On the red b2200 what is the center bore size and the bolt pattern on your rims. I heard mazda rims fit my isuzu pup. My bolt pattern is 6× 139.7 center bore 108mm. Ive got some 8" wide 15" centerline aluminum deep dish racing rims on it now. With 215/65r15 tires. Really fills the fenders up. They do stick out a little. Point is im looking for new rims but nothing i find has that 108mm center bore. Dont know where to look? Thanks another great video love both the trucks!
Look at toyota tacoma wheels or wheels that fit that truck. Most mini trucks (nissan, mazda, isuzu and mitsubishi) are 6x139.7 with the exception of the Toyota pickup. Center bore on mine I think it's around 97mm or somewhere there but the tacoma uses the higher bore. Stay away from chevy center bore as that one is smaller and same with dodge.
@@FlakeGarage thanks for the information. Only thing I can find other than the ones I have are crazy expensive with the 108mm center bore but ill definitely keep lookin. Thanks again
Hey nice trucks man! I got a 91 2600. I wanna trick it out a little. It's got a 3" drop in the rear and torsion drop up front. You think I can fit 18s or 20" wheels without rubbing?
18s you might be able to fit with the right size and offset + tire. For 20s I don't think you'll be able to fit those without rubbing specially in the front
I haven't messed with any older B series trucks so I don't know how their suspension is setup. If you have coils, you might have to try to find a set of lowering coils
@@FlakeGarage I'm considering setting blocks under the frame in front that are 2 inches lower and heating the coils with a torch. When the truck lowers to the blocks take the torch away. Have ya ever done it?
I believe the 4x4 is taller than a 2wd so for sure it would be easier to lift possibly. I think the issue nowadays is finding those parts to lift it with
@@FlakeGarage I'm in the process of getting a 1990 b2000 I think it is so it's gonna be an exciting build for me... My second by the way... Here in 🇿🇦🇿🇦we have a good availability of spare parts but pricy.... I wanna go with the low rider look.... Wish me luck 👌👌👌👌like to update you guys accordingly
Only aftermarket parts on it right now are the body lift which unfortunately I don't know name/brand, wheels and the tailgate bolts. Everything else is factory
Greetings from P.R.🇵🇷. I have a Mazda B2200 87 5 speed standard blue clear with sticker fabric letter and lines. You have nice trucks. Beauty.👍
Saludos a Puerto Rico! Thank you!
You're hurting my heart I'm dying for those trucks 😩😩
PROS AND CONS OF NISSAN D21? I really want to buy one but don't know what to expect.
We’ll work on getting a few pros and cons together for a video
Where did u get your lift n rims from on the white madza
On the red b2200 what is the center bore size and the bolt pattern on your rims. I heard mazda rims fit my isuzu pup. My bolt pattern is 6× 139.7 center bore 108mm.
Ive got some 8" wide 15" centerline aluminum deep dish racing rims on it now. With 215/65r15 tires. Really fills the fenders up. They do stick out a little. Point is im looking for new rims but nothing i find has that 108mm center bore. Dont know where to look? Thanks another great video love both the trucks!
Look at toyota tacoma wheels or wheels that fit that truck. Most mini trucks (nissan, mazda, isuzu and mitsubishi) are 6x139.7 with the exception of the Toyota pickup. Center bore on mine I think it's around 97mm or somewhere there but the tacoma uses the higher bore. Stay away from chevy center bore as that one is smaller and same with dodge.
@@FlakeGarage thanks for the information. Only thing I can find other than the ones I have are crazy expensive with the 108mm center bore but ill definitely keep lookin. Thanks again
Where to find the chrome grill like you got on the 😮red truck
Ola cómo estás.. como puedo bajar mi mazda 3 pulgadas
I need a Mazda like those,do u have a link for ordering.
on the red Mazda what size tires are you running I have the same truck but it is an 86
205/40/16
Hey, is the truck really slow at stock? Can you tell me firsthand? It looks like these trucks are super weak in terms of HP as stock.
Bro these trucks have 85hp stock lol of course they are slow
@@FlakeGarage fuckkk you’re right that sucks. Thank you for your input
Only way to get power out of them is to swap something better in lol stock is just low and slow type of cruise
@@FlakeGarage Yeah I figured man, a 1JZ swap sounds nice haha
Hey nice trucks man! I got a 91 2600. I wanna trick it out a little. It's got a 3" drop in the rear and torsion drop up front. You think I can fit 18s or 20" wheels without rubbing?
18s you might be able to fit with the right size and offset + tire. For 20s I don't think you'll be able to fit those without rubbing specially in the front
@@FlakeGarage rite on bro thank you! I'll keep an eye out for 18s instead
How did you drop 5"inches without scraping the floor with the back suspension u-bolts??
Lowering leaf and block, once it’s all set up, you trim the bolts down as much as possible
@@FlakeGarage me puedes decir cómo bajar mi Mazda 3 pulgadas
Hey Brian, would you know of any tricks to lowering the front of a 1984 B2000? Got no torsion bars. Coils
I haven't messed with any older B series trucks so I don't know how their suspension is setup. If you have coils, you might have to try to find a set of lowering coils
Check out the guys at djm suspension. They might have something for your truck
@@FlakeGarage I'm considering setting blocks under the frame in front that are 2 inches lower and heating the coils with a torch. When the truck lowers to the blocks take the torch away. Have ya ever done it?
I'm sure the 4x4 or AWD /4WD
set up will help with an easier body lift... but no doubt you will have fitment issues too
I believe the 4x4 is taller than a 2wd so for sure it would be easier to lift possibly. I think the issue nowadays is finding those parts to lift it with
@@FlakeGarage I'm in the process of getting a 1990 b2000 I think it is so it's gonna be an exciting build for me... My second by the way... Here in 🇿🇦🇿🇦we have a good availability of spare parts but pricy.... I wanna go with the low rider look.... Wish me luck 👌👌👌👌like to update you guys accordingly
@@JustinPaul1st Lowering should be fairly easy! We'll be lowering the white mazda as well here in the channel and we'll post the updates. Good luck!
What wheel size is on the slammed Mazda
16x8 with 0 offset
What tire size
Could you post/send me a parts list for the b2200? I have an extended cab se-5
Only aftermarket parts on it right now are the body lift which unfortunately I don't know name/brand, wheels and the tailgate bolts. Everything else is factory
Osm
265.....smh way too much
👉🔥🔥🔥👍👍👍👍👍👍👍👊👊✌✌
Thanks bro!
🤓🤓