LS Swapping a Squarebody C10 | PECOS GETS A NEW HEART | Part 1
Vložit
- čas přidán 16. 06. 2019
- In this video, we're LS swapping a squarebody c10 - @twotrucksron's squarebody C10 to be exact...yep, Pecos is getting a new heart.
WE SURPRISED OUR BUDDY WITH A 1984 SQUAREBODY C10: • WE SURPRISED OUR BUDDY...
Two truck's Ron's IG: / twotrucksron
Speed Engineering LS Swap C10 Longtube Headers (do not hang below frame rail on Pecos): amzn.to/31HzjFd
GM Muscle Car Oil Pan(19212593): amzn.to/2CBosBn
Corvette-style fuel regulator:
WIX 33737 budget option: amzn.to/2X0Qm1v
AC Delco OEM-spec option: amzn.to/2LjqADv
If you haven't seen the rest of this LS Swap series, check out the playlist below:
• LS Swaps
Or if you want to pick and choose, select one from the list:
Part 1: • LS Swapping a Squarebo...
Part 2: • LS Swapping A Squarebo...
Part 3: • LS Swapping a Squarebo...
Part 4: • LS Swapping a Squarebo...
@C10Squared's list and commentary on LS Swapping a Squarebody C10 (cleaned up for CZcams description format and WG's advice incorporated). WG's Amazon Affiliate Links will be provided where applicable (parts purchased via these links supports WG)
Keep in mind this is for Squarebody trucks. Primary differences for other year C10s will be fuel tank setup and engine mounts. For example, Dirty Dingo mounts seem to be preferred for 67-72, however Tejas are preferred for 73-87 c10s. This is my (c10 squared) recipe and there are many ways to do this; this is just how I do it.
Engine mount plates Tejas Steelworks $100
Chevy 350 engine mounts $40
Gaskets for headers above Summit NAL-92202326 $25/pr
Radiator - new factory radiator $120
Lower radiator hose Napa PN 7499 $30
Upper radiator hose for a 2000-2006 suburban $40
1999 Ford Windstar fans from RockAuto $90
Tanks Inc Fuel Injection tank for 1973-1987 $225 + shipping
Tanks Inc sending unit for stock gas gauge $35
Tanks inc GPA4 fuel pump kit (walbro 255lph pump) $225
(the above is for trucks, if suburban has rear mount tank, would just
buy a new one of those and then install a 1987 Suburban sending unit and a walbro 255LPH pump and use 5/16 and 3/8 to 6AN compression fittings; you can also save some $ and use your factory truck tank with a 1987 sending unit/walbro combo with compression fittings)
Tanks Inc LS swap fuel line kit with fittings & regulator $235 (fuel regulator info above)
Engine harness:
I use BP Automotive for the harnesses and use the premium service which includes fuel pump relay $550 (Ron used PSI on Facebook and WG used PSI on Teddy as well)
Fan harness with relays $80
Tuning (I have BP tune the ecm or buy a tuned one from them $75
Drive shaft shortened if needed $200
o2 Sensors if needed $100 amzn.to/2L1kwzp (for PSI harness; check for BP)
Lokar shift linkage for 4l60e $65 amzn.to/2Xr5WaW
Lokar transmission dip stick $100 amzn.to/31I2g48 (black)
Lokar oil dip stick $100 amzn.to/31G0Xm7
you can probably use the factory LS dipsticks, but I always use the lokar...they look nice.
depending on year of engine, may need the following
single rail fuel rail from 2006+ engine $100 used or buy new billet
Truck gas pedal for the DBW (needed for 2003-2007 engine)
we have also had good luck just buying a billet block off cap for the return on the fuel rail to save some $ - $75
Custom Exhaust $400-500
Suggested:
intake gasket set $60
valve cover gasket set $30
oil pan gasket $30
New power and ground wires to battery $40
You'll also have to figure out some type of cold air intake, i have seen people use the stock truck ones too. I paid like $65 for the chrome one for a silverado on amazon.
GAUGES:
Depends on what you want to run. You can do custom gauges from Dakota Digital, auto meter, etc, or you can set up stock gauges to work with a convertor from cableX etc.
#Pecos #TwoTrucksRon #SquarebodyLSSwap - Auta a dopravní prostředky
Y’all did yourself. Awesome 👏 excellent video finally a more better detailed on swapping a LS Engine. Thanks guys!
Thanks for watching! More to come.
Awesome info, Love the hands on. Seems like a great group of friends.
thank you for not being obnoxious like some of the vloggers on CZcams. nice upload, thanks.
Thanks, John. Appreciate you saying that. Just a normal dude with good friends who love trucks.
I am glued to this playlist. You guys are killing it and I'll be following along as I do my swap in my 72. Great Job!!!
Thanks, Jeff! Appreciate you tuning in and for the kind words.
Damn I need to start a channel with my c10! Keep up the great content!
Love it!
Do it! It's a lot of work but a lot of fun. And thank you!
Great video! Excellent content for the channel! Keep it up! Congrats TTR for the swap!
Thanks, buddy.
Very interesting on how to put a newer engine into a older ride. Thanks for the video. 👍
Yes sir! It's a novel concept.
Awesome video......congrats for the install!
Thanks!
Pecos is gonna be sweeeeeeeeet rolling with the ls. Love the stance on that truck. Awesome video and keep them coming
No doubt about it!
Great video as always,it helps allot to see how put it all together.. good work 👍.
That's what we're trying to do here for sure. Informational and fun.
Beautiful video. By watching this videos it influences me more to do an ls swap on my 1983 square body. Great help by doing this with 2 people.
Yup, it pays to have extra hands and knowledge when messing with these old trucks. 3 heads are better than 1.
Chevy man for life right here keep up the good work y’all rock 🤘✌️👍🏼👍🏼👍🏼👍🏼
Sweet! Thanks for tuning in.
Im super stoked on how the channel is growing. Good job on the c-10 fellas 👍👍💪
Thanks, man! Us too!
To cool glad yall are doing a LS swap on camera. UBT 4 life!
Yes sir! Trying to keep it fresh and quality. And real.
Great vid. Looking forward to part 2
Yes sir! We're trying to coordinate our schedules now to get it done.
I can’t wait for the next vid bro ! Again Robbie awesome content
Thanks, brother!
Awesome progress on the truck! TTR looks super happy. 😎😄✊
Thanks! And yes, he is.
Doing an awesome job. Two trucks Ron looks like a man on a mission
Thanks, man! And yeah, he was ready to get on with it.
Nice work!!! With friends, anything is possible!!!
Just put my psi conversions harness on today and fired it up 😉......great products and absolute great customer service..i ordered the wrong 02's and before they shipped it they emailed me and corrected me on them...saved alot of waiting time ...great video guys!
They are legit!
The way it should be! Keep rockin
Fo sho!
Can't wait to hear it start up
We're getting closer each day.
Yes sirs really cool glad you guys did it
Yup! Just getting started really but Ron is making it happen for 'ol Pecos.
The truck is coming along nicely and another great video 👍
Yes it is! Thanks for tuning in.
Thanks so much for this, I’m based out of Duluth GA and follow southeast squarebodys and c10 club GA. My small block grenaded on me and I’m also doing this swap, a little nervous but I’m for the task, can’t wait for part two!
Man, you can do it! Thanks for following along with C10 Club Georgia. I actually started that club here 2.5 years ago and just stepped down recently. My friend Chaz runs it now. Love that group of guys.
Awesome video, great build. I would have kept the headers on and installed by removing the front clip, grill and bumper. Slides in nice and easy squeezy after that.
You guys Rock!!! Love the videos you guys put out, keep up the amazing work ... I’m about to drop the same into my 85 c10. I took the clip off to install mines since I don’t have a buddy like you have that’s willing to get their hands dirty
Thank you!
Great video
I just found a LM7 & 4L60E for under $1,000 yesterday. Complete with pedal, harness and ECU. Pick that up, strip it down and make a 383 stroker with it.
Thinking about picking that up for square body project, so this video is perfect.
Nice job fellas. 👏
You guys are good, you even got momma helping
Haha she's all in!
That's badass brother, I hope to one day do something very similar to my 79 square body. 👍🏼👍🏼
Been looking forward to a video like this one. I’ve got an 86 that’s super clean with the 305/700r4 and once i get tired of cruising and want to jam, this will be the plan.
Heck yeah! Glad we could fill the gap for you. More to come.
Way to go TTR!!!
TTR!!!!!
nice work fellas!
Thank you
Nice I went with the psi harness as well! Looks like it’s gonna be a nice truck! Enjoying the content!
Thanks, brother! And yep. PSI is the way to go.
Great vid!
Thank you! Part two is coming soon.
Sick channel man! love the build
Thanks, man! We're having a blast with it.
Good job fellas, love that trucks original paint scheme. Can’t wait to hear that thang chop... Ol boy needs some safety glasses while runnin that death wheel! Ain’t no joke, especially without a guard, I’d be protecting them fingers as well. Keep up the good work, stay safe.👍
Thanks much! He's a wild man. Try to tell him to rock the safety shield. Heck, the Crocs are bad enough haha
Dang I need a friend like yours! lol im about to get ready to drop my ls in my 82 c10. So dang stoked! Great video!
Sweet! You'll love it.
@paul did you get it done?
@@jrobles1019 yeah I did. I just have to tune my carb and hook up the kickdown cable. Sounds so good.
I didn’t subscribe on the K5 2 wheel drive video, but you got me hooked now keep up the great work
haha thanks for tuning in.
Heck yeah man it's going to be awesome
No doubt about it!
You guys are awesome
Great work.
Thank you!
Loved the video
Thank you!
Great content guys
Thank you!
Great build guys a lot of super information. I'm building an 86 Chevy 3+3 with a LQ9 and a 4l80E to a 205 t-case. But I draw the line on 2Trucks crocks he's wearing and I'm from Pecos Texas!!! Lol keep on trucking!!!
haha it's his signature look
Great Job!!!
Thanks for tuning in!
Great video 👍🏿👍🏿👍🏿👍🏿👍🏿guys keep it coming ls da world
Thanks for tuning in!
This is a real good in depth video. I have a 83 GMC square body that my dad left me when he passed in 2017, that i would like to get running and possibly swap the motor. currently in AFG but plan on gettin it running again jus for him. Good work guys.
Thank you very much!
Good job guy’s
Thank you!
Great video...😎 👍 👊
Thanks, Jamey! Got more than an emoji this time. haha
Tnks for the video I learned the Best way of doing it
Some of my favorite memories are from doing this exact thing with my friends
Yes sir! About to be back at it soon.
I just started following you, i have a c20 and watched your video of the holly efi and now i think im going to do an ls swap instead, looks like you are from santa fe just like me happy to see people from new mexico
Like that new intro!!!
What new intro?!?! I forgot to say 'where we're United By Trucks' ugh
Super sick🔥😮🤘
Thanks!
badassness
Thanks!
I don’t know how you don’t have a million subs, the quality on these videos is insane! Keep it up man!
Thanks, buddy! That means a lot. We've only been at this for 7 months and I'm simply blown away by the growth we are having. Just keep telling your friends and watching!
Whitlock Garage I will man!
I got me a little Squarebody project going, it might get the LS treatment after watching this.
Sweet!
love the channel
Thank you
Great job you guys! I just got my first Square body. It’s a 73 crew cab C30 And I’m hoping to do a swap. Thanks for all the info.
Thanks for tuning in!
Dig it guys! My buddy has one and he might do something this video will be very helpful! Subbed!👍🏻
Sweet! More to come on the install in the next few days.
@@UNITEDBYTRUCKSpornstargirls
I think you're an awesome guy special dealing with GM Chevrolet is like the ultimate the best you're awesome dude keep up the good work thank you again for sharing them Chevys
Well thanks!
Good video guys. Gonna help with my swap
Sweet! Glad it's going to be of value.
Sweet!
Another great video can you do a similar detailed video with ls swapping a 67 to 72 C10
That's the plan! We have the perfect patina blue stepper that is in the works that will get the treatment.
I put a 5.3 in my 80 GMC last summer, it was very straight forward, no real challenge to the installation at all, looks like it came form the factory that way. 👍🏻
If you have the right parts and a little know-how, it can be done pretty easily. Ron has been going the extra mile so that has made a big difference too.
Whitlock Garage, I’ve done other LS swaps in cars so it wasn’t exactly foreign to me, but trucks are a little different as you well know. My GMC was a very fun project, my next hair brain scheme is a big block C10. 😁👍🏻
Well done boys, hurry up with the next video please 😂👍
haha no pressure, huh, Allan?
Yes heaps, can’t wait to see how it all turns out😃👍
Looking for a cold start with new heart 👍🏼🏁
Coming soon!
Nice man....I have a 1985 c10 Silverado I still got the 305 in it i been bezzy doing other things.....nice truck by the way....👍👍👍👍👍👍👍👍👍😎
Awesome! Thanks for tuning in.
Wish I could do that to mine!!!☹️
Great video!!👍🏼👍🏼👍🏼
Nice work guys. I wouldn't be getting in the engine bay though anywhere near an engine hanging on an engine lift.
Thanks! As long as you keep those extremities on the outer edge of the path it could fall, I think you're good. That said, I would not recommend anyone do it that way unless you have some experience around an engine.
Team work man hell ya
That's what we're all about!
Well done gentleman
Thanks, man!
It looks great in that engine bay of that beautiful square body
No doubt about it!
Nice work, usually the last men standing are the diehards awesome job, I
Thanks 👍
" I don't want to get my hat dirty!"
( he says, while wearing a Mike Finnigan Blasphemi T-shirt)
Homeless Dave is laughing his a$$ off!
hey from Phoenix AZ cool truck
Cant wait to do the same to my 76 custom deluxe, I wish I had friends like you guys ..lol
Good luck, man. Just plan it out and make sure you have everything you need.
@@UNITEDBYTRUCKS I already have the engine and tranny...but now I know where to get harness and ecm (BP auto.) Thanks for listing all the other parts
I pulled my core support. I wasn't about to dance with it. lol
Also, Tip of the day which I'm sure you already know, Zip Tie a Lunch bag on the Tail Shaft. You spilled a ton of Fluid haha
Nice Video!
Thank you
"we be doin a lot better you put that camera down. " haha homie was irritated
you can get the motor mount bolt out of a small block without taking a fuel pump off all you need is a wrench on tonight in between the pump in the mount
Gonna be dropping an LS in my 73 short bed later on in the year. Decided to play with a 383 first haha
Hell Yeah!!!👌👍
Exactly!
Ok. Good deal.
That thing is just sexy! Now I know what to look forward to when I get around to swapping my engine out for a 350 in my 91 Chevy.
Yes sir! That was the point of the video. Really glad you dig the content and the truck!
A Lead hammer will take that ding out of that rim with a few hits I got same wheels on 53 belair ran some low pro hit a pot hole coming out the dam shop boy I was pissed got home seen the big dent in my wheel got my lead hammer from my wire wheels hit it a few times and back in place nice job love the videos just picked up a 63 c10 🙌🏽🙌🏽🤣
My man said, "We'd be doing a lot better, if you put that camera down". Almost spit my drink up.
Haha he’s doing a lot better bc of that camera 😂
Great vids, I’m getting to do an LS swap into my 1985 C10, trying to find the parts list you speak about in the video
Sweet! It's in the description of this video. Under it there is a box you can expand that has links etc in it.
Great job guys I’m a big fan and congrats Ron on your baby remember that date and it’s pacos birthday that thing is gonna be good for 300,000 miles buddy
Heck yeah! Thank you.
Damn I didn't know speed engineering had plug wires. . They headers aren't expensive but I have long tubes on nbs and love em
Yup. They make it easy for ya.
Good job 👏🍻👍🇺🇸
Thanks!
All I run are rc trucks! And my 06 Mercury Grand Marquis, but that's more truck then most trucks anyway lol. Definitely gonna order that hat u got! #trucks
Having. Fun
Always.
Great job love viedo like see more god bless
Coming your way!
nice job
Thank you!
Getting g the engine in is a easy part I wonder how to get AC, power steering and if you could make any of the stock gauges work
I wouldn't say easy, but yeah we'll have more on the AC power steering and gauges in future episodes.
MY KINDA WEEKEND!!!...
GMC FTW!!!...
NE41981 GMC CABALLERO"
Yes sir!
look good my brother im gonna have to send you boys some good music
Haha we’re all set. We’ve changed up our music quite a bit since these videos.