Good idea. cutting the bevel in the wood instead of the tile probably makes more sense if you want to make more than just one tile.. also adding vegetable oil to the aluminium foil and loosely insert it from the top makes it a lot easier to get the gypsum out again once it’s cured. :) I currently do that for a 3x4 m wall, and made 600 of 900 needed tiles so far.. if I would disassemble the frame every time and carve out each tile by hand, I would need over a year to get where I got in 2 weeks now :)
this is my favorite way to make stone/rock/brick"face" If I may suggest another technique: use the clear tape (you had in this video) and apply to a sheet of A. Foil. apply to the backside, NOT the plaster side. I found it gives more strength and able to form the shape and hold better. lastly, always try to use the "extra Strength" foil. Or thicker foil. Hope it helps as it did for me. Blessings to all
Happy New year...Suggestion remove the water mark from the center of the video does not allow the viewer to watch the video as should be...place it on the top left side in small letters so it will not get annoyingly painful to in your face type of thing...thanks..cleaver idea with the foil
Good idea. cutting the bevel in the wood instead of the tile probably makes more sense if you want to make more than just one tile.. also adding vegetable oil to the aluminium foil and loosely insert it from the top makes it a lot easier to get the gypsum out again once it’s cured. :) I currently do that for a 3x4 m wall, and made 600 of 900 needed tiles so far.. if I would disassemble the frame every time and carve out each tile by hand, I would need over a year to get where I got in 2 weeks now :)
Dear Sir, how did you get that bevel on the wood and what are the dimensions of your frame. Thank you in advance.
Wow. Nice video and thanks for showing your procedure. I might try this myself.
this is my favorite way to make stone/rock/brick"face"
If I may suggest another technique:
use the clear tape (you had in this video) and apply to a sheet of A. Foil. apply to the backside, NOT the plaster side. I found it gives more strength and able to form the shape and hold better.
lastly, always try to use the "extra Strength" foil. Or thicker foil.
Hope it helps as it did for me.
Blessings to all
Simple and efficient. Very good work!
Muy buenos consejos gracias por compartir saludos desde aguascalientes ags mexico
Muy hermoso ,gracias por compartir.
بسم الله مشاء الله فنان فنان فنان تسلم ايدك ودماغم يا فنان مشاء الله تبارك الله
Very well done. Excellent job.
Excellent bro👍🏿👍🏿👍🏿
Wow very impressive. 👍
What are the dimensions of frame please?
What is the material? Excellent idea
Beau travail bravo.
Wow very good but please tell me me he use gypsum or cement
Please assist me with the mixture contents and ratio.
Good work
untuk pewarnanya di campur pakai cat tembok bisa kah?
nice skills
Mantap tenan...
Magnífico
Excelente
Happy New year...Suggestion remove the water mark from the center of the video does not allow the viewer to watch the video as should be...place it on the top left side in small letters so it will not get annoyingly painful to in your face type of thing...thanks..cleaver idea with the foil
Cool
Very Nice Job 👏👏👏
Thank you
super , continue...
Thank you🙏👍
@@CreArth 9oooooooo9oooooooo9o9oooo99oooooooo
Thanks sir
Bermanfaat sekali terus berkarya bang bro...sukses dan sehat selalu buat bang bro ...ammiiinn....👍👍👍😊👉☕☕☕
asyiappp..🙏
Cool 👍👍👍
Thanks
bravo
Mantap
👍🏼👍🏼👍🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼
🙏👍👍
hello may i ask about the cement you use
is it really a white cemment or something
or maybe adhesive
I only need 15m2
bahan ya apa saja bosss
Super keren gan jos
siapp
Много времени потрачено на производство одного кирпича...
bahan nya apa
😂😂😂😂😂❤❤❤❤❤❤❤
👌👌👌👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🙏🇲🇦🇨🇵
I9