Definitely would love to know what full bolt ons meaning everything intake, full exhaust and all piping, Intercooler, upgraded pure turbo and E85 on a Stage 3 BootMod3 tune and see what it can really do without changing any of the internals.
If there’s one thing I wish I could really do to my F32 Gran Coupe, it’s a Big Brake Kit. I love the way they look, makes such a huge different in appearance.
There are two solutions to the wheel/hub misalignment problem. One is to insert wheel studs as you did. The other is to go to Harbor Freight and pick up item 58146. Two of those pins will fit the F30 hub. You insert them into the hub, pick up the wheel and place over the guide pins, then start your other lug bolts. I also use them while removing wheels just to be extra sure that I don't bend the brake dust shield while pulling the wheel off. You never know if the wheel is going to be stuck to the hub and require some encouragement to break free.
Would like to see what car is capable with rebuild engine, Better pistons, bigger turbo etc... N20 are so underrated, their biggest issue is timing chain. Theres only few build n20s on the internet.
A company in Australia called Navardi has I believe the first built/sleeved block in the world for the N20, 1000HP capable, they have a build currently underway, very keen to see how they go with it.
Love when there’s a new video always a good day when there is! ALSO i have been looking for those stock wheels for a very cheap/ good price or a trade for my wheels are you looking to sell or trade those wheels that u took off ?
While I'm at home mad mines won't turn on after putting new fuel pump new battery only turns on by putting gas or starter fluid threw the intake than shuts right off. My SPACESHIP TURNED ON TODAY WASTED 600$ the actual problem 38 dollars 😅😅
Hey are you guys selling those old M wheels? I need a set for my F80 (the stealership sold me mine with knockoff china wheels) i need 2 rears and 1 front but obviously would buy all.
ISTA calls for you to cut a 10mm line across the thin part of the rear brake shield in order to slip it on. In conjunction with you to replace the rear emergency drum brakes for the retrofit. Cutting it works though🥲
Hi! Great video. I've installed the same dimpled/sloted rotors on those same calipers which came with a car from the factory. Originally car came with blank rotors. Now there is awfull silent chirping cricket like sound while driving next to the wall or car etc. with windows down. Investigation on the interwebs showed almost all people had the same issue after "upgrade" to dimpled/slotted rotors. Did you have the same issues? And if not, please what pads are you running? Manny thanks! Regards!
I've been running the Bilstein B14's on my F32 440i for 2 years now. They are very stiff....create a very firm jarring ride, too hardcore for british roads. It reduced the pitch and roll over the stock M-sport suspension a fair amount which was great, but made no difference to the balance (still understeer on turn-in). Would be keen to hear how you feel they've changed the handling of the 328i. I regret not spending extra and getting the adjustable B16's...
You’d be better going down the alignment route to dial out oversteer, suspension isn’t generally going to affect it with the exception of anti roll bar stiffness. Increasing toe out or caster would probably help.
Have you sorted out your turn in understeer? new to F30 chassis and I noticed this too on my first few runs, handling is great however the understeer..
Finally some N20 love
N20s are ticking time bombs
Upgraded turbos and/or E85 hopefully ;) Would love to see you guys take this N20 to its limits!
Definitely would love to know what full bolt ons meaning everything intake, full exhaust and all piping, Intercooler, upgraded pure turbo and E85 on a Stage 3 BootMod3 tune and see what it can really do without changing any of the internals.
@@James_Edward59 the N20 is at it limits without a turbo or E85 sadly. they can't hold a ton of power reliably :(
@@TheSundaeDrive mine pushes out 450,000 hp at the wheels and redlines at idle. What you mean they can’t handle the power?
Where's the proof it can't handle power I keep coming across faster and faster ones not crazy fast but surprising for what I've heard the limit is
The editing on these vids has really gone to a whole new level. Great quality BMW content. 🤝
If there’s one thing I wish I could really do to my F32 Gran Coupe, it’s a Big Brake Kit. I love the way they look, makes such a huge different in appearance.
There are two solutions to the wheel/hub misalignment problem. One is to insert wheel studs as you did. The other is to go to Harbor Freight and pick up item 58146. Two of those pins will fit the F30 hub.
You insert them into the hub, pick up the wheel and place over the guide pins, then start your other lug bolts. I also use them while removing wheels just to be extra sure that I don't bend the brake dust shield while pulling the wheel off. You never know if the wheel is going to be stuck to the hub and require some encouragement to break free.
B58 swapped would’ve been insane on this build love it keep up the good content guys 🤙🏽
Love the new format!
Love it! Great work. Amazing transformation so far!
Definitely satisfying to see some 328 love lol
Built motor DCT swap? 😢
Yoo that juggling came outta nowhere
I'm loving this build lol, so entertaining
Great cinematography at seconds 50-55! That was neat!😎
Definitely putting the brake upgrade on my list to do . Cars looking good!
The only CZcamsr I would trust with my G20. Love the editing man. Keep the videos coming!
Another amazing video! And you can juggle! 😮
Great job I’m planning on getting a 335i and I wish I can make it look as good as yours
really great content as usual. I just got a house with a huge garage so i cant wait to put a lift in and do this kind of stuff finally
Phenomenal work as always
Great video. That car is slowly becoming the best F30
Would like to see what car is capable with rebuild engine, Better pistons, bigger turbo etc... N20 are so underrated, their biggest issue is timing chain. Theres only few build n20s on the internet.
A company in Australia called Navardi has I believe the first built/sleeved block in the world for the N20, 1000HP capable, they have a build currently underway, very keen to see how they go with it.
@@ts0874 i would check it out, thanks.
Best moment 6:50 hands down😂🤣
Love when there’s a new video always a good day when there is! ALSO i have been looking for those stock wheels for a very cheap/ good price or a trade for my wheels are you looking to sell or trade those wheels that u took off ?
I need to do this to my diesel 3 series
amazing how much wheels change the look of a car. nice job :)
Are those bilstein b14s? I love my bilstein b14 on f30, great for daily and spirited driving and some track.
While I'm at home mad mines won't turn on after putting new fuel pump new battery only turns on by putting gas or starter fluid threw the intake than shuts right off.
My SPACESHIP TURNED ON TODAY WASTED 600$ the actual problem 38 dollars 😅😅
Wish you could restore my f30 same way uff.. amazing job brother
Car turned out fantastic - first car we painted after wrapping it haha
Love this stuff. Would love to know what rotors you used with the brake kit as it isn’t in the description
Yooo i remember seeing that first video years back, lol 💜
It is a new car by definition
Nice Build what oem BBK would you recommend for a 2016 BMW F10 535I?
Is there a video of the exhaust jobb?
Hey are you guys selling those old M wheels? I need a set for my F80 (the stealership sold me mine with knockoff china wheels) i need 2 rears and 1 front but obviously would buy all.
ISTA calls for you to cut a 10mm line across the thin part of the rear brake shield in order to slip it on. In conjunction with you to replace the rear emergency drum brakes for the retrofit. Cutting it works though🥲
is the 328 an x-drive?
Low key totally miss Frankenstein though but silver is looking 🔥🔥
Why were we all obsessed whit Matt blk this looks so bad lmao love the wheels
We need b48 love
Do the wheels & tires rub under "spirited" driving?
Aren't the OEM control arms all rebuildable? You simply swap in the new silent blocks
Good transformation 😊
Have you guys did a downpipe video for the n20? I can’t find one
looking forwards to the upgraded turbo videos cause lowkey have thought about it
Yessir 🤜🏻🤛🏻🤘🏻
很棒的改装。我也拥有同款BMW 328i
U guys should do some 330i b48 content
Awesome video ! I just wonder why you choosed Bilstein over KW v2 or v3 ?
Let’s go n20
Imagine me winning this 335 😢Biden won’t talk to me cuz imma be the most Hollywood guy on the planet😂😂
Put mclaren or Porsche carbon bucket seats in it
Hi!
Great video.
I've installed the same dimpled/sloted rotors on those same calipers which came with a car from the factory. Originally car came with blank rotors. Now there is awfull silent chirping cricket like sound while driving next to the wall or car etc. with windows down. Investigation on the interwebs showed almost all people had the same issue after "upgrade" to dimpled/slotted rotors. Did you have the same issues? And if not, please what pads are you running?
Manny thanks!
Regards!
I've been running the Bilstein B14's on my F32 440i for 2 years now. They are very stiff....create a very firm jarring ride, too hardcore for british roads. It reduced the pitch and roll over the stock M-sport suspension a fair amount which was great, but made no difference to the balance (still understeer on turn-in). Would be keen to hear how you feel they've changed the handling of the 328i. I regret not spending extra and getting the adjustable B16's...
You’d be better going down the alignment route to dial out oversteer, suspension isn’t generally going to affect it with the exception of anti roll bar stiffness. Increasing toe out or caster would probably help.
Have you sorted out your turn in understeer? new to F30 chassis and I noticed this too on my first few runs, handling is great however the understeer..
I want to update that headlights some like m3 facelift
dream daily
Hi, I have a n20 engine, the engine noise really too loud is there any way to make it sounds normal ?
Please take the f30 to the drag strip I wanna see
So happy my 328i came with the blue m-sport brakes. Want to repaint them badly tho. Any suggestion on colour? I have an estoril blue f30 328i
Tennis green would pop with that blue
Where do we get the gold big brake kit?
Nooooo the sunroof☹☹
Where you get the m calipers
The wrap ruined it
What are the wheel offsets on front and rear?
Hi! What is brake and brake disk this?
Don't like the black wrap. Silver with black wheels is way cooler! At least to my opinion 🙄
Just why ?
👋👋👍👍👍👍👍👍👍
But does it have a cotton candy machine, turntables, a movie projector, or a fishtank? Didn’t think so. Pimp My Ride did it better.
I am in AWE!!!! So many parts... It's car porn!!!
Can I have those wheels you took off 😢