Pt6 | CRANKSHAFT | LAMBRETTA TS1 ENGINE BUILD - on the cheap
Vložit
- čas přidán 10. 09. 2024
- Part 6 of the 'cheap TS1' engine build. This is all about the crankshaft and how to fit it. Listed below are the tools I use from the suppliers I like. As always leave some comments and we will answer as many as possible.
Cheers
Crank Puller: www.lambrettas...
Conrod Tool: www.lambrettas...
Mag/End Plate Tool: www.lambrettas...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
MERCH:
www.etsy.com/u...
=================================================================================
Welcome to our channel, we are Russ & Dom and we love scooters. Both of us have been into the scootering scene since the 80's.
This channel is a about Scooters and related stuff....
As well as making entertaining videos (we hope) We would also like to help YOU out too, with videos such as:
- Rebuild Projects
- Trick tips and How to's
- Scooter Rallies
- Scooter Sprinting
- In-depth entertaining features
- Making stuff yourself
- Funny videos
We also try to reply to everyone so leave some comments too!
Cheers Russ & Dom
=================================================================================
You can find our socials here:
/ shedtune
/ shedtune
/ shedtune
Our Skateboard Mates: wearess20.com
This is the part I've not completed myself. I've stripped them but haven't installed one yet, so thanks for uploading. Thanks for reminding me to pick up a vice for my cranks! 😆😆🤣
😂😂😂😂
Do the crank bearing race in the kitchen. Stick the crank in the freezer and the race in the oven. Use oven gloves instead of pliers and just drop the race straight on…
Your welcome!
Cheers 🍺👍😂
Very good DD KEEP UM COMING!
I’ll do my best 👍
Smashed a crank in 81. Didn’t use a feeler gauge to set the replacement. Did I get lucky it didn’t seize 😂😂
Maybe, they don’t normally seize, but they tend to rub and not spin freely
We are the……Great series really enjoying this Russ. I think you need to get Scootering print an apology to Dom…Gettin real lonely in there….😂🤣💀
When u doing some photos for us then
@@Shedtune_Russ whens good? I might not have a camera soon! 😂
@@4th_Lensman_of_the_apocalypse I’ll send u some dates on WhatsApp
@@Shedtune_Russ nice one Russ!
Diesel Dave 🤣
😂😂😂😂😂
😂😂
Great video Russ clear explanation,I missed what size feeler gauge you used for correct fitting
Yes you did cos I forgot to put it in the video! Doh! 😂😂😂 I’ll put it up on here when I get home
I like to work to 0.5mm each side as a min up to 1mm
You forgot to mention the special tool 😂
I am the special tool 👍😂
Excellent vid as always, did you use the diesel from the other day to clean things up 😅😅😅
😂😂
FFS don't put the crank in the vice 😂😂😂
Dont u start lol 😂
Your taller than you look in person than on video😀
I know, that’s cos I use trick photography 😂😂👍
What was the crank to case tolerance, that you measured with the feeler gauge.
lol I’ll have to look it up cos I forgot to put it in the video lol 😂
I like to work to 0.5mm each side as a min up to 1mm
well done .... why are you wispering ?
Cos I know your hard of hearing 😂😂😂😂👍
@@Shedtune_Russ I never listen thats my problem 😂😂🤣🤣😂😂
@@TheSteelweasel WHAT! Lol 😂
I’m not a fan of the Shedtune logo constantly flashing up on the screen boys.
Did u watch till the end?
Errrr, no. What did I miss?
@@peterwelch5333 the BIG announcement at the end!