SONY 65" LED TV Not Working - How To Fix No Backlight Issue - XBR-65X900E
Vložit
- čas přidán 20. 03. 2022
- SONY 65" LED TV LED Strips Replacement Tutorial
CLICK HERE for replacement LED strips: www.shopjimmy.com/sony-xbr-65...
Part Number:
XBR-65X900E-STRIPS-VER2
Warranty:
180-Day Warranty
Part Type:
LED Light Strip
Part Usage:
LED/LCD
Panel Number:
A2187582A|YD7S650DND01B
Known Models:
XBR-65X900E - Jak na to + styl
I just wanted to say thank you! I was able to fix my TV with no previous experience, thanks to your video. It took about 6 hours and now the TV works again and looks fantastic!!
Thank you again for posting this video!
As a former technician, my take on this is: Before going through all this work, you need to verify that the power supply is not at fault. Checking the power supply's output voltages with the system under power, and using a Digital Volt meter is how to do it. Also, checking for any excessive AC ripple on the DC outputs is a good idea. If the power supply is bad, it could mean many things: Bad solder joints, bad capacitors, possibly an overload external to the supply, causing it to shut down. A question I have is, are these LED strips serial, or parallel, or both? Are there any fuses associated with the LED strips? My experience with LED strips is that they are very delicate, and it is easy to create an open circuit unless they care handled with care.
Smart fix. Learned a lot. Thank you, Jimmy. Cheers 😊
Apparently there are two LED versions for this Tv. Is there any way to find out if Ver 1 or Ver 2 of the LED Strip without tearing the whole tv a part?
Good job bro
Do you have a tutorial for a Sony XBR-65X900A?. Looking on your website, it appears that this model only uses 4 strips and may run vertical instead of horizontal. Thank you.
Did u find anything having the same issue with my 65-900a
@@Dreyday0 No. I just got rid of the TV.
Question if you can assist, had my 2018 Sony 900f have the flashing red light was told backlight issue guy that fixed it first time left visible tape on bottom of the screen (showed a black outline) now now one area seems darker. Possible he used aftermarket led strips? Told me was using Sony parts could that be the cause? Thanks
Does it work
What did he replace
@@giovannisanchez1071 the backlight strips....finally all good says one of the filters moved...now after all this ai have a dead pixel! Lol never ends thanks
Sorry to sound dumb but is that a special blue tape. Just starting out doing this so don't want to make stupid errors
Are you able to test the LEDs before re-assembling the entire thing?
Yes
Pls where can I get someone to repair my Sony 65W850C it blink red 6times am in Ghana pls help me
Los 6 parpadeos indica que el backligth está malo tienes que desmontar la pantalla y cambiar la tira led
Good yar
Which country boss
💯
Why replace all LED strips?
Parts are cheap, the work is in taking it apart. Renew the whole set to make sure the colors and brightness are consistent and it will be good for at least another 5 years
Wow, what a pain this looks like!
that reflector looks crap. don't know he cut out the center. also use hot air to take off the led strips and use gloves with the refactor and filters.
tbh that looks like it'll have shadows and finger prints all over the screen
Oops now something else doesn't work, take it apart again, rinse and repeat until you get so frustrated you smash it in a fit of rage. Thanks but, I'm just gonna buy a new TV.