I got the 800, decided I'm fixing my own. Just need to be sure boot is supposed to be removable from coil cause that's the only way in getting the new one back in lol
Good Video! Gotta say Suzuki sure makes it a job to check or change a spark plug on a cruiser! My wife rides an S40 and i have to take the seat and tank off to get to the plug. On my victory the plugs and wires can be changed in a 1/2 hour. Not knocking Suzuki though, fantastic motorcycles for sure.
Knock the hell out of Suzuki, I just got a C90 and hate the way the whole bike is designed, it is not new, I would not get a new Japanese bike, they are not designed as they should be and almost as bad as Harley's. Yeah, to get to the plugs you have to pull the so called tank sides off the first time, next time do not, just lift the plug side up some.
If you ever do cross thread or strip the threads putting the plug back in and you will know this immediately as the tightening will become real tight real fast, unthread the plug and try to rethread it very slowly, not all of this mechanical stuff goes quick.
A piece or relay part right under the right side fuel tank caught fire. Luckily I put it on time , why would it get hot or on fire? I was adjusting the idle at the time and it’s been backfiring
Stewart... The hold downs screws for the cover are over 10 inches long and the front bolt will not clear the tank.. Am I going to have to remove the gas tank to get them out... this is on the right side.. 2008 Boulevard 1400 S 83. After I saw this I stopped..
DUH... Face palm to me... I did not notice that the spark plugs are under the cover that the exhaust pipe is on.. Once I realized that everything came together.. Thanks Stewart.. it was my not watching carefully.
It is a shame you don't have a carb, you would only have to lean that out some, there would be a small flat head screw to twist counter clock wise and you would not have to change the plug.
I really don't understand why people create content, but don't bother to pick up a cheap camera stand so that we, the veiwer can actually see what you're doing ????? It's like turning up to a building job without any tools !!!
You know what I think the same thing when I look back at my old videos, some were pretty bad, but I like to think I got a little better over time and I was working with what I had 😆. Thank for watching anyway and maybe if I get another Intruder in the shop I will redo this video. I hope it helped though.
Thanks for the great vid. I changed my plugs today. Got the slightly hotter ones. Bike goes like a rocket now. Thanks
That's exactly what I need to learn. Thanks Stewart.
Very straight forward and educational. thank you sir!
Thank you for this video! You have helped me a lot! I have a LC 1500 Highway Star :D
Thanks for posting this.
I need to do the same with my 2000.
How straight forward and easy to follow have you made this? Absolutely brilliant, subbed!
I got the 800, decided I'm fixing my own. Just need to be sure boot is supposed to be removable from coil cause that's the only way in getting the new one back in lol
Good Video! Gotta say Suzuki sure makes it a job to check or change a spark plug on a cruiser! My wife rides an S40 and i have to take the seat and tank off to get to the plug. On my victory the plugs and wires can be changed in a 1/2 hour. Not knocking Suzuki though, fantastic motorcycles for sure.
Knock the hell out of Suzuki, I just got a C90 and hate the way the whole bike is designed, it is not new, I would not get a new Japanese bike, they are not designed as they should be and almost as bad as Harley's. Yeah, to get to the plugs you have to pull the so called tank sides off the first time, next time do not, just lift the plug side up some.
Very helpful , Gracias !!!
Thanks for this video! Did you find that lowering the plug (from an 8 to a 7) made a difference after some use?
If you ever do cross thread or strip the threads putting the plug back in and you will know this immediately as the tightening will become real tight real fast, unthread the plug and try to rethread it very slowly, not all of this mechanical stuff goes quick.
A piece or relay part right under the right side fuel tank caught fire. Luckily I put it on time , why would it get hot or on fire? I was adjusting the idle at the time and it’s been backfiring
Tetszik az előadás.
Thanks for sharing Bro👍👍👍
Could you do a video on replacing the coils on the same bike?
Would like that too
will that work on a VL800?
How many plug Suzuki desperado does he have
What is the plug gap please
Stewart... The hold downs screws for the cover are over 10 inches long and the front bolt will not clear the tank.. Am I going to have to remove the gas tank to get them out... this is on the right side.. 2008 Boulevard 1400 S 83. After I saw this I stopped..
DUH... Face palm to me... I did not notice that the spark plugs are under the cover that the exhaust pipe is on.. Once I realized that everything came together.. Thanks Stewart.. it was my not watching carefully.
It is a shame you don't have a carb, you would only have to lean that out some, there would be a small flat head screw to twist counter clock wise and you would not have to change the plug.
It has two carbs.
Why didnt you show how you got that left side out,I know why cause you cant with a normal socket .
I'm having a hell of a time getting mine out. I dont know if the previous owner really cranked it in there. Any additional tips on getting it out?
WD40 might help Bockbear
Can't help but noticing insulation on your garage door does that really work?
Sorry for the late reply but yes it helps a lot with temp. and sound.
Gap?
How many spark plugs are there?
It's a two cylinder... one plug each. 1+1=2
Ønsker å få se montering av saddelbox suzuki mc intruder 1400
get an extension
Te me vas de las manos jjjj
He sounds like Kermit the frog
Intruder vs 1400 👍🇷🇸🇷🇸🇷🇸🇷🇸🐺🐺🐺🐺🐺🐺🐺🏆
Is there only 1 spark plug?
Mohamed Elgarguri one plug per cylinder
This engin es two cylinders so you need two spark plugs one per each cylinder
I really don't understand why people create content, but don't bother to pick up a cheap camera stand so that we, the veiwer can actually see what you're doing ?????
It's like turning up to a building job without any tools !!!
You know what I think the same thing when I look back at my old videos, some were pretty bad, but I like to think I got a little better over time and I was working with what I had 😆. Thank for watching anyway and maybe if I get another Intruder in the shop I will redo this video. I hope it helped though.