2,670 watt solar upgrade part 2. Charge controller and batteries
Vložit
- čas přidán 13. 09. 2024
- This is the 2nd part for the 2,670 watt solar upgrade.
Grab a Pallet of 25 solar panels like the ones I'm using for only $500 at the time of recording. Also, right now they are having a sale where you can get anything shipped for only $150!:
www.santansola...
Here is the link to the 100 amp Epever charge controller which is $400 at the time of recording:
www.santansola...
This is for the 40 amp controller which is $130 at the time of recording:
www.santansola...
Thus is the MT50 controller that is needed to manually program the charge controllers which is only $25 at the time of recording:
www.santansola...
Assume that any link provided is an affiliate link and if you click on a link and make a purchase, the channel might get a small commission at no extra cost to you.
#epever #santansolar #vevor
Fo shizzle!
Looking Great!!
Hello
I didn’t watch the entire video so maybe you addressed this but the charge controllers should have adequate ventilation available as they get warm when running and the fans will be starving for air if it’s a sealed box. Just a suggestion but I would cut some vents in on the underside and also on the back near the top. The small 2” diameter round vent covers would work. Two on underside and two on the back near the top.
Thank you. I do plan on cutting a hole in the box and putting in an air filter for the intake and a vent on top for the exhaust. Once the inverter and battery charger go in, there will be no way around it
I gave you a thumbs up but it isn't showing up... I can never comprehend why these algorithms never work...
Thank you. I'm not sure what's going on with the likes. I turned the feature off, then back on. I might have to contact the youtube overlords to see what's going on😉
@@WindwalkerHomestead nothing like someone at the "home office" "improving" the software
@@rongray4118not sure if either are yours, but it looks like a couple likes worked anyways