Furitek FX118 UPGRADES - The Best RTR Gets Even Better!
Vložit
- čas přidán 28. 10. 2023
- In this video I revisit the Furitek FX118 Furywagon RTR and add some new upgrades. We add stainless high clearance links, stainless steering linkage, and some brass portal covers. These mods are available from Furitek at the links below!
High clearance links: furitek.com/products/2908-01?...
Steering linkage: furitek.com/products/0906-03?...
Bearing kit: furitek.com/products/furitek-...
Portal covers: furitek.com/products/furitek-...
Cape Crawlers Merch: capecrawlers-shop.fourthwall....
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $100 of accessories: www.fmshobby.com/capecrawlers - discount code Capecrawlers
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracingparts.com/ - code CAPE10
10% off any Flubberstufferz products: flubberstufferz.myshopify.com/ - code Flub10CC
10% off any Cow RC products: cowrc.com/ - code CAPECRAWLERS
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
Baseline tests and course runs: 0:34
The upgrades: 5:01
First look after installation: 8:31
Upgraded performance tests: 10:06
Upgraded indoor course runs: 11:43
Bonus crawling footage: 15:45
Final thoughts: 18:08 - Auta a dopravní prostředky
Timestamps
Baseline tests and course runs: 0:34
The upgrades: 5:01
First look after installation: 8:31
Upgraded performance tests: 10:06
Upgraded indoor course runs: 11:43
Bonus crawling footage: 15:45
Final thoughts: 18:08
Aaah ! Some news about the FX118. Thank you !😊
On mine : brass rings inside front wheels only + Brass axle end covers on both axles + battery 90° rotated, now parallel to the chassis (same place) + rear & front shocks now about 45° tilted + 1.3" tires from RCAWD (not the best but better than the originals, and they look sooo good) + swapped this ugly body for a Power Wagon from a FMS FCX24. No rear bed, so same body weight.
Total weight : 605 grams and a pleasure to crawl with.😉
Wrap some lead golf tape around the beadlock ring to add what ever weight you want , people mone about adding rotational weight but it's a brushless system and it has the power to turn a little lead weight in the wheels , I have stopped buying the brass parts now and the last few builds I have only used the lead golf tape to get what ever weight I wanted , it works try it , I won't go back to paying for brass parts that do very little to improve your truck , weight on the wheels will , stay safe mate 🇬🇧
Sweet I just ran mine 4 the 1st time now it's upgrade time..grate info
I did the bearings and full links add to mine the other day, it sure is a Great little crawler !! Really enjoy your videos !!
Oh, yeah the rear upper links on mine needed to moved up a hole as they were binding when the suspension flexed. The fronts were fine.
Great video Adam can't wait to buy a furitek soon
I’m glad I was able to find your channel I haven’t really had anything to keep me entertained I normally work 12 hour shifts and I never have time to myself anymore i bought an scx24 but can’t really get the upgrades been busy fixing my truck after my accident, keep up the good work and amazing vidz always appreciated the support and help with these little rigs
Thanks for watching!
Wareham, Mass. That's my hometown! Love that place. I lived in Parkwood Beach. I miss it there. Cool rig, great video.
Yeah it did pretty good out there, I do like that rig. Right now my number one priority is my 1/10 scale rat rod and building it’s turning out pretty sweet
I just installed the bearings in mine. Waiting for everything else to be shipped. I also got the drive shafts and the delrin side plates so I can lower and reconfigure the electronics more forward.
Rcawd have have aluminum / brass axles that work . Also furitek rampart skid fits so that way you can run the Stella transmission with a komodo or whatever motor you want that that's how mine set up and it's a beast you do have to run scx 24 axles though. Also makes it super quiet. And for the price of the brass portal covers you you get those with the axles so it's actually not even that much more to get a full built axle set
At that point why not just buy a cayman, or doing a ground up scx24?
@@JUSTHAVEFUNRC because 1/2 of rc is tinkering/working on them!!
Also already have a custom scx24
Awesome Video as always one of my favorites to watch. Love my Fx118. $50 bucks into mine and id compete with it
Wreckless is awsome. Love that place. Haven't been there is a while.
Appreciate seeing the upgrade video!
Looks like the new links clocked the front axle a little bit-rotated it backward some? Would be better for climbing!
It does look a bit more composed. If you really want to get picky you could put the plastic upper links back on to very slightly lower the COG. Might be worth trying the rear brass for stability reasons even tho it would shift the balance back to see what happens.
Fantastic video as always Adam 👍✌
also could you do a build overview of og new livery snaggletooth
and how are you doing with your new job.
I’m going to revisit Snaggle soon and the OG blue gladiator. The job is great. Very busy, but in a good way!
What suspension links would you recommend to get more articulation? Great Channel! From Mark
I mentioned in a comment on another video that I am looking at upgrading the tires on my new FX118 (awesome advice to get this truck, btw) and you recommended 63mm tires instead of the 70's. It loosk like you went with the OGRC 1.0 RC Tires Competition Pin, 63 x21.
I'm also intrigued by a couple of other tires:
Little Guy Racing Trail King M/T 1.0 Inch, 63x24R1, and the
INJORA S5 Swamp Stomper Crawler 1.0 Tires, 63x24, T1018
Of these 3, would you go with the pins again or one of the other two? The Trail Kings are twice as expensive, literally, as either the pins or Swamp Stompers.
Dom
I always weigh each one individually because each one will weigh slightly different, Then you can adjust driver side or passenger side and how much weights on each side you could fine-tune it Yep I’m here watching Sunday 4:22 PM
Can u please share what mounting holes that you used on the links mine tend to bind no matter where I try
Ive done the same upgrades to mine as well, not much changed. Need to get more aftermarket parts available like axles, c hubs, diff covers to get more front bias. I noticed yours seems jumpy in reverse, mine is as well and havent figured out a way to tame it but still keep good power in reverse. Ive messed with throttle curve to no avail. Any input anybody?
Great review on upgrades,I don't think it needed the links.did you notice that the wire from the motor to the esc was run to close to the drive shaft. Out of box.
Thank you for a great video, could you please share the rim & tire upgrade?
Thanks for watching! Wheels are LGRP beadlocks and tires are ogrc comp pins
@@CapeCrawlers thank you,very impressed that actually reply!.! Well done!!!
Awesome video! What kind of tires are those? Looks great!
Thanks! They are OG RC comp pins
Hello mate, you think FMS upgrade fit on this little guys ? Thanks !
try the new meus axels with the double jointed universal joints
Have you seen Gamyrc's video on this Rig? He's one of the designers for the Fury Wagon.
I haven’t! I’ll have to check it out
Can you do an upgrade video on the fx118 katana please!!
I can work on that. I’m enjoying the katana a lot
I received the skid and links this past Saturday haven’t had time to put em on yet but I did notice the links look really short I’m assuming the uppers attach further up on the chassis honestly I have no idea yet how the bottom links work cause they seem short as well. was hoping to get an idea of that from this vid any pointers would be appreciated I’m gonna put em on this weekend.
They’re super short! But they do work
To me it sounds better after the bearings. Or am I tripping?
Is that wagon designed to be a crawler? The Furi stuff seems to sit high out of the box. I have the cayman and I feel the same about it, high profile.
Yes and you’re right, it’s tall but still pretty planted
do you think the 70mm injora swamp claw tires could fit on a injora scx24 nylon buggy? I think i gonna use mofo nylon portals. what links do you think i will need to make it work.I hope your new job is going well.
Got them on my warthog build just did it watching this haha
If you added some hex extensions I think they would fit. I would go with deadbolt rears and c10 fronts. My favorite combo!
I think the biggest gain you got is from the bearings. Links and portal covers eeeh not so much just a minimal gain.
Are there any crawler courses in the Dartmouth area?
I’m not sure about actual courses but you’re not far from Fort Phoenix in fairhaven. That place is epic!
Can we see competition videos
What size tires are on that fury
64mm
@@CapeCrawlers thanks for the reply. me and my son love your videos
And just go with the rc4wd axles made mine 100 percent better
Nice American flag 👍
Well i have one and after 2 days it would not move forward installed the app updated the firmware and can get forward but no reverse unless i change it in the app and now not quite a week in it won't charge very dissapointed in this truck. I will say the first 2 days it was Awesome but now i would not recommend this truck
Also the rcawd axles the portal axle covers are brass way better deal than these upgrades