This was the reason for me to make this video. You just can't find anything that can be so easily understood and followed like in this video. Hope you enjoy part II also.
@@vettef6929 thank you, I just picked up a blue tag trans that came in a pile of parts. Tue 4th gear synchro failed and the bellhousing bolts are missing but otherwise it looks to be in good shape and complete. Your video will be invaluable for reassembling this thing. I got it very cheap but I can tell already I'll have to put a bit of money into it even just for the dmfew issues I have found already.
@@DrewLSsix That was my intension with this video; to help people get this S6-40 disassembled by themselves. Didn't find anything on CZcams that could help me disassemble the trani, so I made two videos so almost anyone with a few tools can do what I did....
This is just what I was looking for. Have a 4th gear that grinds on my 95 Corvette, but only after warming up. Each step seems doable; what I see as problematic is organization and remembering what came out of where. Looking forward to Part 2.
hello you are amazing teacher and and amazing person. thank you for sharing this. i have built many gear boxes on the bench. i was told don't even try this by some people that i respect vary much, i think they are old school witch is good so am i they were just scared. you have gave the confidence if i have to rebuild mine. im in the process of changing from an auto 700 r to a ZF6 and a D44 on my C4. its lots of work but if for some resion i have to pull it out and fix a gear of synchro its easy stuff now. thank you i would build anything with your gudens, men like youself are fading away fast.
Michael, thank you for your comment, I guess you have also seen part 2 and hope you liked it also. I have a 92 Corvette C4 and have done what you are doing now, replacing the 700r and the D36. My Vette signature looks like this: 92 LT1, was auto now ZF 6 sp. 397ci, Ross pistons, 210cc LT4 AFR Eliminator heads, self made TR-intake, 1.6 RR, SR 247/255 .664/.664 112°, 11.0:1 CR, 58mm TB, 36# injectors, Hooker 1 3/4" lt headers, no cats, self made dual SS 3" exhaust sys., X-pipe, MagnaFlow mufflers, 4.10 rear, Brembo 13.5" brakes, bigger stabs, coil overs, C6 Z06 18" wheels. HP 540 / TQ 530
Thanks Dan. Like I wrote before, couldn't find any videos here on youtube that showed me how to take one apart and no one wanted to touch my ZF even certified ZF repair shops!! Mostly they told me that they needed special tools, so I made a few myself, wasn't that hard.
@@socalsalas2983 there is no such thing as a plug and play with the ZF trani. You can contact Bill, the best man ever at www.zfdoc.com/index.htm He has parts and way more knowledge than anybody I know...
hi - working on an older zf m15 and not sure how to remove the int shaft? im sure the pin presses out but found quite alot of tension and didnt want to break the tab off. yes some heat was applied as well.. just really tight? also the input shaft teeth are pretty bad, where can we find a replacement or can we have them recut?
Thanks for this video. It's very helpful. I'm working on my c4 vette. Can you write the website for zf spare parts? I can't understand listening the video. Sorry....
Fantastic video, it help me disassembly my gearbox quickly and save, also, can someone help me find a place where i can by the parts of this corvette gear, any link? Thank you all Marco
Glad I can help people like you to do this job by themselves. The link and address I have postet here several times, just look at the answeres I have given so far.
As far as I know there are no repair kits. You can call or write Bill www.zfdoc.com/index.htm. He has plenty of parts and gaskets. Tell him Arnold from Germany told you to give him a call.
Very innovative use of tools and technique that should help others tackle this intimidating project, thanks for posting!
Excellent video! What a beautiful transmission design!
Thank you. There's never too much information in internet about S6-40.
This was the reason for me to make this video. You just can't find anything that can be so easily understood and followed like in this video. Hope you enjoy part II also.
@@vettef6929 thank you, I just picked up a blue tag trans that came in a pile of parts. Tue 4th gear synchro failed and the bellhousing bolts are missing but otherwise it looks to be in good shape and complete. Your video will be invaluable for reassembling this thing.
I got it very cheap but I can tell already I'll have to put a bit of money into it even just for the dmfew issues I have found already.
@@DrewLSsix That was my intension with this video; to help people get this S6-40 disassembled by themselves. Didn't find anything on CZcams that could help me disassemble the trani, so I made two videos so almost anyone with a few tools can do what I did....
@@vettef6929 I love all of your homemade tools
Excellent video sir, thanks for posting this. This will be very helpful when working on my 95 vette.
Glad you and others like both of my ZF S6 videos
How did your rebuild go? I'll be doing my '94 in the near future
This is just what I was looking for. Have a 4th gear that grinds on my 95 Corvette, but only after warming up. Each step seems doable; what I see as problematic is organization and remembering what came out of where. Looking forward to Part 2.
hello you are amazing teacher and and amazing person. thank you for sharing this. i have built many gear boxes on the bench. i was told don't even try this by some people that i respect vary much, i think they are old school witch is good so am i they were just scared. you have gave the confidence if i have to rebuild mine. im in the process of changing from an auto 700 r to a ZF6 and a D44 on my C4. its lots of work but if for some resion i have to pull it out and fix a gear of synchro its easy stuff now. thank you i would build anything with your gudens, men like youself are fading away fast.
Michael, thank you for your comment, I guess you have also seen part 2 and hope you liked it also.
I have a 92 Corvette C4 and have done what you are doing now, replacing the 700r and the D36.
My Vette signature looks like this:
92 LT1, was auto now ZF 6 sp. 397ci, Ross pistons, 210cc LT4 AFR Eliminator heads, self made TR-intake, 1.6 RR, SR 247/255 .664/.664 112°, 11.0:1 CR, 58mm TB, 36# injectors, Hooker 1 3/4" lt headers, no cats, self made dual SS 3" exhaust sys., X-pipe, MagnaFlow mufflers, 4.10 rear, Brembo 13.5" brakes, bigger stabs, coil overs, C6 Z06 18" wheels. HP 540 / TQ 530
This is an awesome video. Great detail and camera angles. It’s a shame parts are so dang hard to find for this transmission.
Thanks Dan. Like I wrote before, couldn't find any videos here on youtube that showed me how to take one apart and no one wanted to touch my ZF even certified ZF repair shops!! Mostly they told me that they needed special tools, so I made a few myself, wasn't that hard.
@@vettef6929 any idea where we can find new/replacement bearings?
@@DanOnFire I have answered this question several times, please look at the answers I have written
Wow this is such a great video!! I will need to rebuild the transmission on my '94 in the next year or so and this will be a great resource. Thanks!
Awesome.......thanks!
Awesome
amazing video !!!!
Glad you liked it. Part 2 is a little more technical, but can be very helpful if you ever decide to take the shafts apart.
just purchased a core black tag 1992 for 520$ with shifter has 28k miles and it grinds in 6th is this a good price
@@BigWillAuto The price seems to be Ok, but who knows how many parts you will need. They are not cheap!!!
@@vettef6929 would you have to disassemble those gear shafts during a rebuild, or would the kit come with a plug and play kind of thing?
@@socalsalas2983 there is no such thing as a plug and play with the ZF trani.
You can contact Bill, the best man ever at www.zfdoc.com/index.htm He has parts and way more knowledge than anybody I know...
The front cap is made of Rubber on mine it has a hole in it i don't know if it will leak with the hole in it looking for replacement
hi - working on an older zf m15 and not sure how to remove the int shaft? im sure the pin presses out but found quite alot of tension and didnt want to break the tab off. yes some heat was applied as well.. just really tight? also the input shaft teeth are pretty bad, where can we find a replacement or can we have them recut?
Thanks for this video. It's very helpful. I'm working on my c4 vette. Can you write the website for zf spare parts? I can't understand listening the video. Sorry....
You can contact Bill, the best man ever at www.zfdoc.com/index.htm
Did you get it back together? How did it turn out
Fantastic video, it help me disassembly my gearbox quickly and save, also, can someone help me find a place where i can by the parts of this corvette gear, any link? Thank you all
Marco
Glad I can help people like you to do this job by themselves. The link and address I have postet here several times, just look at the answeres I have given so far.
How did your rebuild go? I'm doing my '94 soon(ish)
Hi, Thanks for making the video. Do you have a link to some repair kit for this gearbox?
As far as I know there are no repair kits. You can call or write Bill www.zfdoc.com/index.htm. He has plenty of parts and gaskets. Tell him Arnold from Germany told you to give him a call.
@@vettef6929 Thanks, I emailed him lets see. If you now any complete for sale I would be interested to buy a complete gearbox.
Where did you get parts?
This question has been asked so many times, look below and you will find what I wrote