How to Install a Breaker In Your Panel | LIVE!
Vložit
- čas přidán 7. 07. 2024
- DISCLAIMER: Always turn your power OFF before doing any sort of electrical work! If you want to learn how to install a breaker in a panel, then this is the video for you! Here is how you can be safe and successful step by step. Cheers!
For links to purchase the products in this video CLICK SHOW MORE ⬇⬇⬇⬇⬇⬇⬇⬇⬇
🔨 SHOP TOOLS USED IN THIS VIDEO🔨
OLFA Utility Knife - geni.us/UtilityKnife
DeWALT Drill - geni.us/CordlessDrillComboKit
Pliers - geni.us/PliersandWireStripper
Wire Cutter - geni.us/WireCutter
Shop Jeff’s favorite tools and great products and help support our next project!
► Shop Wayfair 🇨🇦: www.jdoqocy.com/click-9148559-...
► Shop Wayfair 🇺🇸: www.jdoqocy.com/click-9148559-...
► Shop Amazon 🇨🇦: geni.us/mlVE (Amazon)
► Shop Amazon 🇺🇸: www.amazon.com/shop/homerenov...
► Shop Home Depot: homedepot.sjv.io/nBVOX
► For discounts on flooring, paint, hardscapes, soundproofing and more visit our website:
homerenovisiondiy.com/our-aff...
*****Be sure to use the coupon codes before checkout
Did you know we launched a newsletter? Sign up here: homerenovisiondiy.com
Need Answers or Advice for your DIY Project?
BECOME A DIY MEMBER NOW!
Become a DIY Member by clicking the “join” button beside the “subscribe” button - / homerenovisiondiy
► Get FULL access to me and my team for Q and A’s in the DIY Crew Forum
► Participate in monthly LIVE streams for live consulting and Member support!
#justdoityourself #homeimprovement #electrical
SUBSCRIBE TO OUR CHANNELS
► Subscribe NOW and hit the bell to get notified about new videos - / homerenovisiondiy
► Subscribe NOW to our 2nd Channel Reality Renovision - / realityrenovision
► Subscribe NOW to our 3rd Channel Home Renovision en Español - / home renovision en esp...
FOLLOW US ON SOCIAL MEDIA:
INSTAGRAM: / homerenovis. .
FACEBOOK: / homerenovisi. .
PINTEREST: / homerenovis. .
TIKTOK: vm.tiktok.com/ZMeTfxwWd/
Produced by: Home Renovision DIY 2020
Disclaimer:
Videos produced by Home Renovision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Home Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Home Renovision cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Home Renovision cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code. HomeRenoVisionDIY may earn an affiliate commission if you purchase something through recommended links. #commissionsearned - Jak na to + styl
![How To Install A New Circuit Breaker DIY [AVOID Electrician]](http://i.ytimg.com/vi/ZsxZCrBt-L0/mqdefault.jpg)
![How To Install A New Circuit Breaker DIY [AVOID Electrician]](/img/tr.png)
Just to be clear. I am not advocating homeowners do this type of work on a live panel. simply being honest in the fact that I was so we could make a good video about the process. Please do not work with the power on. Cheers!
@@ragebeau it can easily be done live by anybody with an ounce of common sense. Jeff just has to tell everybody not to so they don't sue him.
@@ragebeau which is exactly why we tell everybody else to not do it.
@@ragebeau - so you'd rather have no video at all, with no safety advice. Anyone who watches this "Safety Third" channel knows that when Jell says 'dude, seriously, don't do this', you should probably listen. That said, Alex is completely right, it's not a complicated process with a live *residential* panel - as long as the main line has been installed and locked off, a 120v zap will suck, but it would take extreme misfortune to cause actual harm. Wire management is everything, so respect the electricity, take your time, plan properly, and then working live really isn't a big deal.
@@ragebeau ... right, because nobody would have figured out that a panel can be worked on live on their own... snore. SPECIFYING the risk is always better than ignoring it. That's all, I'm outta here.
Your disclaimer is fine except that for one ie the BC safety authority made it "illegal" to work on a live panel.. the clause being if there is absolutely no other way of doing so, and yes us electricians work live more often than we should, if caught we could get fined and even lose our ticket if we have multiple infractions like working without permits, letting apprentices work alone etc, there is a safe way of doing it, terminating the wire onto the breaker before attaching the breaker is a nono... sometimes on older panels the bus bar is sticky and trying to attach and remove a breaker it can happen you accidently turn it back on therefor increasing your risk of shock... ive worked with great electricians and with bad ones that shouldn't be walking with the amount of stupid they have done... of all the trades electrician is the most dangerous one...just because its in the disclaimer there are enough idiots that will copy your show and tell... in your disclaimer you should also say that any additions to the circuitry without permits aka done by the homeowner voids their house insurance..that is BC and pretty sure other places too.... I've read some other comments and am worried about the dumdums getting hurt, heck I've been licensed for 7years now and still get shocked almost monthly -only with the 120 but still ....
Journeyman Electrician here.. (USA) What you did was fine. I hate the way you strip your wire, but everyone does it differently. People need to be super super careful with that bare ground wire. If that touches something it's not supposed to touch, and it's super super bad news.
Agreed. That rotating move would get old. I prefer cutting at a slight angle then just give a slight twist.
Super super bad news? Who taught you English?
@@anonymous..- who taught you to be a dick? Only insecure losers troll informal CZcams comments for the sake of critiquing compositional style and vocabulary. Carry on anonymous keyboard warrior!
@@anonymous..- Who taught you manners? Do you always critique compositional structure and grammar on CZcams comments?
Some tips:
1. Don't strip the sheathing off the NM (Romex) before insertion into the panel. It's unlikely, but that sheathing helps protect against damage to the conductors as it goes through the clamp.
2. Cut just the end of the NM sheathing and pull the ground through to open it up. It will open like a zipper, and there's no chance of the knife nicking a conductor.
3. No duggada gun. In theory, those terminals have torque specs, but at least use a screwdriver so you have a feel for tight.
4. Don't work hot unless you absolutely must, and if so, wear gloves and safety goggles. Yes, I've done it, but at least take some basic precautions if you do, and if you are a beginner, just don't do it.
5. No super sharp bends in wires if it can be avoided. Think slightly gentle sweeps.
6. Slow down and take your time. You want to avoid damaging the conductors and to make sure everything is tight. You're not an electrician on the clock, don't rush.
Are you an electrician? I am in a trade school studying to become an electrician and we were learned to strip the cable the way that Jeff do (only difference is we use an electrician knife) and we were also learned to strip the cable before entering it into the box.
@@williamsavaria9722 I did, though I don't work in the field now. It's common to cut the sheathing that way, and I admit to doing it, but for beginners it's not the safest way.
As an average home DIYer, I really appreciate these additional tips. It's amazing how many little things you don't think about that could make the job easier (or more importantly, safer).
I have a pair of Philips, slotted, and square drive insulated screw drivers specifically for electrical work. A drill is 100% not needed for this application.
@@ZombieHedgehogMakes he can't help himself using the drill for anything and everything. Lol
Dude, you are the dad I never had but wish I did.
Mkay, that's kinda weird, brah.
So… are you going to call him daddy? Or just leaving me in suspense.
@@devilghost Nah he's saying he wish he had a dad to teach him some shit so he doesn't have to watch CZcams videos for basic shit everyone should know how to do.
Same,
At least your mom didn’t abort ypu.
I do this with my old pushmatic breakers in my 1950 home.
its pretty safe.
i have only died twice.
I died reading this comment! 😂
🤣
Lol 😆
Nothing beats a Pushmatic joke.
Haha I hate putting in pushmatic breakers. I'll be I haven't seen any in a while.
I was sitting on the edge of my chair after Jeff said he was doing it on a live panel! I clicked expecting a LIVE broadcast and couldn't breath until Jeff finished. I was waiting for an arc and to see his bones lighting up like in a cartoon!
sorry to disappoint. Cheers!
Not sure the video wouldve been uploaded unfortunately hahaha.
Being in the US, the horizontal panel was making my skin crawl lol. Great video tho! PS, the lack of depth perception from it being a video made me really nervous when you were pointing at the bus bars. 😂
Same
My panel (retrofit) is also horizontal, it was the only way to make all the existing wires fit into the panel due to length.
I thought the same but with all of his plumbing that high up the wall their wouldn’t have been room vertical
yeah then he had to label the breaker with vertical writing. Not ideal
I agree it’s crazy to see electrical panels horizontally it just doesn’t make sense to me
One thing that I was told early in my renos was to always use a long-shaft screwdriver instead of a drill, and after using both screwdriver and drill, I definitely agree with the advice. The tactile feel of getting that little bit of give on the copper to know that it's locked in place, over potentially over-torquing and compressing or even cutting the wire is very valuable. My best purchase for electrical was a rechargeable screwdriver (like $25). It doesn't have enough power to damage the wire, so let it spin until the motor complains, then give it a manual quarter-turn to lock the wire, and I've never had a connection slip or a damaged wire, plus wayyyy better dexterity than a drill.
And wrap the shaft of that screwdriver with electrical tape. Wouldn’t be a bad idea to wrap the driver bit in electrical tape.
On most half decent rechargeable drills you can set the torque. I use the drill every time for convenience. One quick squirt on a low setting and it's done. You need to experiment with the settings to find what's right with your drill.
Crank the torque setting way down and then hand-tighten as needed.
The rechargeable electric screwdriver works great in this situation. However, not every DIY homeowner have all the tools to do these projects.
Love this demo. I installed a new whole house surge(50 amp), and have decided on a 30 amp breaker addition for the basement equipment. This is a great refresher course.
Safety first.
I swear man you read my mind. Every time I'm going to do a project, you put out content on it. I'm not complaining. :-)
I always learn something new from you. I’ve taught people from all over the world while I was in the military and you’re a great instructor. Thanks
Jeff, I love all the down to earth videos of yours that I have watched, common sense, and very practical. You are going to have to lighten up on those 12 ounce curls you always joke about preferring to do on a weekend rather than whatever reno you happen to be in the middle of. You don't want to lose that youthful physique you have sported for so long as you enter your mid 30's. Seriously, I do appreciate all the great advice and tips that you have shared.
Just want to say thanks to you I really enjoyed watching your videos and to let you know you have assisted me in remodeling my kitchen two bathrooms a 16 x 30‘ deck in the backyard which we enjoy build a spare room for my mother-in-law with a standing shower again I want to say thank you so much for all that you do
As a working mom of 4 young children who STRUGGLES to make ends meet AND save at the same time, but also purchased a historic home (because it was economical) but finds herself constantly having to figure out how to DIY home repairs because it’s too expensive… you are a godsend.
YES,
such videos ARE a Godsend!
My dad got electrocuted trying this u cruel man why would u do this to us. I can't believe u
Jeff I have to say you are my hero! I've made some good money doing minor home repairs all from your videos. Thank you for such great content and keeping things simple and real!
Absolutely wonderful tutorial! you did it exactly like it suppose to be done! I always tell people to attach the hot wire to the breaker BEFORE you plug it into the buss.... love the video!
Excellent video! Straight forward and to the point with some humor thrown in. Thank you!!
Thanks yours is the only video that showed what to do with a pigtail arcfault circuit breaker! I really appreciate this!
I do a lot of live connections the important thing is to keep an eye on your hand a wire all the time
What I would suggest is to insert the wire to the box closest to the breaker ( to keep them better organized) and use insulated screwdriver to fasten the wire instead of the drill gun.
This video is right on time for me! I want to add a new breaker for garage outlets! And maybe a 240 plug!
Just swapped out several breakers for tandem breakers (my panel is 30 slots and rated for 30 tandems if I wanted) so I can finish out my basement and add two 30amp outlets for a server room. REALLY appreciate your videos!!!
Hi Jeff,
Usually when I work on live circuits, I use only one hand when hooking to the hot wire. This way I am sure that in the (unlikely 😉) eventuality of an an electric shock, the power will not reach my heart, closing the circuit between my 2 hands.
Also AFAIK, a good practice is to use the right hand as the heart is tilted left.
First I hook the ground and the neutral and lastly the hot wire, just as you did.
Have fun !!!
I was taught mumble45mumbleyears ago to always keep one hand in your pocket when working on live circuits. Of course the master electrician teaching me never actually did that, lol Just like Jeff... do as I say, not as I do. Heh.
Do you mean just use one hand to install the breaker after you wire it outside the panel?
I have installed breakers into live panels, I would suggest the mandatory use of electrician screwdrivers and not use an electric drill for tightening up the screws.
Good safety advice (every professional says do as I say, not do as I do). Another informative video for the homeowner. Thanks Jeff.
You bet
I work live panels all the time - my rule has always been only 1 hand in the box (and the other one touching nothing) unless absolutely necessary to have 2 in there. A shock across the hand is exciting but not life threatening. One that goes up your left hand/arm, across your chest and exits your right arm/hand is a different matter. Jeff, thanks for the video - I enjoy your style, banter and info... keep up the good work!!!
Exactly my rule as well plus if I do happen to have a helper with me I make sure there is something nonconductive close by. tell him if something happens to take it and hit the shit out of my hands.
Yup ,That will end You!
Retired from an Utility Company ,and when I was Young ,was getting some field training on an Transformer 3 phase Electric Meter standing behind the Service Man Instructer .The meter had bad lightning arrestors and When He grabbed the Meter to Disconnect it ,it Exploded -Fireball ,I instinctively grabbed Him by His shirt collar and yanked Him away from it ,as We were both Lying upon the Ground He started lecturing Me about Current going through Him and therefore through Me! Dang!!!!
The first time I added a breaker to a live box was when I was working in one of my rentals and adding a breaker for the new furnace. I told the tenants I was shutting the power off to the whole unit (shutting the box off) and a dude ran down and said, "wait! I'm on a tether, you can't turn the power off or the cops will show up!" So I did it LIVE. :) I do it all the time now-a-days.
Thanks again for the informative video. I have renovated so much following your videos. I added a shed to the house and just wanted to add a few outlets. This is so helpful!
i mean you knew you'd get flak for doing it live and you were right. I know your not advocating for homeowners to do live work and ill throw in a few warnings for people who are considering it. Coming from an electrician here in Canada, we do do this stuff live from time to time but we shouldn't. Even as a trained professional, fully certified we can make a mistake which could be something stupid as all hell but if you touch a live piece of bus at 200Amps, even if its just 120v your most likely dead. You gotta stop and think is the saved inconvenience of going to get a light to do the work worth never seeing your family again if you push something into the bus. You could blind yourself via a arc flash in close range or simply die. I feel obligated to say that while some professionals do live work we are also trained and equipped. We know practices to keep one hand off contact so voltage won't pass through your chest, we use composite boots made for electrical work with soles that keep you from grounding, we use 1000v rated tools that are non conductive, etc. Just stay safe folks, no one thinks it will happen to them but compliancy kills and electricity can kill in a instant.
Can we please pin this comment. I NEVER wire a live box. I have two kids and a wife. It is not worth it. I am also a software engineer. I need my eyes to make a living. I want to upvote the above comment. Don't be ignorant. Safety regulations are put in place to save peoples lives.
@@andrewgluck8740 Just wanted to say he specifically says to not work on live power but I've known dozens of electricians and I've seen numerous times them wiring live. In this video though if ya noticed the main breaker switch is down so the power supply to box was off. It is a great video for helping individuals that need to do the job themselves for whatever their reason may be. My father-in-law was an electrician and I learned plenty from him.
@@twhis9843 @Andrew Glück Just wanted to say he specifically says to not work on live power but I've known dozens of electricians and I've seen numerous times them wiring live. In this video though if ya noticed the main breaker switch is down so the power supply to box was off. It is a great video for helping individuals that need to do the job themselves for whatever their reason may be. My father-in-law was an electrician and I learned plenty from him.
If you touch the bus bar inside of a 200 Amp panel, its no worse of a shock than touching the live screw on a 120v receptacle. I dont care if its a 400 Amp 120/240v panel. You'll get the exact same shock. Of course any shock is bad, iincluding the shock from touching a wire on a 120v 15amp circuit, but its a major misconception even among electricians to think that the shock will be any worse. The real hazard is the arcflash if you cause a short in the panel while working on it. And that flash/blast will be exponentially worse on larger panels.
People like you are why we have instruction stickers on ladders.
Entertaining. Simple. Short. Perfect. Thank you.
You just saved me $200! Electricians, like plumbers and HVAC guys, are very costly and often dishonest. This allowed me to replace a poorly installed breaker in one of our rental units. The entire panel was replaced and new copper mains (removing the old Al). The panel was PURPOSELY installed WITHOUT a main breaker, SO THAT YOU HAVE TO HIRE AN ELECTRICIAN to do repairs. THEN, OF COURSE, they installed the cheapest CRAP breakers. When the disposal unit leaked, it caused a short, and the breaker tripped and would not reset. So, most people would be forced to call in the thieves! Thanks to this and MANY of Jeff's videos, I DIDN'T get ripped off! Thanks Jeff!
Well another video from my buddy that saved the day. Learning so much through your videos and you take the nerves away from doing these things. Probably because you add a little bit of humor when you talk about the dangerous parts. Thanks again!!!
I am in process of buying my first home and I thought the double taps would be a big deal and an expensive fix. After watching other videos and this one, I could easily fix the double taps myself and learn how to care for my home better too!
Hello, Jeff! Thank you for another great and comprehensive video! There is virtually no one else I trust on CZcams when it comes to DIY projects of this sort of magnitude. Yesterday, I finished installing a 20A breaker dedicated for my home IT network. I am not an electrician by trade, but by "experience" --- lots of experience performing electrical work in both of my homes and most recently was my installing all the electrical conduits and infrastructure for our new outdoor patio, outdoor BBQ kitchen, fire pit, low voltage wiring, light switches, outlets, and landscaping lighting (walkway, stairs, sitting wall, etc.). I did hired an electrician to perform the final inspection and blessings before going live.
I checked out your video yesterday because I needed a quick refresher course and your instructions were dead on. I read other comments from so-called "experts" criticizing your work here. I won't be surprised if folks criticize a CZcams video demonstrating how to use a screwdriver to screw in a screw. Ha! Ha!
Anyhow, one of your main suggestions in this video that helped is to always carefully and methodically approach this project and most importantly, ensure the new breaker is turned off.
I don't have that level of expertise as you; so I turned off the main service panel and went to work. From the time I turned off the service panel to installing two 20A outlets in an old work 2 gang box, wiring, and finally installing the breaker, it took about 45 minutes. Of course, I checked and re-checked everything and once I was satisfied with the results, I went live! I checked everything with my tester for grounding and wiring: Pass!
Of course, there was about two day's worth of planning: from planning to executing this DIY project. Thanks, Jeff!
Well Done. Cheers!
@@HomeRenoVisionDIY hey Jeff, i am trying to add a LED LAMP to a CNC machine using 3 conductor wire. (cnc machine has electrical cabinet etc) do i need a breaker ??? or should i just ground it, find. a spot for white and black wires in the terminals?
Thanks so much, this video was very helpful. Was very detailed and easy to follow. Great Job
You're a genius! And your smile makes me choose your videos over others lol
All the master electricians have left the chat
Yep!
Skill set of a first year…sloppy sloppy.
Yes, because it looks like shit, no safety by wiring live, no torque driver..
As a master electrician he as a renovator should not be promoting people to work live on equipment if not qualified. Wear safety glasses. A piece of molten copper in your eye is not good. Don’t use a drill to tighten. Hand tighten by feel.
😂
I love this guy. I've learned SO much. He provides confidence and great context, with the heart of a teacher. Thank you!
I always work with the power on. Keeps you honest.
I am so glad you do what you do. You have helped me tremendously! I like how you make it real.
THANK you for telling people to LEAVE ENOUGH WIRE TO BE COMFORTABLE. Honestly - be nice to your future self and maybe the person who is working on this after you're gone won't be cursing your name for years on end.
To the point, and plenty of common sense, well done 👍
GOD BLESS you. You guys rock. Thank you guys for being the best and detailed.
This was great. I'm about to add another breaker to my garage.
Just want to thank you for all your videos! I live in Lake Charles, LA and after two hurricanes hitting my house im doing all repairs myself and your channel has helped so much! Keep up the good work
Glad to help
Love it. Thanks Jeff.
Thank you much. Your Video and explanation are very clear and plain. I also would like to see with 3 wires which is neutral one. Awesome.
I have learned a ton from this channel but as an electrician i have to say .Never use a drill on lugs,Never attach wires to devices before you install them in a panel. When you install a breaker first hook it on the non conductive plastic(retaining) rail and it be properly orientated so when you swing it into buss it fit perfectly. Also DO try to land your neutral wires on the neutral buss so they match the breaker and be very neat about your wire routing both in and around the panel as workmanship can equal a fail or at least cause inspectors to look deeper into your job............ And get the Electrical Code Simplified by Knight Publishing. I think they have the residential edition at Home Depot.
I keep on learning thanks
Going to have to upgrade my panel when I redo the kitchen. (Already in the budget) will be having it installed by the pros. Will assist with the connections if I can. Used to be an electrician in my younger days but haven’t been one for the last 30 years. No longer licensed. A lot had changed since then but the basic concept hasn’t. Am slowly upgrading all the plugs & switches as I go. A few of them are a bit nasty looking.
Sorry I missed the live broadcast last weekend.
Great 👍 video our home electric panel was build 1981 by amateur need new one
Your insight are completely honest
To hank you Jeff
Great video, thank you
Now that's true bravely lol Cheers!
Great demo, man !! I really like the way you suggest to leave a little bit of slack on the wires. As time goes on, someday an electrician will thank the last guy who left the extra wire. As panels fill up over the years due to an increase in circuit demands, we often have to get creative and start physically relocating wires. ( I’d MUCH prefer take a minute to relocate a complete cable than I would to simply splice and extend the hot. I find it is lazy to splice a hot if the option to physically relocate the whole cable is available).
I know my next thoughts weren’t part of the point of your video, so it is possible you think about this stuff as a contracting consultant too. Since your panel has loads of available spaces, one thing I like to do in an Eaton panel is leave spaces 1,3 and 2,4 empty for a future surge protector and/or a future generator transfer breaker. The closer to the main panel 200 amp breaker, the more reliable a surge protector will work, so spaces 1,3 make a nice spot to reserve for that option. It’s been awhile since I installed a mechanical interlock but I think it goes on spaces 2,4. I generally mention the idea of generator backup to my clients whenever I am at their house, so why not position their panel to be easily generator- ready. Just forward thinking… cheers !!!
Great stuff as always!!!
Thanks for this awesome video. 👌 content for small project diy owners.
I love this!
Awesome video man. Do more of these!!!
Thanks! Will do!
As allways great vidiio . Thanks Jeff .
Very nice. Thanks
Love this dude!
This is the best video on CZcams, plus you’re awesome.
Another interesting subject would be to instruct flipping 240 to 120 - should it be a dedicated circuit. I learned this on my own, its not too hard. Also my bus bars were so old they had gathered grease and oxidation. For contact and safety I pulled out all the breakers and cleaned them with contact cleaner and a wire brush to prevent arc/heat.
You’re the best bro!
Nice well explained 👍🏼
I am installing a solar system into a van, still has a breaker box to learn about from you! Thanks!
Wow! That was great! Thank you!
14:35 best face ever! 😂😂😂
Works perfect every time,right Jeff...🙂
Cheers!
Thanks for the video
Your awesome thank you for great videos!!!!!
Great job brother, love your presentation tutorial...
very good video & thank you for showing us ...!!
This dude make my day ..
man I love this guy
That’s well explained
That’s the real deal
Someday you should do a video on how to add subpanel that would be great !
Coming soon!
Please do a vid how to add a 220v to the garage, for a welder or even car charging.
Thanks for great content as always.
Yes learning to do 3 phase would be great.
It's like 120, but with an extra hot wire and a double breaker. Well, a little more than that but pretty simple.
@@dustman96 yea i was going to say...not much different just an extra wire....depending on the amperage bigger wire
@@MrBigjimbrown 220v is not 3 phase, also hardly any homes in the US have 3 phase.
@@MrBigjimbrown You would likely have to have your hydro company run 3phase to your house. Residential homes don't typically have that.
You are the MAN !!
Thanks!
Thank You👍
Another great video.
Thank you for the video. I knew I could do it but just needed verification 😊. You have great videos.
Like you sense of humor. 😁
your boxes are funny looking. never seen one like that b4
Thank you so much for the lesson! I really like the type of staple you used to keep the wire on the wall. Looks like it screws in right? I can't find them in store. Could you possibly send a link? Thank you so much again for saving everyone $$$
Thank you
Every wire stripper I have used puts a nick in the wire. So I start by putting 14awg wire in the 12awg spot and see if that cuts the insulation enough to remove it. I don’t know if I’m just doing it wrong but this fix alwas seems to work for me.
If the larger hole doesn’t cut the insulation enough I then use the correct hole.
loving the decora cover on the tranditional receptacle.. haha
and using the 14 stranded instead of the 14 solid on the strippers!!!
Very informative. I hope you will talk about 220 v in future. 👍
You’re the best
so much extra wires 👀 the perfectionist in me is screaming
Great Video Jeff!! in the
US. We call that hammer a Klein hammer LOL!!
Jeff how did you know my (new!!) sewing machine doesn't play nice with my AFCI circuit breakers 👀
thank you
Doing this now for my basement remodel.
using unisulated tools on a live breaker panel with no glasses, gloves or PPE ....very nice Jeff show the world how its done right
My dad has been a electrician for almost 40 years and still turns off the panel. He always says it only takes 1 time to make a mistake for it to be your last mistake
Probably best advice ever
Quick question. When you pointed to the AWG size on the wire strippers @6:27, why did you use the stranded wire labeled side when you were stripping solid core wire?