have a river and a bunch of song birds in your house
Wow-Ingenios!
Especially the noodles to template.
6:50 was just waiting for his fingers to get destroyed by that spade bit...cringe!
0:14 OH my god that sound was VILE
Some great tips in this video. Liked and subscribed!
Highly inspirational! Glad I watched this; will bookmark it.
The glueless wedged wood joint reminds me of what old woodworkers used to say when I was a kid. They didn't like nails and it was the era before PVA glue. Their work was finer than this, but I could never quite figure out how they did it and probably still don't have the necessary fine motor control. That wedging looks easy. I think the nearest thing they did was to use dowels which may perhaps be just as easy.
Ha! The tool I clicked for is the one thing in the whole video I wouldn't have a use for. :)
Phone stand out of zip ties! I just... the one thing I've always needed... and commercial products are never any good... Why didn't I think of this?
Very funny clickbait
Intentional or not ...
The video thumbnail reminds me of something!!!
7:56 I see you are doing it for the first time in your life.
the video 😇
the thumb 🤨
Что за мастер такой, у которого нет циркуля? И вообще нормального инструмента?
One of the best amazing video, thanks great ideas !
You have to earmark enough time to explain your each idea or activity completely.
I came to hear the birds but tips are cool too
so not a precision engineer then 🙂
Great tips, enjoyed video.
i've done one of these before, nice tricks.... good job, ill have to try more!
Los raspadores de pescado inoficiosos, lo demás muy útil
But... how do you feed the birds, and what with?
No.13. 2:22
! DANGER !
Best kinks. Thank you.
OH COME ON 😢
THIS IS NOT THE FIRST TIME IT HAPPENS AND THAT'S WHY I'M UPSET!
LIKE DO YOU HAVE TO POST THIS TWO DAYS AFTER I BOUGHT A CONTOUR GAUGE (THAT I WILL ONLY EVER USE ONCE!)
THE CONTOUR GAUGE I HAD TO WAIT 10 DAYS FOR IT TO BE DELIVERED BECAUSE MY HARDWARE STORE DIDN'T CARRY THEM AND DIDN'T HAVE ANY IN STOCK AND DIDN'T EVEN KNOW WHAT I WAS TALKING ABOUT WHEN I ASKED FOR A CONTOUR GAUGE AND HAD TO TRY AND DESCRIBE THEM AND THEY JUST DIDN'T GET AND I DIDN'T KNOW THAT THEY WERE CALLED THE CONTOUR GAUGE IT'S WAS TRYING TO DESCRIBE THAT THINGAMAJIG WITH LITTLE THINGS IN IT THAT GET PUSHED IN AND OUT TO MIRROR THE SHAPE OF THE MOLDING I WANT TO CUT AROUND...
FOR A ONE-TIME TOOL THAT TOOK 10 DAYS TO GET AND SO MUCH AGGRAVATION THE SPAGHETTI HACK WILL WORK JUST JUST FINE IT WOULD HAVE DONE THE JOB JUST PERFECTLY WELL I WOULD HAVE BEEN ABLE TO CUT THE PIECE JUST FINE AND IT JUST SO HAPPENS I HAVE LOTS OF SPAGHETTI IN THE HOUSE BUT NO NO NO NO YOU COULDN'T SHOW ME THIS HAT BEFORE I WENT THROUGH ALL THAT NIGHTMARE EH!
LIKE I SAID I'M SURE YOU DO IT ON PURPOSE BECAUSE THIS IS NOT THE FIRST TIME ONE OF YOUR TIPS OR HACKS WOULD HAVE BEEN REALLY USEFUL TO ME HAD I JUST SEEN IT BEFORE I FUMBLED AND FIDDLED WITH SOMETHING THAT COULD HAVE BEEN SO MUCH BETTER HAD I SEEN YOUR VIDEO FIRST!!!
Good stuff. Thanks
vc é top demais parabéns 👍 felicidades salvador Bahia Brasil
Spart nicht nur Geld,sondern auch Gehirn.
Top tip: A knife takes scales off a fish
But what if you do not have a knife, but only beer and a drill ? Go hungry ?
It has now occurred to me that you could round out the handle of the knife and put it directly in a drill. No need for all that extra fabrication. Just a spinning knife in a drill! How could I not think of this before? 😆😆
Wow!! Awesome hacks!!! Thanks for sharing!!👏
Minute 2:59. Überprüfe mal deinen Winkel an einem Möbelstück, denn dieser Winkel hat keine 90° der ist Billigramsch.
The poor fish is bleeding, 🤣🤣🤣
A fish scraper.....
Like I mean or what I'm trying to say or ask is...
Do you post these when you do just to have me thinking to myself oh well I could have really use that or I wish I'd known that before I had or my would have been a lot better to do it like that or... well you get the idea...
And even though your videos are often causing me to smack my head saying "DOUGH! I WISH I'D KNOWN THAT BEFORE"
I still really appreciate them none the less!
You know it's going to be special when it's preceded with a finger wag. 🤨
y nosotros SOMOS GEEKS ..... te seguimos donde vallas, somos la familia geeks mas grande de internet !!!!!
Tu Nombre es Daniel Virgen y Nosotros , SOMOS GEEKS!!!!
Interesting video!
Wieder nur eine Ansammlung uralter Binsenweisheiten.
BRAIN ROT! I WANT MY TIME BACK!
This video is a peice of art🎉.
My pre-watch prediction: It's a steampunk wiener.
Demonetized. Lewd thumbnail image. Inappropriate. 😂
5:42 Did that fish just blink? You couldn't aim that any better if you tried.
日本人からするととても雑な仕事に見えてしまう。仕上げが汚いし出来上がったもので怪我をしそうだ。
Благодарю ❤
THANK YOU FOR SHARING THAT!
I really appreciate your videos, your tips and your hacks (even if I often see them only a couple of days after I could have really used them!)
some of them are unsafe
I intensely dislike videos without verbal commentary.
Really good tips...some of the best compared with other channels of this nature. Good job!
Samodelki - polnaya huinya! 250 Half-of-lahs from 250!
If you know what i mean.
looks like a waste of time from the start.
desperdicié 5 minutos de mi vida... luego vine a comentar... y ahora a cerrarlo
Can a person be so creative and thoughtful? Really unique
Know that a PERSON i is a CORPORATE fiction
created in the late 15th century for the purpose of conducting commerce
No One is born a PERSON -
One is born either of two kinds of Man
either Man or WoMan (incorrectly written these days as woman)
The two kinds of Man are collectively known as Mankind
A PERSON im-PERSON-ates the living soul Man -- and uses his name
Because the PERSON is a DEAD entity ( i.e. without a Soul)
The name is written in ALL CAPS --
like the soul-less CORPSES in the cemetery.
Undertake an extensive reading program to educate yourself to a higher level
Study Law and Latin for the next 20 years and then you will be educated
and much wiser.
Unfortunately - I cannot teach you law in 5 minutes - not even in 5 years
Some of these techniques have been around for a long time, but I do appreciate this channel collecting them together, adding more, and publishing them. It's a really useful collection I mean to rewatch often.
@@andrew_koala2974 Jesus Christ, lay off the Eucalyptus, bro.
Alot of these just seem weird and unnecessary.
Всё хлам. Если не хлам, то постанова).
Good advice for life
Heu....Comment n'y ai-je pas pensé avant ? (ça serait de bon aloi en terme de qualité orthographique)
*N'est-il point ? :)
Muy práctico y fácil de hacer!
This is one of those false "hack" videos, creating things, that aren't neccessary to make!
Like the drill bit that got heated up, and placed into the end of a plastic handle. We already have these things called a SCREWDRIVER and a Drill!! 🤦♀️
De las 26 solo una idea sirve.
Awesome!!!
mostly useless and garbage tricks, but it is fun to watch.