Citroën DS3 Risk of filter clogging, DPF aditive pounch top up & how to clean the DPF.
Vložit
- čas přidán 7. 09. 2024
- in this video I'm topping up the DPF aditive bag and cleaning the DPF FILTER on a Citroen DS3.
The car was displaying a message on the dashboard saying: Risk of filter clogging.
Fault code: p1490 particulate filter detected to be overloaded.
SOLUTIONS:
-Do a regeneration
or
clean the DPF filter
Make sure there is enough DPF aditive in the bag!
thanks for watching
Rick, this is one if not THE best how to Video on acar I have seen. Thankyou so much for your clear no Bullshit approach!
Great video man. Tiny tip, when pouring from a full bottle like the cleaner bottle you have, do it upside down and you won't get the 'glug glug glug'; just a nice straight pour with no wasted.
Brilliant best I’ve seen l had a big bill for my c3 they put a new filter in and reconditioned the injectors with only 19,000 miles on the clock it looks like it only needed a clean I’m going to do it my self before the mot thanks man that was great 👍
Very helpfull you are the Best thanks
Brilliant video, thanks for the effort, you've saved me money already, top Stuff!
Great video well worth watching.
thanks for the vid, super helpful!
Great stuff Rick. Where you live? You can service my cars.
Have exactly the same car and the same issue, but can't get the bloody sensor and the 12mm bolt off! Any tips or advice?
Hi, I just watched your video and wanted to ask you soming real quick. I'm about to pay 500 quid on Monday for a DPF removal, cut in half, cleaned and remap as it has been regenerated and the same warning still comes up. However I've runned 2 diagnostic with 2 different garages and the fault code is the same P0420, Particle filter overloaded. Checked with a DPF specialist and they said is the catalytic converter or oxygen sensor, what should I do man? Hope you see this before Monday bro, Thank you in advance
excellent video, I have citreon c3 2011 1.4 hdi , I've just had additive level too low message show up on the screen, so I'm going fill the pouch up, but not sure how much I need to fill it up by?
Hi, I’ve just had the same message, did you do this and did it solve the problem?
@@Ross-cn4zf hey, yeah I resolved by replacing the pouch and getting the code reest.
hey, another question is this Fluid fine I read its universal in the euro car part description.
the original is the green type like this but says eolys powerflex. I had ebay seller tell me I need to buy the pouch, but the pouch is and fitting for c3 mk 2 are exactly the same as a ds3.
Ive had this for the last 6 months and ive been using redex in the tank when i fill up . Could i just remove the bag of additive and if so would it stop the display message in my cabin . ??
Hey, just come across this video. I have the same car and have the “risk of particle filter clogging” I have a question. I have already replaced the bag with the fluid, the levels are fine and I’ve told the Ecu, so can I clean the dpf and then just tell the Ecu that it’s been replaced without having to tell it about the fluid and without filling up the fluid again?
Hi, yes you can do that.
Cheers
@@Rick_Motorsport thank you
I need to do the same job on my DS3 E-HDI, do you have time and how much does it cost?
Is there a way to do regen manually without computer?
Question my additive low warning is on along with service light I can get the additive to refill but computer reset is an issue for me so how long can I drive the car for before issues
I've heard on forums its around 1000 miles before engine goes into limp mode
Hi
My Peugeot expert says
Part add level low
How u charge to topup
Quantos kilometros tinha o carro na altura e quantos tem agora?
Is it worth to clean dpf or better to replace it with a new one? How long can you drive after cleaning until risk of clogging appears again?
If its fully clean it's the same as brand new
I've got the citreon c3 Picasso 1.6 hdi, is that the adblue tank your filling?
No, it's the DPF additive tank!
What program you use for cleaning the error?
Hi,
I have P1445 error on my Citroen. Additive liquid refilled. I also have Autel tool. Should I do that programming of additive level procedure to reset this error?
Program the quantity of the additive in the tank and try to do a regeneration.
Hi mate
Did you solve your problem ? How did you do ? Cheers
@@juliom6260 In my case I went to Citroen dealership. They programmed whatever was required and that was for FREE! Did not expect that from main dealer....
Hi, Rick bought autel mk808 and it’s telling me that the dpf additive pump fault on the c3 1.4 hid do you if this is a common fault cheers
Hi, Rick there’s a fault with additive pump do yo know if this is a common problem on theses cars Citroen c3 please and any idea where I can pick one up cheers
Hey bud ive got a 06 ford cmax tdci and couple days ago i had a message come up on the dash so i plugged scanner in and got the code P2585 Fuel Additive Control Module Warning Lamp Request so i think mine needs filling up to but over the last couple days the code clears it's self and the message on the dash disappears,Do u think it could be something else or definitely needs the pat fluid topped up.Cheers
Did you fix it ?
@@keb9967 Nope.Topped up dpf fluid then primed it using forscan then cleared the codes and the codes just come bk soon as the engine is started
hi I have a DS3 1.6 hdi 110.
today I use my autel tool and it tells me ash level in filter is 98%, I have force regen and although much white smoke come out from exhaust after regeneration still says ash level in filter 98% and total weight of soot is 1.009 g/l.
is this saying I have almost blocked dpf?
I have no management light. but I believe car feel sluggish and rough idle. atm 105k miles not km
I would remove and clean the dpf including the sensor and the reset it.
@@Rick_Motorsport do you mean choose replace dpf on the tool? Also I can see the dpf pressure sensor has been replaced before
Hi, Rick my son has a c3 2011 1.4 hdi do you kown if it has a dpf refill bag on this type of car please
Hi,
I'm not 100% sure to be honest, but if it has, it will be on the same location as the car on the video.
@@Rick_Motorsport cheers Rick i will have a look at the weekend, keep up the good video's
@@Rick_Motorsport Hi, Rick found it, it was where you said it would be, many thanks just got to get pat fluid ordered now
@@billythackray89 👍
@@Rick_Motorsport Hi, Rick my son's c3 1.4 hdi is throwing up a error code P2562 done a boost control valve , and new turbo with new actuator come's back after about 10 mins running [engine light] comes back on any ideas please
Hey , was the reset done with an mp808 ?
Hey, yes that's correct.
Não sei porquê mas o dono do carro é Português certo? :)
Lol, como sabe?!
hi @rick_motorsport i have a 1.6 hdi peugeot partner with risk of filter clogging error then sometimes limp mode. error code p242f and p1490
Sounds like your DPF is partly blocked, and needs just the DPF removed and cleaned, and then clear the fault codes, and also program the ecu telling it the cars had another DPF fitted.