That was it the putty knife. I've watched many videos and my screen door would not come off. Yours is the 1st to help me take off my sliding screen door.
Hi Chris, I have tried using a putty knife, and backed out the tension screws, and still unable to remove the screen door. It almost seems like I need to remove the track, or take apart the whole frame of the screen. What am I missing?
I’d probably suggest damaging that one to get it out and then build a new one that is the right size. Doors unfortunately can shrink because it’s vinyl but aluminum doesn’t so the small tolerances of the door trap it in. If your in Minnesota we could also recreen it in place.
I have been struggling for over a month now trying to get my screen door off to replace the screen. I just cannot get it to the point where I can get the wheels underneath to lift. I'm using a butter knife I've tried it putty knife and nothing will lift them so that I can lift it up and have it come off it's so frustrating
If only you had not done this video when someone was vacuuming or making some other noise that distracted from your demonstration. Did you not hear it?
That was it the putty knife. I've watched many videos and my screen door would not come off. Yours is the 1st to help me take off my sliding screen door.
Simple....and to the point, thanks for showing the additional adjustments at the top!
Thanks for your comment glad we could help!
First video I found that explained how to get the screen off the track if there are no tension screws for the rollers!
Glad we could help. Have a wonderful Summer!
Thank you! I didn't know those were tension screws. I am not a handy person but I followed your instructions and got it out easily.
And, Voila!! Thank you for helping us get our screen fixed.
You are so welcome!
Perfect. Thanks so much. Mystery solved on how it was installed.
Glad we could help!!
Simple instructions and right to the point, great video thanks
Thanks for the video. Easy off. Easy on. I’ll give that a try.
Thank you! Glad we could help!
This was very good. Simple...and to the point.
Hi Chris, I have tried using a putty knife, and backed out the tension screws, and still unable to remove the screen door. It almost seems like I need to remove the track, or take apart the whole frame of the screen. What am I missing?
Did you adjust the top roller? Sometimes those are too tight so loose in the screws on those ones are the top.
@@ScreenMedic Hi Chris, thanks for the quick response. Yes, I have adjusted both the top and bottom rollers. Any other ideas?
I’d probably suggest damaging that one to get it out and then build a new one that is the right size. Doors unfortunately can shrink because it’s vinyl but aluminum doesn’t so the small tolerances of the door trap it in. If your in Minnesota we could also recreen it in place.
@@ScreenMedic thanks again for the quick response. Unfortunately, I'm down in Florida, unless you want to come and visit! Lol
That would be a hefty trip charge :) best of luck.
Thank you so much. Very simple and easy to follow.
Nice job!! Thanks!!
Which way to turn the screw s?????????
Thank you!
good stuff! thanks much
Thanks man. You helped me out
My pleasure!!
Mahalo for this video. I could finally remove my screen door🤙
Thank you very much.
My pleasure!
Best explained video
Thanks for the comment; so glad we could help
Nice. Quick and simple!
Where did u get that HALF umbrella???? We need that. Thank you!
This was at a customers home so I’m not sure where they got it unfortunately
@@ScreenMedic ah. Thank you for responding. I just took off our screen door. Thank you!!!
THANK YOU
ThNk u 🎉
I have been struggling for over a month now trying to get my screen door off to replace the screen. I just cannot get it to the point where I can get the wheels underneath to lift. I'm using a butter knife I've tried it putty knife and nothing will lift them so that I can lift it up and have it come off it's so frustrating
Loosen all the adjuster screws so there is no tension on the wheels. This might be your issue?
Thank you soooooo much! ❤️❤️❤️
Very helpful
Glad we were able to help.
Thanks worked great
Good to hear
Thank you very much!
You da man!
Thank you!!
Thanks so much
Our Pleasure Donna!
PERFECT VIDEO!
Good
Like it bro
Thank you very much sir
Glad we could help!
what direction do you adjust the screws ?
Clockwise makes the wheels go out more. Counterclockwise will retract the wheels
Anyone tell you you look like Ron Howard when he was your age?
Actually, I have one other time and I looked up some images and do see the resemblance. Have a great day!
I was ready to give up -- then I watched your video. No one else gave the putty knife tip.
Good video. Now get off my deck!😁
Thank u
This only works if the track is not blocked by the extrusion on the front
U can't see the wheels on mine
Then if all else fails you can take a hammer and bash the living shit out of it till it pops right out. Works like a charm! 👍
That was about 1:45 too long
If only you had not done this video when someone was vacuuming or making some other noise that distracted from your demonstration. Did you not hear it?
Thank you!