I use a coil gun made by HVAC Guys. It’s pretty much a Nu Calgon clone. Way better than a pump sprayer. I love how detailed you are with servicing the unit. I try my best to make a unit look new again whenever I’m called out to clean a unit
I Love Love love my coil guns .I have 2 one for orange (micro channel cleaner) and 1 for Nubright.I got my second one this year but it was hard to find. I think the words getting out. And just to mention there are about 4-5 techs on here I will watch, and you are one of them. You do an excellent job explaining things and you have ease to you demeanor as well as being very thorough! Keep up the good work!
I have been doing service work for 25 yrs and I have been using a coil gun for at least 10 yrs I love it only take a fraction of the time to clean one. I also had the little pressure washer for indoor coils man it’s the trick I love it to I use it on air-handlers and AWUF- air handlers works really good
Thanks - looks like a handy tool - When I sprayed my coils on my Rheem pkg unit with a hose it bent the edges of most of them - looks like the Nubright gun reduces the pressure so that won't happen...
Take care when cleaning it out after a service - if the smallest piece of dirt or grit gets up into the nozel "particularly the clear tube with the filter " it will stop up the flow , but otherwise it works pretty good. I always like to try and blast out a drain hole at the bottom before I proceed just so I'm not blowing sticks and leaves all up on the coil.
You did a great job!!! Much better than a lot of the other videos I’ve watched were so many people halfass it. One question. Can, or should the fan motor/shaft be lubricated with anything?
Why a special "gun"? Why not use your foam cannon right after shampooing your vehicle. Just add the solution, or make your own (dish soap and vinegar). It seems to me, any hose-end sprayer will work.
‘How do you use it?’ Throw it in the trash. Wanna waste product? Use this. Fundamentally bad product. You’re supposed to put the cleaner into the coil so it foams AFTER application and pushes the debris out of the coil as it foams.
@@TaddyDigest I’m repeating the first thing you said in the video. It’s kind of like when Home Depot sells a 6”x6”x6” single wall tee. Just because they sell it doesn’t mean it’s a good thing to use.
Nice use of gloves and glasses right after you said to use them.
I don’t think I can tell you how to clean a unit man.
Thanks for giving us wisdom…
God bless you.
I use a coil gun made by HVAC Guys. It’s pretty much a Nu Calgon clone. Way better than a pump sprayer. I love how detailed you are with servicing the unit. I try my best to make a unit look new again whenever I’m called out to clean a unit
I Love Love love my coil guns .I have 2 one for orange (micro channel cleaner) and 1 for Nubright.I got my second one this year but it was hard to find. I think the words getting out. And just to mention there are about 4-5 techs on here I will watch, and you are one of them. You do an excellent job explaining things and you have ease to you demeanor as well as being very thorough! Keep up the good work!
I have been doing service work for 25 yrs and I have been using a coil gun for at least 10 yrs I love it only take a fraction of the time to clean one. I also had the little pressure washer for indoor coils man it’s the trick I love it to I use it on air-handlers and AWUF- air handlers works really good
I wish I could afford an indoor electric coil cleaner lol.
I rock the nu-brite in my Van. The company I work for has it constantly on deck. Works great!
Great video and good instructional on cleaning.
Great job! I wish everybody who cleans or fixes anything was that thorough!
Thank you my friend
I bought this coil Gun and have this exact unit. Thanks so much for this video. Gonna help me tremendously.
your welcome Glad you watched 👀 😊
Soild video, my man. You definitely take pride in your work.
Thanks - looks like a handy tool - When I sprayed my coils on my Rheem pkg unit with a hose it bent the edges of most of them - looks like the Nubright gun reduces the pressure so that won't happen...
Great job tad great information thanks for the video
Awesome! Thanks for the info and knowledge!
You're welcome thank you so much for watching
Nice video bruh👍🏿👏🏿👏🏿
Great video Taddy. Thanks.
You're welcome my brother
Thanks for the tip
I'm more impressed with his quality of work. It's hard to find good people. Assuming his prices are crazy tho lol.
Coil gun works great I would recommend it
Just bought the cleaning gun and watched your video. Simple and to the point. Great job!
Thank you very much. I'm glad you like the video and glad you got the cleaning gun. It works so well.
That’s what I use it on ratio 10:1 and no issues at all
Been using that gun for years 🍻
Great video with that sprayer
Thank you my friend
Take care when cleaning it out after a service - if the smallest piece of dirt or grit gets up into the nozel "particularly the clear tube with the filter " it will stop up the flow , but otherwise it works pretty good. I always like to try and blast out a drain hole at the bottom before I proceed just so I'm not blowing sticks and leaves all up on the coil.
Thank you for the great advice my brother
It reminds me a lot of a garden hose foam cannon. It is exactly like my chemical guys car foamer
You did a great job!!! Much better than a lot of the other videos I’ve watched were so many people halfass it. One question. Can, or should the fan motor/shaft be lubricated with anything?
It has sealed bearing so it does not have to be lubricated.
@@TaddyDigest I figured it probably did. Just wanted to make sure. Thank you for your answer!
I would love to have one of them
nice job bro
I got the viper foam gun it works good I use the tri power in it from time to time on 5-1 or 10-1 if I’m out of my viper foams nice
same coil gun at Trane for $40
Can you do one for an indoor evaporator or mini split?
Need a good wet vac then
Whats the difference in the 4 cleaners you showed in the beginning
Coil Cleaner Selection Guide from Nu-Calgon Website
www.nucalgon.com/coil-cleaner-selection-guide/
Why don't they put a simple Ratio Number (0-3-4-6-9-10) instead of a Letter that needs to be cross referenced to get a non-linear Ratio/Letter??
Maybe just a safe space, probably.
Why not use a bug sprayer with white vinegar, dawn soap and water.
Why would you
Just bought one and love it......
Is it 10 to 1 water to cleaner or cleaner to water
water to cleaner
I use viper, very strong..
Good choice
I think I was there... ;)
You were not there bro hahahahaha 😂 🤣 😆
Why a special "gun"? Why not use your foam cannon right after shampooing your vehicle. Just add the solution, or make your own (dish soap and vinegar). It seems to me, any hose-end sprayer will work.
I'm really curious. What makes this gun better than just using what you might already have around the garage?
You don't have to pump up a sprayer
You don't have to mix the chemicals these premixes for you
It has a foam gun, so it foams for you
@@TaddyDigest Never mind. Who said anything about a pump?
‘How do you use it?’ Throw it in the trash. Wanna waste product? Use this. Fundamentally bad product. You’re supposed to put the cleaner into the coil so it foams AFTER application and pushes the debris out of the coil as it foams.
What do you mean? How do I use it
I showed you in the video how to use it
I don't understand
@@TaddyDigest I’m repeating the first thing you said in the video. It’s kind of like when Home Depot sells a 6”x6”x6” single wall tee. Just because they sell it doesn’t mean it’s a good thing to use.
Very bizarre, what the hell are you talking about.
@@chrissipple1018 trash
I just used it on mine and my parents house. Works better that inside out method and far simpler too.