1990 Chevy 4wd gets a heads and cam swap. Hot rod 4x4!! Part 1
Vložit
- čas přidán 17. 11. 2022
- My old 4wd blew a head gasket so I figured if I'm going into it that deep then I might as well hot rod it a little bit!
Check out my merch!!
thisnthatgarage.myspreadshop....
Send me stuff!!
This N That Garage
PO Box 489
Pleasant View, TN 37146 - Auta a dopravní prostředky
No better way to spend a Friday than watching an episode of this and that .
20000% agree
Even tho it’s a year later the fact I’m watching on a Friday is nice
Appreciate all the hard work that goes into these videos! Not only entering but highly informative. BTW my grandfather who is no longer with us always made me lap valves... sweep the shop or lapping valves. 😆 wouldn't trade those days for anything.
I enjoy modern tech, but I am so glad my formative years were in the 70's. It is so enjoyable to watch you loving the work you do!
This truck just makes me happy inside. Everything is so wrong but so right at the same time.
I'm going to start here and edit to add just because I'll forget my point. So yeah, I ended up just BUYING a stupid chevrolet power steering pulley puller. EVERY time I had to pull something or do work on an engine the darn POWER STEERING PULLEY needed to come of for one reason or another. After the second time I just broke down and bought one. It was probably one of my better put away but remember I have it tools..
edit: man oh man, it's that camera that slows everything down.. rain doesn't help nor does the cold and everything you have to do to compensate for either! It's ALWAYS a great day when you upload for us all to enjoy, thank again for the hard work you share with us!!
The shop looks excellent can’t wait !!old and slow is the way to go lol you don’t have any choice in that but love watching you do the old-school engine job Musta got lucky on the ones I did cams and heads and it worked out great… that’s an interesting fireplace you have the dragon you say hmmmm … stay warm great videos don’t you dare stop releasing on Friday nights made my evening🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
Good video anybody over 30 knows that plans don’t always work out. (life is life) Sometimes you have to slow down to a trot.
Best way to spend a cold nite watching the best you tube channel!!!!!!Very interesting.Can t wait to see garage done
Keep them rolling!!!?
Greatest respect to you bud I had no idea you are on your own, your videos are put together perfect.well done.
Good gravy, don't that figure pops. We slip we break we damage things. Just a mechanics life. Keep up the great work pops and I will keep on watching
Reminds me of my 91 k1500. -5 degrees and it started without an issue. I sold it ten years ago, I still see it running around this busy city. Makes me want another.
you can also take a cold chisel and take some metal away to get that blot out i have done it on my 95 and it works just fine
We are gettin’ older and slower, but can’t do a dang thing about it 😆 Another great video, no worries about how long things take to get edited and posted. You have a life, family and full time job. Don’t burn out, we enjoy what you bring us.
Excited to see this project done! Great video, you explain things very well. Learn something new every video!
My dad always drove cars that one could reasonably describe as "needing a bit of love". Which meant that every couple of years, there'd be an engine all over the basement floor. I was always amazed that he'd get them back together again, running much better than when he started. The first such I remember was a Ford Fairlane early-1960s wagon that he took apart in perhaps 1968. I was a wee lad of 5, but I remember oily pans all over his workbench with valves and rockers and lifters and the like. I don't think we replaced that vehicle until 1971 or so with a 1968 Firebird. But TBH, I think I'm learning more watching your channel than I learned from all my dad's forays into engine repair. He grew up during WWII in the UK. It was inconceivable to him to NOT do all his own engine repairs, including complete rebuilds...
👍👍
Nice job explaining things as you go. I wonder if there is enough room on the power steering pulley to make a hole without making it unbalanced. Also, many years ago I remember valve grinders that looked like miniature hand powered mixers. If you could find one of those somewhere, that would speed up your valve lapping. Looking forward to next week;)
New sub!! This was the best top engine break down and reassembly I’ve watched!! Can’t wait to view more content!!!
Preshate that. 👍
Good job sir. Enjoyed it as always. You are a bizzee man.
Watching you work them heads and explain it casually makes it seem simple convinced me to subscribe
No better way to relax on the weekends than watching your videos and relaxing very informative and educational my kids too are your fans keep it coming God bless
Your not getting slower your getting it done thanks for another great video can’t wait to hear the new cam
Woo hoo! Highlight of my week! 💙👊🏼
Your videos are very interesting. I wish that when I was a younger man I would’ve gotten into working on cars but I just didn’t now I’m 73 years old. I’ve been tinkering a little bit. That’s why watching videos that you make and others make I learn things and I appreciate what you do and you’re a darn good teacher. Plus, you’re very entertaining.
Thanks for the videos there fun to watch
Great video!!! I know why your projects are taking so long. You have to explain everything to a camera! Lol thanks for the videos
That adds quite a bit of time to things for sure.
Great job about degreeing cams! Haven't seen very many people talk about that important feature! As usual, YOU are a very interesting and funny guy to watch, educational and a little southern charm to boot!
Cool good luck on the motor hope to see it in the next video
Thanks for all the hard work making my Fridays even better. Love that Chevy truck
Chad - it might just be your sense of humor and the "laugh at yourself" attitude that keeps me coming back video after video. Dude, I so appreciate you. You are a friend a friend would like to have. Great content as always. Now let's finish this video and get the Chevy back on the roadeo. Winter's a commin' and that 4-be-4 will totally be needed!
Well now, I'm learning things I never put into practice . You take the time to explain the purpose and then put it into your re build. Thankx for your time to explain it in terms I can understand. can't wait for the next lesson ( video ), God Bless and stay healthy. Stu from Canada,,,,,,,,,,,,
You would think after all the time you spend on these machine you'd know a thing or too, but every video I watch, I'm learning even at 55. Thank you for what you do well.
I had that problem when I put a 327/375hp cam in a 283 cu.in motor. I pushed the studs out of heads, it ran about month then valves wouldn’t adjust. We figured out what was wrong. Back in 1969 we didn’t have screw in studs. I found a set of 327/300hp heads. Really woke up that 283. Kept blowing exhaust pipes. Wish I still had that little yellow 57 Chevy. Diamond pleated interior, Hurst shifter. I only got 3 miles per gallon. Like the positive vibe your channel has. Plus the down home education value this channel has. You really take the mystery out of mechanical stuff. Don’t know what day you filmed this, but darned tooting it’s got cold in the Volunteer state.
You really have become one of my favorite channels I think you do very well and do a dam good job on your projects hope you grow and prosper in your walk of life God bless you and yours
👍👍
Excellent video Chad :) great upgrade to old Red GM truck and looking forward more videos too on! Yes time flies by anymore when working or have fun to and I know too amazing how time goes zooming past!
You're not slowing down from my perspective. I'm super slow on my projects. Always afraid to start the next big thing but once I do always glad I did. Just replaced my first clutch at 53 yrs old.
You can also use a power drill, a rubber hose held on by the drill and the other end of the hose to the valve and go down town on it, much faster and better results.
Just saw the part where you used the method👌
Your a busy guy doing everything yourself it must be quite a challenge. Love your videos and how you approach things, very realistic. Cheers for the vids.
You sure don't show this so called old age. Your doing just fine. Keep up the good work. We all love the videos.
You don't hear me moan and groan trying to get going in the morning either. 🤣
Wow I learn something new in every video !! Awesome I'm doing my truck too 90 chevy
Well Chad, to be truthful this was 10 times more interesting than I thought it would be. Great video, as usual.
Art from Ohio
Thanks! Always love your content. Your hard work is very much appreciated 👊🏼
👍
lotta work there! nice job sir! always look forward to an upload.
Absolutely love you’re channel I continuously learn new things watching ya and greatly appreciate the content my friend
awesome work again my friend...go on and i'll see youre next vid soon......greet from Holland
Chad you do a fine job of explaining step by step exactly what you're trying to achieve. I was highly disappointed to find I have to wait till next week to see your truck run again 😭 see you next week and keep up the great work 👍✌️🇺🇲
Exactly what i meant when i asked to continue posting what you're doin! Thank you for the content you create, and I dont care how long it takes ya, I would take longer. Keep up the good work bud.
Projects are taking longer because you are videoing and explaining. I learned a ton with this week's video. Thank you.
That definitely slows me down!
in one of your other videos,you hurt your foot,now this one the platform slipped and your knee smashed the headlight! yet you can still laugh..you are amazing!
I actually think I have nerve damage in that foot now. 🤦♂️
@@ThisNThatGarage thats bad..please be careful
You did great.
Things always take longer than we think.
Dont cut the vids short, to get everything in one video, i like it when you make them into severel parts instead, so the explaining and talking can continue as is.. Awesome work, and awesome explaining.. 👍
As a busy single man working 18hour days I felt that section of the video 😂
This has been one of my top ten videos of automotive work I have seen. He did everything identical to what I do. You have earned a sub from me. Glad I found this.
“Older and slower”… I feel that every day. I did ok till I hit my 50s, then my ole check engine light came on 🤣
Best day of the week👍 time to sit down chill and watch this n that garage.
Yes you are getting older, we all are I think a lot of your time loss is spent on moving the cameras, we are glad that you do bring quality to videos. I'm still trying to figure in how many times I will fail at every step.
Central California watching
I keep saying the same thing about how much longer things take lately. At times I'll blame in on my age, but then again many times it takes more time moving the camera around and setting up for the best shot than it does to actually do the work. Anyways, keep up the good work, I'm definitely a fan, you remind me a lot like myself.
Great channel. I believe I could drive a beer and tell lies with you.
My Toyota did the same exact thing. Drove it a long time like that. Never overheated. Just used water.
Figured exhaust bolts would've snapped before intake
Fascinating This N That! Looking forward to part 2!
You're not getting slower, you're getting smarter, you take your time, doing it right the first time. Like you said all know it All's can't do it any faster, this is my shop,but out.
As always I get a lot of enjoyment and knowledge from your stories and experience.
But reading the comments section is a hoot....it's never gonna work, or you shoulda, woulda, coulda...
Thanks for the hard work and passing on your skills.
I don't pay no attention to the knowitalls!!
Sitting here watching You in my This N That Dude T-shirt and i got to tell you it is the most comfortable shirt I have ever worn. Fits my fat belly fine and is very soft. My wife looked inside and she said it was very well sewn and even she was impressed which is saying a lot. Enjoy your work and I feel we are of kindred spirit. At 67 I have begun fiddling with my old truck more and fixing things I have put off for a couple years. thanks and keep up the good work.
Preshate you getting a shirt! Glad you're working on stuff too! 👍
Always enjoy the way you go indepth in explaining what you're doing. Plus I get a laugh or two thanks for sharing your knowledge
Understand team solo! Another great video punched with in depth knowledge..Blessings and respect to the grind and hustle!
Looking good Chad never mind how long it takes you guarantee it will run right with your expertise great detail shows you've been around motors all your life
You had me at "hot rod her"
Central California watching.
Mr. I do believe that that was the best example of lapping valves in that exist on you tube. Really great job. Very impressed. Love the channel
smart cookie .love the tips i like building cars trucks learn something new all the time, thanks. buddy
Great work! So happy you’re hotting one…not that I don’t love your reviving clips.
I know your back was killing you after being hunched over like that, with the engine still in the truck and the fact it's a taller truck. Great video, I can't wait to see it roast the tires.
I appreciate explaining the process. Love the channel 😊.
My favorite CZcams channel!This and that garage is the bomb.Great content.Wonderful presentation Keep em coming!!!
Preshate it.
Lil Dude, I had a Z71 just like that with same window tint! Mine was not 3/4 ton though haha. Nice videos btw, I'm a new subscriber.
👍
Thank you for sharing your knowledge with us. For some of us are aspiring to be motorheads without all the book knowledge. Again thank you.and have a very Blessed and Happy Thanksgiving
I will guarantee you sir that those heads will outflow double humpy Chevy anything but a power pack head is the only thing that will outflow those heads but as I said they're prone to crack so the good thing you had a mind to flex and check but you'll be more than happy with the power they make a guarantee that's saying pull stumps out of the ground if you got the right transmission with it to handle it
Fantastic and enjoyable video and informative it's been a while since I done
Motor work on a gm vehicle thanks for refresher course 🤠
Good videos. And YESSSS , age complicates competion schedules.
No matter what u do , i like it. Respect for all the hard Work u do for and on this Channel.
Those exhaust valves look like ours on our 4.7 Jeep stroker. Was thinking bout buying new valves but your pro tip (drill bit and hose) on lapping valves may save us from having to buy valves!!! Btw my son and I just discovered your channel. Top notch!!
👍👍
Had Chad! Hope y'all eased up and had a great thanksgiving sir! Another fantastic production by the production and T n T productions sir, Bravo!
Good info. Loved the video.
Backyard butchery 😂 you sell yourself short buddy you always get the job done and make it intresting to watch, plus when you get to giggling when something happens i just cant help but join with ya 🤣🤣🤣 thanks for the update on the shop i was going to ask about that 👌🏾👍🏾 give it the old tryyyyy 😀👍🏾
Thanks 👍
Hell yeah just a good ole boy having some fun
A big salute to all ya do!
Im a big mustie 1 fan but I have to say that I think I enjoy your videos even more and I wish you every success. You do a great job of just being an honest down to earth kind of guy...I think you might even be good enough to be an Aussie.
I'm gonna visit Australia one of these days. It's a bucket list item.
Nice truck!!!
very good video! love this kinda content!!!!
Cold up here in Delaware too
lots of good knowledge in this video. Thank you
Great content waiting for next week
Absolutely love your content, do what you can when you can, we will wait!..
Power to you. from 🏴
A vacuum hose on the stem portion of the valve, then the other end of the vacuum hose in a drill works really well for lapping valves. Just gotta remember to oil the valve guides down some and go slow with the drill. Sure it easier than lapping valves by hand and those suction cups don't always stick, they slid around too easy imo.
Good video. Love the TNT garage butchery comment. Shed is talking shape... Did you dig all the holes with that manual post hole digger I saw. That would take me several days to do, and hurt for a week. Like it when you explain things out. Can't wait for the next one.
Great Video!! I love your teaching method!
Preshate it.
Great video well done like always!
I live about a hr away from Knoxville tn love your content keep up the good work
What an education thanks fascinating to see how things are done.
You cant rush perfection lol
Very interesting. Well done 👍🏻